+++ /dev/null
-[DEFAULT]
-
-#
-# Options defined in oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues=false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete=false
-
-# Size of RPC connection pool. (integer value)
-#rpc_conn_pool_size=30
-
-# Qpid broker hostname. (string value)
-#qpid_hostname=localhost
-
-# Qpid broker port. (integer value)
-#qpid_port=5672
-
-# Qpid HA cluster host:port pairs. (list value)
-#qpid_hosts=$qpid_hostname:$qpid_port
-
-# Username for Qpid connection. (string value)
-#qpid_username=
-
-# Password for Qpid connection. (string value)
-#qpid_password=
-
-# Space separated list of SASL mechanisms to use for auth.
-# (string value)
-#qpid_sasl_mechanisms=
-
-# Seconds between connection keepalive heartbeats. (integer
-# value)
-#qpid_heartbeat=60
-
-# Transport to use, either 'tcp' or 'ssl'. (string value)
-#qpid_protocol=tcp
-
-# Whether to disable the Nagle algorithm. (boolean value)
-#qpid_tcp_nodelay=true
-
-# The number of prefetched messages held by receiver. (integer
-# value)
-#qpid_receiver_capacity=1
-
-# The qpid topology version to use. Version 1 is what was
-# originally used by impl_qpid. Version 2 includes some
-# backwards-incompatible changes that allow broker federation
-# to work. Users should update to version 2 when they are
-# able to take everything down, as it requires a clean break.
-# (integer value)
-#qpid_topology_version=1
-
-# SSL version to use (valid only if SSL enabled). valid values
-# are TLSv1 and SSLv23. SSLv2 and SSLv3 may be available on
-# some distributions. (string value)
-#kombu_ssl_version=
-
-# SSL key file (valid only if SSL enabled). (string value)
-#kombu_ssl_keyfile=
-
-# SSL cert file (valid only if SSL enabled). (string value)
-#kombu_ssl_certfile=
-
-# SSL certification authority file (valid only if SSL
-# enabled). (string value)
-#kombu_ssl_ca_certs=
-
-# How long to wait before reconnecting in response to an AMQP
-# consumer cancel notification. (floating point value)
-#kombu_reconnect_delay=1.0
-
-# The RabbitMQ broker address where a single node is used.
-# (string value)
-#rabbit_host=localhost
-
-# The RabbitMQ broker port where a single node is used.
-# (integer value)
-#rabbit_port=5672
-
-# RabbitMQ HA cluster host:port pairs. (list value)
-#rabbit_hosts=$rabbit_host:$rabbit_port
-
-# Connect over SSL for RabbitMQ. (boolean value)
-#rabbit_use_ssl=false
-
-# The RabbitMQ userid. (string value)
-#rabbit_userid=guest
-
-# The RabbitMQ password. (string value)
-#rabbit_password=guest
-
-# The RabbitMQ login method. (string value)
-#rabbit_login_method=AMQPLAIN
-
-# The RabbitMQ virtual host. (string value)
-#rabbit_virtual_host=/
-
-# How frequently to retry connecting with RabbitMQ. (integer
-# value)
-#rabbit_retry_interval=1
-
-# How long to backoff for between retries when connecting to
-# RabbitMQ. (integer value)
-#rabbit_retry_backoff=2
-
-# Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-#rabbit_max_retries=0
-
-# Use HA queues in RabbitMQ (x-ha-policy: all). If you change
-# this option, you must wipe the RabbitMQ database. (boolean
-# value)
-#rabbit_ha_queues=false
-
-# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
-# (boolean value)
-#fake_rabbit=false
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet
-# interface, or IP. The "host" option should point or resolve
-# to this address. (string value)
-#rpc_zmq_bind_address=*
-
-# MatchMaker driver. (string value)
-#rpc_zmq_matchmaker=oslo.messaging._drivers.matchmaker.MatchMakerLocalhost
-
-# ZeroMQ receiver listening port. (integer value)
-#rpc_zmq_port=9501
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts=1
-
-# Maximum number of ingress messages to locally buffer per
-# topic. Default is unlimited. (integer value)
-#rpc_zmq_topic_backlog=<None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir=/var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP
-# address. Must match "host" option, if running Nova. (string
-# value)
-#rpc_zmq_host=cinder
-
-# Seconds to wait before a cast expires (TTL). Only supported
-# by impl_zmq. (integer value)
-#rpc_cast_timeout=30
-
-# Heartbeat frequency. (integer value)
-#matchmaker_heartbeat_freq=300
-
-# Heartbeat time-to-live. (integer value)
-#matchmaker_heartbeat_ttl=600
-
-# Size of RPC greenthread pool. (integer value)
-#rpc_thread_pool_size=64
-
-# Driver or drivers to handle sending notifications. (multi
-# valued)
-#notification_driver=
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-#notification_topics=notifications
-
-# Seconds to wait for a response from a call. (integer value)
-#rpc_response_timeout=60
-
-# A URL representing the messaging driver to use and its full
-# configuration. If not set, we fall back to the rpc_backend
-# option and driver specific configuration. (string value)
-#transport_url=<None>
-
-# The messaging driver to use, defaults to rabbit. Other
-# drivers include qpid and zmq. (string value)
-#rpc_backend=rabbit
-
-# The default exchange under which topics are scoped. May be
-# overridden by an exchange name specified in the
-# transport_url option. (string value)
-#control_exchange=openstack
-
-
-#
-# Options defined in cinder.exception
-#
-
-# Make exception message format errors fatal. (boolean value)
-#fatal_exception_format_errors=false
-
-
-#
-# Options defined in cinder.quota
-#
-
-# Number of volumes allowed per project (integer value)
-#quota_volumes=10
-
-# Number of volume snapshots allowed per project (integer
-# value)
-#quota_snapshots=10
-
-# Number of consistencygroups allowed per project (integer
-# value)
-#quota_consistencygroups=10
-
-# Total amount of storage, in gigabytes, allowed for volumes
-# and snapshots per project (integer value)
-#quota_gigabytes=1000
-
-# Number of volume backups allowed per project (integer value)
-#quota_backups=10
-
-# Total amount of storage, in gigabytes, allowed for backups
-# per project (integer value)
-#quota_backup_gigabytes=1000
-
-# Number of seconds until a reservation expires (integer
-# value)
-#reservation_expire=86400
-
-# Count of reservations until usage is refreshed (integer
-# value)
-#until_refresh=0
-
-# Number of seconds between subsequent usage refreshes
-# (integer value)
-#max_age=0
-
-# Default driver to use for quota checks (string value)
-#quota_driver=cinder.quota.DbQuotaDriver
-
-# Enables or disables use of default quota class with default
-# quota. (boolean value)
-#use_default_quota_class=true
-
-
-#
-# Options defined in cinder.service
-#
-
-# Interval, in seconds, between nodes reporting state to
-# datastore (integer value)
-#report_interval=10
-
-# Interval, in seconds, between running periodic tasks
-# (integer value)
-#periodic_interval=60
-
-# Range, in seconds, to randomly delay when starting the
-# periodic task scheduler to reduce stampeding. (Disable by
-# setting to 0) (integer value)
-#periodic_fuzzy_delay=60
-
-# IP address on which OpenStack Volume API listens (string
-# value)
-#osapi_volume_listen=0.0.0.0
-
-# Port on which OpenStack Volume API listens (integer value)
-#osapi_volume_listen_port=8776
-
-# Number of workers for OpenStack Volume API service. The
-# default is equal to the number of CPUs available. (integer
-# value)
-#osapi_volume_workers=<None>
-
-
-#
-# Options defined in cinder.ssh_utils
-#
-
-# Option to enable strict host key checking. When set to
-# "True" Cinder will only connect to systems with a host key
-# present in the configured "ssh_hosts_key_file". When set to
-# "False" the host key will be saved upon first connection and
-# used for subsequent connections. Default=False (boolean
-# value)
-#strict_ssh_host_key_policy=false
-
-# File containing SSH host keys for the systems with which
-# Cinder needs to communicate. OPTIONAL:
-# Default=$state_path/ssh_known_hosts (string value)
-#ssh_hosts_key_file=$state_path/ssh_known_hosts
-
-
-#
-# Options defined in cinder.test
-#
-
-# File name of clean sqlite db (string value)
-#sqlite_clean_db=clean.sqlite
-
-
-#
-# Options defined in cinder.wsgi
-#
-
-# Maximum line size of message headers to be accepted.
-# max_header_line may need to be increased when using large
-# tokens (typically those generated by the Keystone v3 API
-# with big service catalogs). (integer value)
-#max_header_line=16384
-
-# Timeout for client connections' socket operations. If an
-# incoming connection is idle for this number of seconds it
-# will be closed. A value of '0' means wait forever. (integer
-# value)
-#client_socket_timeout=900
-
-# If False, closes the client socket connection explicitly.
-# Setting it to True to maintain backward compatibility.
-# Recommended setting is set it to False. (boolean value)
-#wsgi_keep_alive=true
-
-# Sets the value of TCP_KEEPALIVE (True/False) for each server
-# socket. (boolean value)
-#tcp_keepalive=true
-
-# Sets the value of TCP_KEEPIDLE in seconds for each server
-# socket. Not supported on OS X. (integer value)
-#tcp_keepidle=600
-
-# Sets the value of TCP_KEEPINTVL in seconds for each server
-# socket. Not supported on OS X. (integer value)
-#tcp_keepalive_interval=<None>
-
-# Sets the value of TCP_KEEPCNT for each server socket. Not
-# supported on OS X. (integer value)
-#tcp_keepalive_count=<None>
-
-# CA certificate file to use to verify connecting clients
-# (string value)
-#ssl_ca_file=<None>
-
-# Certificate file to use when starting the server securely
-# (string value)
-#ssl_cert_file=<None>
-
-# Private key file to use when starting the server securely
-# (string value)
-#ssl_key_file=<None>
-
-
-#
-# Options defined in cinder.api.common
-#
-
-# The maximum number of items that a collection resource
-# returns in a single response (integer value)
-#osapi_max_limit=1000
-
-# Base URL that will be presented to users in links to the
-# OpenStack Volume API (string value)
-# Deprecated group/name - [DEFAULT]/osapi_compute_link_prefix
-#osapi_volume_base_URL=<None>
-
-
-#
-# Options defined in cinder.api.middleware.auth
-#
-
-# Treat X-Forwarded-For as the canonical remote address. Only
-# enable this if you have a sanitizing proxy. (boolean value)
-#use_forwarded_for=false
-
-
-#
-# Options defined in cinder.api.middleware.sizelimit
-#
-
-# Max size for body of a request (integer value)
-#osapi_max_request_body_size=114688
-
-
-#
-# Options defined in cinder.backup.driver
-#
-
-# Backup metadata version to be used when backing up volume
-# metadata. If this number is bumped, make sure the service
-# doing the restore supports the new version. (integer value)
-#backup_metadata_version=2
-
-
-#
-# Options defined in cinder.backup.drivers.ceph
-#
-
-# Ceph configuration file to use. (string value)
-#backup_ceph_conf=/etc/ceph/ceph.conf
-
-# The Ceph user to connect with. Default here is to use the
-# same user as for Cinder volumes. If not using cephx this
-# should be set to None. (string value)
-#backup_ceph_user=cinder
-
-# The chunk size, in bytes, that a backup is broken into
-# before transfer to the Ceph object store. (integer value)
-#backup_ceph_chunk_size=134217728
-
-# The Ceph pool where volume backups are stored. (string
-# value)
-#backup_ceph_pool=backups
-
-# RBD stripe unit to use when creating a backup image.
-# (integer value)
-#backup_ceph_stripe_unit=0
-
-# RBD stripe count to use when creating a backup image.
-# (integer value)
-#backup_ceph_stripe_count=0
-
-# If True, always discard excess bytes when restoring volumes
-# i.e. pad with zeroes. (boolean value)
-#restore_discard_excess_bytes=true
-
-
-#
-# Options defined in cinder.backup.drivers.swift
-#
-
-# The URL of the Swift endpoint (string value)
-#backup_swift_url=<None>
-
-# Info to match when looking for swift in the service catalog.
-# Format is: separated values of the form:
-# <service_type>:<service_name>:<endpoint_type> - Only used if
-# backup_swift_url is unset (string value)
-#swift_catalog_info=object-store:swift:publicURL
-
-# Swift authentication mechanism (string value)
-#backup_swift_auth=per_user
-
-# Swift authentication version. Specify "1" for auth 1.0, or
-# "2" for auth 2.0 (string value)
-#backup_swift_auth_version=1
-
-# Swift tenant/account name. Required when connecting to an
-# auth 2.0 system (string value)
-#backup_swift_tenant=<None>
-
-# Swift user name (string value)
-#backup_swift_user=<None>
-
-# Swift key for authentication (string value)
-#backup_swift_key=<None>
-
-# The default Swift container to use (string value)
-#backup_swift_container=volumebackups
-
-# The size in bytes of Swift backup objects (integer value)
-#backup_swift_object_size=52428800
-
-# The number of retries to make for Swift operations (integer
-# value)
-#backup_swift_retry_attempts=3
-
-# The backoff time in seconds between Swift retries (integer
-# value)
-#backup_swift_retry_backoff=2
-
-# Compression algorithm (None to disable) (string value)
-#backup_compression_algorithm=zlib
-
-
-#
-# Options defined in cinder.backup.drivers.tsm
-#
-
-# Volume prefix for the backup id when backing up to TSM
-# (string value)
-#backup_tsm_volume_prefix=backup
-
-# TSM password for the running username (string value)
-#backup_tsm_password=password
-
-# Enable or Disable compression for backups (boolean value)
-#backup_tsm_compression=true
-
-
-#
-# Options defined in cinder.backup.manager
-#
-
-# Driver to use for backups. (string value)
-# Deprecated group/name - [DEFAULT]/backup_service
-#backup_driver=cinder.backup.drivers.swift
-
-
-#
-# Options defined in cinder.cmd.volume
-#
-
-# Backend override of host value. (string value)
-# Deprecated group/name - [DEFAULT]/host
-#backend_host=<None>
-
-
-#
-# Options defined in cinder.cmd.volume_usage_audit
-#
-
-# If this option is specified then the start time specified is
-# used instead of the start time of the last completed audit
-# period. (string value)
-#start_time=<None>
-
-# If this option is specified then the end time specified is
-# used instead of the end time of the last completed audit
-# period. (string value)
-#end_time=<None>
-
-# Send the volume and snapshot create and delete notifications
-# generated in the specified period. (boolean value)
-#send_actions=false
-
-
-#
-# Options defined in cinder.common.config
-#
-
-# File name for the paste.deploy config for cinder-api (string
-# value)
-#api_paste_config=api-paste.ini
-
-# Top-level directory for maintaining cinder's state (string
-# value)
-# Deprecated group/name - [DEFAULT]/pybasedir
-#state_path=/var/lib/cinder
-
-# IP address of this host (string value)
-#my_ip=10.0.0.1
-
-# Default glance host name or IP (string value)
-#glance_host=$my_ip
-
-# Default glance port (integer value)
-#glance_port=9292
-
-# A list of the glance API servers available to cinder
-# ([hostname|ip]:port) (list value)
-#glance_api_servers=$glance_host:$glance_port
-
-# Version of the glance API to use (integer value)
-#glance_api_version=1
-
-# Number retries when downloading an image from glance
-# (integer value)
-#glance_num_retries=0
-
-# Allow to perform insecure SSL (https) requests to glance
-# (boolean value)
-#glance_api_insecure=false
-
-# Enables or disables negotiation of SSL layer compression. In
-# some cases disabling compression can improve data
-# throughput, such as when high network bandwidth is available
-# and you use compressed image formats like qcow2. (boolean
-# value)
-#glance_api_ssl_compression=false
-
-# Location of ca certificates file to use for glance client
-# requests. (string value)
-#glance_ca_certificates_file=<None>
-
-# http/https timeout value for glance operations. If no value
-# (None) is supplied here, the glanceclient default value is
-# used. (integer value)
-#glance_request_timeout=<None>
-
-# The topic that scheduler nodes listen on (string value)
-#scheduler_topic=cinder-scheduler
-
-# The topic that volume nodes listen on (string value)
-#volume_topic=cinder-volume
-
-# The topic that volume backup nodes listen on (string value)
-#backup_topic=cinder-backup
-
-# DEPRECATED: Deploy v1 of the Cinder API. (boolean value)
-#enable_v1_api=true
-
-# Deploy v2 of the Cinder API. (boolean value)
-#enable_v2_api=true
-
-# Enables or disables rate limit of the API. (boolean value)
-#api_rate_limit=true
-
-# Specify list of extensions to load when using
-# osapi_volume_extension option with
-# cinder.api.contrib.select_extensions (list value)
-#osapi_volume_ext_list=
-
-# osapi volume extension to load (multi valued)
-#osapi_volume_extension=cinder.api.contrib.standard_extensions
-
-# Full class name for the Manager for volume (string value)
-#volume_manager=cinder.volume.manager.VolumeManager
-
-# Full class name for the Manager for volume backup (string
-# value)
-#backup_manager=cinder.backup.manager.BackupManager
-
-# Full class name for the Manager for scheduler (string value)
-#scheduler_manager=cinder.scheduler.manager.SchedulerManager
-
-# Name of this node. This can be an opaque identifier. It is
-# not necessarily a host name, FQDN, or IP address. (string
-# value)
-#host=cinder
-
-# Availability zone of this node (string value)
-#storage_availability_zone=nova
-
-# Default availability zone for new volumes. If not set, the
-# storage_availability_zone option value is used as the
-# default for new volumes. (string value)
-#default_availability_zone=<None>
-
-# Default volume type to use (string value)
-#default_volume_type=<None>
-
-# Time period for which to generate volume usages. The options
-# are hour, day, month, or year. (string value)
-#volume_usage_audit_period=month
-
-# Path to the rootwrap configuration file to use for running
-# commands as root (string value)
-#rootwrap_config=/etc/cinder/rootwrap.conf
-
-# Enable monkey patching (boolean value)
-#monkey_patch=false
-
-# List of modules/decorators to monkey patch (list value)
-#monkey_patch_modules=
-
-# Maximum time since last check-in for a service to be
-# considered up (integer value)
-#service_down_time=60
-
-# The full class name of the volume API class to use (string
-# value)
-#volume_api_class=cinder.volume.api.API
-
-# The full class name of the volume backup API class (string
-# value)
-#backup_api_class=cinder.backup.api.API
-
-# The strategy to use for auth. Supports noauth, keystone, and
-# deprecated. (string value)
-#auth_strategy=noauth
-
-# A list of backend names to use. These backend names should
-# be backed by a unique [CONFIG] group with its options (list
-# value)
-#enabled_backends=<None>
-
-# Whether snapshots count against GigaByte quota (boolean
-# value)
-#no_snapshot_gb_quota=false
-
-# The full class name of the volume transfer API class (string
-# value)
-#transfer_api_class=cinder.transfer.api.API
-
-# The full class name of the volume replication API class
-# (string value)
-#replication_api_class=cinder.replication.api.API
-
-# The full class name of the consistencygroup API class
-# (string value)
-#consistencygroup_api_class=cinder.consistencygroup.api.API
-
-
-#
-# Options defined in cinder.compute
-#
-
-# The full class name of the compute API class to use (string
-# value)
-#compute_api_class=cinder.compute.nova.API
-
-
-#
-# Options defined in cinder.compute.nova
-#
-
-# Match this value when searching for nova in the service
-# catalog. Format is: separated values of the form:
-# <service_type>:<service_name>:<endpoint_type> (string value)
-#nova_catalog_info=compute:nova:publicURL
-
-# Same as nova_catalog_info, but for admin endpoint. (string
-# value)
-#nova_catalog_admin_info=compute:nova:adminURL
-
-# Override service catalog lookup with template for nova
-# endpoint e.g. http://localhost:8774/v2/%(project_id)s
-# (string value)
-#nova_endpoint_template=<None>
-
-# Same as nova_endpoint_template, but for admin endpoint.
-# (string value)
-#nova_endpoint_admin_template=<None>
-
-# Region name of this node (string value)
-#os_region_name=<None>
-
-# Location of ca certificates file to use for nova client
-# requests. (string value)
-#nova_ca_certificates_file=<None>
-
-# Allow to perform insecure SSL requests to nova (boolean
-# value)
-#nova_api_insecure=false
-
-
-#
-# Options defined in cinder.db.api
-#
-
-# The backend to use for db (string value)
-#db_backend=sqlalchemy
-
-# Services to be added to the available pool on create
-# (boolean value)
-#enable_new_services=true
-
-# Template string to be used to generate volume names (string
-# value)
-#volume_name_template=volume-%s
-
-# Template string to be used to generate snapshot names
-# (string value)
-#snapshot_name_template=snapshot-%s
-
-# Template string to be used to generate backup names (string
-# value)
-#backup_name_template=backup-%s
-
-
-#
-# Options defined in cinder.db.base
-#
-
-# Driver to use for database access (string value)
-#db_driver=cinder.db
-
-
-#
-# Options defined in cinder.image.glance
-#
-
-# Default core properties of image (list value)
-#glance_core_properties=checksum,container_format,disk_format,image_name,image_id,min_disk,min_ram,name,size
-
-# A list of url schemes that can be downloaded directly via
-# the direct_url. Currently supported schemes: [file]. (list
-# value)
-#allowed_direct_url_schemes=
-
-
-#
-# Options defined in cinder.image.image_utils
-#
-
-# Directory used for temporary storage during image conversion
-# (string value)
-#image_conversion_dir=$state_path/conversion
-
-
-#
-# Options defined in cinder.openstack.common.eventlet_backdoor
-#
-
-# Enable eventlet backdoor. Acceptable values are 0, <port>,
-# and <start>:<end>, where 0 results in listening on a random
-# tcp port number; <port> results in listening on the
-# specified port number (and not enabling backdoor if that
-# port is in use); and <start>:<end> results in listening on
-# the smallest unused port number within the specified range
-# of port numbers. The chosen port is displayed in the
-# service's log file. (string value)
-#backdoor_port=<None>
-
-
-#
-# Options defined in cinder.openstack.common.log
-#
-
-# Print debugging output (set logging level to DEBUG instead
-# of default WARNING level). (boolean value)
-#debug=false
-
-# Print more verbose output (set logging level to INFO instead
-# of default WARNING level). (boolean value)
-#verbose=false
-
-# Log output to standard error. (boolean value)
-#use_stderr=true
-
-# Format string to use for log messages with context. (string
-# value)
-#logging_context_format_string=%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages without context.
-# (string value)
-#logging_default_format_string=%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Data to append to log format when level is DEBUG. (string
-# value)
-#logging_debug_format_suffix=%(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format.
-# (string value)
-#logging_exception_prefix=%(asctime)s.%(msecs)03d %(process)d TRACE %(name)s %(instance)s
-
-# List of logger=LEVEL pairs. (list value)
-#default_log_levels=amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN
-
-# Enables or disables publication of error events. (boolean
-# value)
-#publish_errors=false
-
-# Enables or disables fatal status of deprecations. (boolean
-# value)
-#fatal_deprecations=false
-
-# The format for an instance that is passed with the log
-# message. (string value)
-#instance_format="[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log
-# message. (string value)
-#instance_uuid_format="[instance: %(uuid)s] "
-
-# The name of a logging configuration file. This file is
-# appended to any existing logging configuration files. For
-# details about logging configuration files, see the Python
-# logging module documentation. (string value)
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append=<None>
-
-# DEPRECATED. A logging.Formatter log message format string
-# which may use any of the available logging.LogRecord
-# attributes. This option is deprecated. Please use
-# logging_context_format_string and
-# logging_default_format_string instead. (string value)
-#log_format=<None>
-
-# Format string for %%(asctime)s in log records. Default:
-# %(default)s . (string value)
-#log_date_format=%Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to output to. If no default is
-# set, logging will go to stdout. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file=<None>
-
-# (Optional) The base directory used for relative --log-file
-# paths. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir=<None>
-
-# Use syslog for logging. Existing syslog format is DEPRECATED
-# during I, and will change in J to honor RFC5424. (boolean
-# value)
-#use_syslog=false
-
-# (Optional) Enables or disables syslog rfc5424 format for
-# logging. If enabled, prefixes the MSG part of the syslog
-# message with APP-NAME (RFC5424). The format without the APP-
-# NAME is deprecated in I, and will be removed in J. (boolean
-# value)
-#use_syslog_rfc_format=false
-
-# Syslog facility to receive log lines. (string value)
-#syslog_log_facility=LOG_USER
-
-
-#
-# Options defined in cinder.openstack.common.periodic_task
-#
-
-# Some periodic tasks can be run in a separate process. Should
-# we run them here? (boolean value)
-#run_external_periodic_tasks=true
-
-
-#
-# Options defined in cinder.openstack.common.policy
-#
-
-# The JSON file that defines policies. (string value)
-#policy_file=policy.json
-
-# Default rule. Enforced when a requested rule is not found.
-# (string value)
-#policy_default_rule=default
-
-# Directories where policy configuration files are stored.
-# They can be relative to any directory in the search path
-# defined by the config_dir option, or absolute paths. The
-# file defined by policy_file must exist for these directories
-# to be searched. (multi valued)
-#policy_dirs=policy.d
-
-
-#
-# Options defined in cinder.scheduler.driver
-#
-
-# The scheduler host manager class to use (string value)
-#scheduler_host_manager=cinder.scheduler.host_manager.HostManager
-
-# Maximum number of attempts to schedule an volume (integer
-# value)
-#scheduler_max_attempts=3
-
-
-#
-# Options defined in cinder.scheduler.host_manager
-#
-
-# Which filter class names to use for filtering hosts when not
-# specified in the request. (list value)
-#scheduler_default_filters=AvailabilityZoneFilter,CapacityFilter,CapabilitiesFilter
-
-# Which weigher class names to use for weighing hosts. (list
-# value)
-#scheduler_default_weighers=CapacityWeigher
-
-
-#
-# Options defined in cinder.scheduler.manager
-#
-
-# Default scheduler driver to use (string value)
-#scheduler_driver=cinder.scheduler.filter_scheduler.FilterScheduler
-
-
-#
-# Options defined in cinder.scheduler.scheduler_options
-#
-
-# Absolute path to scheduler configuration JSON file. (string
-# value)
-#scheduler_json_config_location=
-
-
-#
-# Options defined in cinder.scheduler.simple
-#
-
-# This configure option has been deprecated along with the
-# SimpleScheduler. New scheduler is able to gather capacity
-# information for each host, thus setting the maximum number
-# of volume gigabytes for host is no longer needed. It's safe
-# to remove this configure from cinder.conf. (integer value)
-#max_gigabytes=10000
-
-
-#
-# Options defined in cinder.scheduler.weights.capacity
-#
-
-# Multiplier used for weighing volume capacity. Negative
-# numbers mean to stack vs spread. (floating point value)
-#capacity_weight_multiplier=1.0
-
-# Multiplier used for weighing volume capacity. Negative
-# numbers mean to stack vs spread. (floating point value)
-#allocated_capacity_weight_multiplier=-1.0
-
-
-#
-# Options defined in cinder.scheduler.weights.volume_number
-#
-
-# Multiplier used for weighing volume number. Negative numbers
-# mean to spread vs stack. (floating point value)
-#volume_number_multiplier=-1.0
-
-
-#
-# Options defined in cinder.transfer.api
-#
-
-# The number of characters in the salt. (integer value)
-#volume_transfer_salt_length=8
-
-# The number of characters in the autogenerated auth key.
-# (integer value)
-#volume_transfer_key_length=16
-
-
-#
-# Options defined in cinder.volume.api
-#
-
-# Cache volume availability zones in memory for the provided
-# duration in seconds (integer value)
-#az_cache_duration=3600
-
-# Create volume from snapshot at the host where snapshot
-# resides (boolean value)
-#snapshot_same_host=true
-
-# Ensure that the new volumes are the same AZ as snapshot or
-# source volume (boolean value)
-#cloned_volume_same_az=true
-
-
-#
-# Options defined in cinder.volume.driver
-#
-
-# The maximum number of times to rescan iSER targetto find
-# volume (integer value)
-#num_iser_scan_tries=3
-
-# The maximum number of iSER target IDs per host (integer
-# value)
-#iser_num_targets=100
-
-# Prefix for iSER volumes (string value)
-#iser_target_prefix=iqn.2010-10.org.iser.openstack:
-
-# The IP address that the iSER daemon is listening on (string
-# value)
-#iser_ip_address=$my_ip
-
-# The port that the iSER daemon is listening on (integer
-# value)
-#iser_port=3260
-
-# The name of the iSER target user-land tool to use (string
-# value)
-#iser_helper=tgtadm
-
-# Number of times to attempt to run flakey shell commands
-# (integer value)
-#num_shell_tries=3
-
-# The percentage of backend capacity is reserved (integer
-# value)
-#reserved_percentage=0
-
-# The maximum number of iSCSI target IDs per host (integer
-# value)
-#iscsi_num_targets=100
-
-# Prefix for iSCSI volumes (string value)
-#iscsi_target_prefix=iqn.2010-10.org.openstack:
-
-# The IP address that the iSCSI daemon is listening on (string
-# value)
-#iscsi_ip_address=$my_ip
-
-# The port that the iSCSI daemon is listening on (integer
-# value)
-#iscsi_port=3260
-
-# The maximum number of times to rescan targets to find volume
-# (integer value)
-# Deprecated group/name - [DEFAULT]/num_iscsi_scan_tries
-#num_volume_device_scan_tries=3
-
-# The backend name for a given driver implementation (string
-# value)
-#volume_backend_name=<None>
-
-# Do we attach/detach volumes in cinder using multipath for
-# volume to image and image to volume transfers? (boolean
-# value)
-#use_multipath_for_image_xfer=false
-
-# Method used to wipe old volumes (valid options are: none,
-# zero, shred) (string value)
-#volume_clear=zero
-
-# Size in MiB to wipe at start of old volumes. 0 => all
-# (integer value)
-#volume_clear_size=0
-
-# The flag to pass to ionice to alter the i/o priority of the
-# process used to zero a volume after deletion, for example
-# "-c3" for idle only priority. (string value)
-#volume_clear_ionice=<None>
-
-# iSCSI target user-land tool to use. tgtadm is default, use
-# lioadm for LIO iSCSI support, iseradm for the ISER protocol,
-# or fake for testing. (string value)
-#iscsi_helper=tgtadm
-
-# Volume configuration file storage directory (string value)
-#volumes_dir=$state_path/volumes
-
-# IET configuration file (string value)
-#iet_conf=/etc/iet/ietd.conf
-
-# This option is deprecated and unused. It will be removed in
-# the next release. (string value)
-#lio_initiator_iqns=
-
-# Sets the behavior of the iSCSI target to either perform
-# blockio or fileio optionally, auto can be set and Cinder
-# will autodetect type of backing device (string value)
-#iscsi_iotype=fileio
-
-# The default block size used when copying/clearing volumes
-# (string value)
-#volume_dd_blocksize=1M
-
-# The blkio cgroup name to be used to limit bandwidth of
-# volume copy (string value)
-#volume_copy_blkio_cgroup_name=cinder-volume-copy
-
-# The upper limit of bandwidth of volume copy. 0 => unlimited
-# (integer value)
-#volume_copy_bps_limit=0
-
-# Sets the behavior of the iSCSI target to either perform
-# write-back(on) or write-through(off). This parameter is
-# valid if iscsi_helper is set to tgtadm or iseradm. (string
-# value)
-#iscsi_write_cache=on
-
-# The path to the client certificate key for verification, if
-# the driver supports it. (string value)
-#driver_client_cert_key=<None>
-
-# The path to the client certificate for verification, if the
-# driver supports it. (string value)
-#driver_client_cert=<None>
-
-# Tell driver to use SSL for connection to backend storage if
-# the driver supports it. (boolean value)
-#driver_use_ssl=false
-
-
-#
-# Options defined in cinder.volume.drivers.block_device
-#
-
-# List of all available devices (list value)
-#available_devices=
-
-
-#
-# Options defined in cinder.volume.drivers.coraid
-#
-
-# IP address of Coraid ESM (string value)
-#coraid_esm_address=
-
-# User name to connect to Coraid ESM (string value)
-#coraid_user=admin
-
-# Name of group on Coraid ESM to which coraid_user belongs
-# (must have admin privilege) (string value)
-#coraid_group=admin
-
-# Password to connect to Coraid ESM (string value)
-#coraid_password=password
-
-# Volume Type key name to store ESM Repository Name (string
-# value)
-#coraid_repository_key=coraid_repository
-
-# ESM Repository Name to use if not specified in Volume Type
-# keys (string value)
-#coraid_default_repository=<None>
-
-
-#
-# Options defined in cinder.volume.drivers.datera
-#
-
-# Datera API token. (string value)
-#datera_api_token=<None>
-
-# Datera API port. (string value)
-#datera_api_port=7717
-
-# Datera API version. (string value)
-#datera_api_version=1
-
-# Number of replicas to create of an inode. (string value)
-#datera_num_replicas=3
-
-
-#
-# Options defined in cinder.volume.drivers.emc.emc_vmax_common
-#
-
-# use this file for cinder emc plugin config data (string
-# value)
-#cinder_emc_config_file=/etc/cinder/cinder_emc_config.xml
-
-
-#
-# Options defined in cinder.volume.drivers.emc.emc_vnx_cli
-#
-
-# VNX authentication scope type. (string value)
-#storage_vnx_authentication_type=global
-
-# Directory path that contains the VNX security file. Make
-# sure the security file is generated first. (string value)
-#storage_vnx_security_file_dir=<None>
-
-# Naviseccli Path. (string value)
-#naviseccli_path=
-
-# Storage pool name. (string value)
-#storage_vnx_pool_name=<None>
-
-# VNX secondary SP IP Address. (string value)
-#san_secondary_ip=<None>
-
-# Default timeout for CLI operations in minutes. For example,
-# LUN migration is a typical long running operation, which
-# depends on the LUN size and the load of the array. An upper
-# bound in the specific deployment can be set to avoid
-# unnecessary long wait. By default, it is 365 days long.
-# (integer value)
-#default_timeout=525600
-
-# Default max number of LUNs in a storage group. By default,
-# the value is 255. (integer value)
-#max_luns_per_storage_group=255
-
-# To destroy storage group when the last LUN is removed from
-# it. By default, the value is False. (boolean value)
-#destroy_empty_storage_group=false
-
-# Mapping between hostname and its iSCSI initiator IP
-# addresses. (string value)
-#iscsi_initiators=
-
-# Automatically register initiators. By default, the value is
-# False. (boolean value)
-#initiator_auto_registration=false
-
-
-#
-# Options defined in cinder.volume.drivers.eqlx
-#
-
-# Group name to use for creating volumes (string value)
-#eqlx_group_name=group-0
-
-# Timeout for the Group Manager cli command execution (integer
-# value)
-#eqlx_cli_timeout=30
-
-# Maximum retry count for reconnection (integer value)
-#eqlx_cli_max_retries=5
-
-# Use CHAP authentication for targets? (boolean value)
-#eqlx_use_chap=false
-
-# Existing CHAP account name (string value)
-#eqlx_chap_login=admin
-
-# Password for specified CHAP account name (string value)
-#eqlx_chap_password=password
-
-# Pool in which volumes will be created (string value)
-#eqlx_pool=default
-
-
-#
-# Options defined in cinder.volume.drivers.fujitsu_eternus_dx_common
-#
-
-# The configuration file for the Cinder SMI-S driver (string
-# value)
-#cinder_smis_config_file=/etc/cinder/cinder_fujitsu_eternus_dx.xml
-
-
-#
-# Options defined in cinder.volume.drivers.fusionio.ioControl
-#
-
-# amount of time wait for iSCSI target to come online (integer
-# value)
-#fusionio_iocontrol_targetdelay=5
-
-# number of retries for GET operations (integer value)
-#fusionio_iocontrol_retry=3
-
-# verify the array certificate on each transaction (boolean
-# value)
-#fusionio_iocontrol_verify_cert=true
-
-
-#
-# Options defined in cinder.volume.drivers.glusterfs
-#
-
-# File with the list of available gluster shares (string
-# value)
-#glusterfs_shares_config=/etc/cinder/glusterfs_shares
-
-# Create volumes as sparsed files which take no space.If set
-# to False volume is created as regular file.In such case
-# volume creation takes a lot of time. (boolean value)
-#glusterfs_sparsed_volumes=true
-
-# Create volumes as QCOW2 files rather than raw files.
-# (boolean value)
-#glusterfs_qcow2_volumes=false
-
-# Base dir containing mount points for gluster shares. (string
-# value)
-#glusterfs_mount_point_base=$state_path/mnt
-
-
-#
-# Options defined in cinder.volume.drivers.hds.hds
-#
-
-# The configuration file for the Cinder HDS driver for HUS
-# (string value)
-#hds_cinder_config_file=/opt/hds/hus/cinder_hus_conf.xml
-
-
-#
-# Options defined in cinder.volume.drivers.hds.iscsi
-#
-
-# Configuration file for HDS iSCSI cinder plugin (string
-# value)
-#hds_hnas_iscsi_config_file=/opt/hds/hnas/cinder_iscsi_conf.xml
-
-
-#
-# Options defined in cinder.volume.drivers.hds.nfs
-#
-
-# Configuration file for HDS NFS cinder plugin (string value)
-#hds_hnas_nfs_config_file=/opt/hds/hnas/cinder_nfs_conf.xml
-
-
-#
-# Options defined in cinder.volume.drivers.hitachi.hbsd_common
-#
-
-# Serial number of storage system (string value)
-#hitachi_serial_number=<None>
-
-# Name of an array unit (string value)
-#hitachi_unit_name=<None>
-
-# Pool ID of storage system (integer value)
-#hitachi_pool_id=<None>
-
-# Thin pool ID of storage system (integer value)
-#hitachi_thin_pool_id=<None>
-
-# Range of logical device of storage system (string value)
-#hitachi_ldev_range=<None>
-
-# Default copy method of storage system (string value)
-#hitachi_default_copy_method=FULL
-
-# Copy speed of storage system (integer value)
-#hitachi_copy_speed=3
-
-# Interval to check copy (integer value)
-#hitachi_copy_check_interval=3
-
-# Interval to check copy asynchronously (integer value)
-#hitachi_async_copy_check_interval=10
-
-# Control port names for HostGroup or iSCSI Target (string
-# value)
-#hitachi_target_ports=<None>
-
-# Range of group number (string value)
-#hitachi_group_range=<None>
-
-# Request for creating HostGroup or iSCSI Target (boolean
-# value)
-#hitachi_group_request=false
-
-
-#
-# Options defined in cinder.volume.drivers.hitachi.hbsd_fc
-#
-
-# Request for FC Zone creating HostGroup (boolean value)
-#hitachi_zoning_request=false
-
-
-#
-# Options defined in cinder.volume.drivers.hitachi.hbsd_horcm
-#
-
-# Instance numbers for HORCM (string value)
-#hitachi_horcm_numbers=200,201
-
-# Username of storage system for HORCM (string value)
-#hitachi_horcm_user=<None>
-
-# Password of storage system for HORCM (string value)
-#hitachi_horcm_password=<None>
-
-# Add to HORCM configuration (boolean value)
-#hitachi_horcm_add_conf=true
-
-
-#
-# Options defined in cinder.volume.drivers.hitachi.hbsd_iscsi
-#
-
-# Add CHAP user (boolean value)
-#hitachi_add_chap_user=false
-
-# iSCSI authentication method (string value)
-#hitachi_auth_method=<None>
-
-# iSCSI authentication username (string value)
-#hitachi_auth_user=HBSD-CHAP-user
-
-# iSCSI authentication password (string value)
-#hitachi_auth_password=HBSD-CHAP-password
-
-
-#
-# Options defined in cinder.volume.drivers.huawei
-#
-
-# The configuration file for the Cinder Huawei driver (string
-# value)
-#cinder_huawei_conf_file=/etc/cinder/cinder_huawei_conf.xml
-
-
-#
-# Options defined in cinder.volume.drivers.ibm.flashsystem
-#
-
-# Connection protocol should be FC. (string value)
-#flashsystem_connection_protocol=FC
-
-# Connect with multipath (FC only). (boolean value)
-#flashsystem_multipath_enabled=false
-
-# Allows vdisk to multi host mapping. (boolean value)
-#flashsystem_multihostmap_enabled=true
-
-
-#
-# Options defined in cinder.volume.drivers.ibm.gpfs
-#
-
-# Specifies the path of the GPFS directory where Block Storage
-# volume and snapshot files are stored. (string value)
-#gpfs_mount_point_base=<None>
-
-# Specifies the path of the Image service repository in GPFS.
-# Leave undefined if not storing images in GPFS. (string
-# value)
-#gpfs_images_dir=<None>
-
-# Specifies the type of image copy to be used. Set this when
-# the Image service repository also uses GPFS so that image
-# files can be transferred efficiently from the Image service
-# to the Block Storage service. There are two valid values:
-# "copy" specifies that a full copy of the image is made;
-# "copy_on_write" specifies that copy-on-write optimization
-# strategy is used and unmodified blocks of the image file are
-# shared efficiently. (string value)
-#gpfs_images_share_mode=<None>
-
-# Specifies an upper limit on the number of indirections
-# required to reach a specific block due to snapshots or
-# clones. A lengthy chain of copy-on-write snapshots or
-# clones can have a negative impact on performance, but
-# improves space utilization. 0 indicates unlimited clone
-# depth. (integer value)
-#gpfs_max_clone_depth=0
-
-# Specifies that volumes are created as sparse files which
-# initially consume no space. If set to False, the volume is
-# created as a fully allocated file, in which case, creation
-# may take a significantly longer time. (boolean value)
-#gpfs_sparse_volumes=true
-
-# Specifies the storage pool that volumes are assigned to. By
-# default, the system storage pool is used. (string value)
-#gpfs_storage_pool=system
-
-
-#
-# Options defined in cinder.volume.drivers.ibm.ibmnas
-#
-
-# IP address or Hostname of NAS system. (string value)
-#nas_ip=
-
-# User name to connect to NAS system. (string value)
-#nas_login=admin
-
-# Password to connect to NAS system. (string value)
-#nas_password=
-
-# SSH port to use to connect to NAS system. (integer value)
-#nas_ssh_port=22
-
-# Filename of private key to use for SSH authentication.
-# (string value)
-#nas_private_key=
-
-# Allow network-attached storage systems to operate in a
-# secure environment where root level access is not permitted.
-# If set to False, access is as the root user and insecure. If
-# set to True, access is not as root. If set to auto, a check
-# is done to determine if this is a new installation: True is
-# used if so, otherwise False. Default is auto. (string value)
-#nas_secure_file_operations=auto
-
-# Set more secure file permissions on network-attached storage
-# volume files to restrict broad other/world access. If set to
-# False, volumes are created with open permissions. If set to
-# True, volumes are created with permissions for the cinder
-# user and group (660). If set to auto, a check is done to
-# determine if this is a new installation: True is used if so,
-# otherwise False. Default is auto. (string value)
-#nas_secure_file_permissions=auto
-
-# IBMNAS platform type to be used as backend storage; valid
-# values are - v7ku : for using IBM Storwize V7000 Unified,
-# sonas : for using IBM Scale Out NAS, gpfs-nas : for using
-# NFS based IBM GPFS deployments. (string value)
-#ibmnas_platform_type=v7ku
-
-
-#
-# Options defined in cinder.volume.drivers.ibm.storwize_svc
-#
-
-# Storage system storage pool for volumes (string value)
-#storwize_svc_volpool_name=volpool
-
-# Storage system space-efficiency parameter for volumes
-# (percentage) (integer value)
-#storwize_svc_vol_rsize=2
-
-# Storage system threshold for volume capacity warnings
-# (percentage) (integer value)
-#storwize_svc_vol_warning=0
-
-# Storage system autoexpand parameter for volumes (True/False)
-# (boolean value)
-#storwize_svc_vol_autoexpand=true
-
-# Storage system grain size parameter for volumes
-# (32/64/128/256) (integer value)
-#storwize_svc_vol_grainsize=256
-
-# Storage system compression option for volumes (boolean
-# value)
-#storwize_svc_vol_compression=false
-
-# Enable Easy Tier for volumes (boolean value)
-#storwize_svc_vol_easytier=true
-
-# The I/O group in which to allocate volumes (integer value)
-#storwize_svc_vol_iogrp=0
-
-# Maximum number of seconds to wait for FlashCopy to be
-# prepared. Maximum value is 600 seconds (10 minutes) (integer
-# value)
-#storwize_svc_flashcopy_timeout=120
-
-# Connection protocol (iSCSI/FC) (string value)
-#storwize_svc_connection_protocol=iSCSI
-
-# Configure CHAP authentication for iSCSI connections
-# (Default: Enabled) (boolean value)
-#storwize_svc_iscsi_chap_enabled=true
-
-# Connect with multipath (FC only; iSCSI multipath is
-# controlled by Nova) (boolean value)
-#storwize_svc_multipath_enabled=false
-
-# Allows vdisk to multi host mapping (boolean value)
-#storwize_svc_multihostmap_enabled=true
-
-# Indicate whether svc driver is compatible for NPIV setup. If
-# it is compatible, it will allow no wwpns being returned on
-# get_conn_fc_wwpns during initialize_connection (boolean
-# value)
-#storwize_svc_npiv_compatibility_mode=false
-
-# Allow tenants to specify QOS on create (boolean value)
-#storwize_svc_allow_tenant_qos=false
-
-# If operating in stretched cluster mode, specify the name of
-# the pool in which mirrored copies are stored.Example:
-# "pool2" (string value)
-#storwize_svc_stretched_cluster_partner=<None>
-
-
-#
-# Options defined in cinder.volume.drivers.ibm.xiv_ds8k
-#
-
-# Proxy driver that connects to the IBM Storage Array (string
-# value)
-#xiv_ds8k_proxy=xiv_ds8k_openstack.nova_proxy.XIVDS8KNovaProxy
-
-# Connection type to the IBM Storage Array
-# (fibre_channel|iscsi) (string value)
-#xiv_ds8k_connection_type=iscsi
-
-# CHAP authentication mode, effective only for iscsi
-# (disabled|enabled) (string value)
-#xiv_chap=disabled
-
-
-#
-# Options defined in cinder.volume.drivers.lvm
-#
-
-# Name for the VG that will contain exported volumes (string
-# value)
-#volume_group=cinder-volumes
-
-# If >0, create LVs with multiple mirrors. Note that this
-# requires lvm_mirrors + 2 PVs with available space (integer
-# value)
-#lvm_mirrors=0
-
-# Type of LVM volumes to deploy; (default or thin) (string
-# value)
-#lvm_type=default
-
-
-#
-# Options defined in cinder.volume.drivers.netapp.options
-#
-
-# The vFiler unit on which provisioning of block storage
-# volumes will be done. This option is only used by the driver
-# when connecting to an instance with a storage family of Data
-# ONTAP operating in 7-Mode. Only use this option when
-# utilizing the MultiStore feature on the NetApp storage
-# system. (string value)
-#netapp_vfiler=<None>
-
-# Administrative user account name used to access the storage
-# system or proxy server. (string value)
-#netapp_login=<None>
-
-# Password for the administrative user account specified in
-# the netapp_login option. (string value)
-#netapp_password=<None>
-
-# This option specifies the virtual storage server (Vserver)
-# name on the storage cluster on which provisioning of block
-# storage volumes should occur. If using the NFS storage
-# protocol, this parameter is mandatory for storage service
-# catalog support (utilized by Cinder volume type extra_specs
-# support). If this option is specified, the exports belonging
-# to the Vserver will only be used for provisioning in the
-# future. Block storage volumes on exports not belonging to
-# the Vserver specified by this option will continue to
-# function normally. (string value)
-#netapp_vserver=<None>
-
-# The hostname (or IP address) for the storage system or proxy
-# server. (string value)
-#netapp_server_hostname=<None>
-
-# The TCP port to use for communication with the storage
-# system or proxy server. If not specified, Data ONTAP drivers
-# will use 80 for HTTP and 443 for HTTPS; E-Series will use
-# 8080 for HTTP and 8443 for HTTPS. (integer value)
-#netapp_server_port=<None>
-
-# This option is used to specify the path to the E-Series
-# proxy application on a proxy server. The value is combined
-# with the value of the netapp_transport_type,
-# netapp_server_hostname, and netapp_server_port options to
-# create the URL used by the driver to connect to the proxy
-# application. (string value)
-#netapp_webservice_path=/devmgr/v2
-
-# This option is only utilized when the storage family is
-# configured to eseries. This option is used to restrict
-# provisioning to the specified controllers. Specify the value
-# of this option to be a comma separated list of controller
-# hostnames or IP addresses to be used for provisioning.
-# (string value)
-#netapp_controller_ips=<None>
-
-# Password for the NetApp E-Series storage array. (string
-# value)
-#netapp_sa_password=<None>
-
-# This option is used to restrict provisioning to the
-# specified storage pools. Only dynamic disk pools are
-# currently supported. Specify the value of this option to be
-# a comma separated list of disk pool names to be used for
-# provisioning. (string value)
-#netapp_storage_pools=<None>
-
-# This option is used to define how the controllers in the
-# E-Series storage array will work with the particular
-# operating system on the hosts that are connected to it.
-# (string value)
-#netapp_eseries_host_type=linux_dm_mp
-
-# If the percentage of available space for an NFS share has
-# dropped below the value specified by this option, the NFS
-# image cache will be cleaned. (integer value)
-#thres_avl_size_perc_start=20
-
-# When the percentage of available space on an NFS share has
-# reached the percentage specified by this option, the driver
-# will stop clearing files from the NFS image cache that have
-# not been accessed in the last M minutes, where M is the
-# value of the expiry_thres_minutes configuration option.
-# (integer value)
-#thres_avl_size_perc_stop=60
-
-# This option specifies the threshold for last access time for
-# images in the NFS image cache. When a cache cleaning cycle
-# begins, images in the cache that have not been accessed in
-# the last M minutes, where M is the value of this parameter,
-# will be deleted from the cache to create free space on the
-# NFS share. (integer value)
-#expiry_thres_minutes=720
-
-# This option specifies the path of the NetApp copy offload
-# tool binary. Ensure that the binary has execute permissions
-# set which allow the effective user of the cinder-volume
-# process to execute the file. (string value)
-#netapp_copyoffload_tool_path=<None>
-
-# The quantity to be multiplied by the requested volume size
-# to ensure enough space is available on the virtual storage
-# server (Vserver) to fulfill the volume creation request.
-# (floating point value)
-#netapp_size_multiplier=1.2
-
-# This option is only utilized when the storage protocol is
-# configured to use iSCSI. This option is used to restrict
-# provisioning to the specified controller volumes. Specify
-# the value of this option to be a comma separated list of
-# NetApp controller volume names to be used for provisioning.
-# (string value)
-#netapp_volume_list=<None>
-
-# The storage family type used on the storage system; valid
-# values are ontap_7mode for using Data ONTAP operating in
-# 7-Mode, ontap_cluster for using clustered Data ONTAP, or
-# eseries for using E-Series. (string value)
-#netapp_storage_family=ontap_cluster
-
-# The storage protocol to be used on the data path with the
-# storage system; valid values are iscsi or nfs. (string
-# value)
-#netapp_storage_protocol=<None>
-
-# The transport protocol used when communicating with the
-# storage system or proxy server. Valid values are http or
-# https. (string value)
-#netapp_transport_type=http
-
-
-#
-# Options defined in cinder.volume.drivers.nexenta.options
-#
-
-# IP address of Nexenta SA (string value)
-#nexenta_host=
-
-# HTTP port to connect to Nexenta REST API server (integer
-# value)
-#nexenta_rest_port=2000
-
-# Use http or https for REST connection (default auto) (string
-# value)
-#nexenta_rest_protocol=auto
-
-# User name to connect to Nexenta SA (string value)
-#nexenta_user=admin
-
-# Password to connect to Nexenta SA (string value)
-#nexenta_password=nexenta
-
-# Nexenta target portal port (integer value)
-#nexenta_iscsi_target_portal_port=3260
-
-# SA Pool that holds all volumes (string value)
-#nexenta_volume=cinder
-
-# IQN prefix for iSCSI targets (string value)
-#nexenta_target_prefix=iqn.1986-03.com.sun:02:cinder-
-
-# Prefix for iSCSI target groups on SA (string value)
-#nexenta_target_group_prefix=cinder/
-
-# File with the list of available nfs shares (string value)
-#nexenta_shares_config=/etc/cinder/nfs_shares
-
-# Base directory that contains NFS share mount points (string
-# value)
-#nexenta_mount_point_base=$state_path/mnt
-
-# Enables or disables the creation of volumes as sparsed files
-# that take no space. If disabled (False), volume is created
-# as a regular file, which takes a long time. (boolean value)
-#nexenta_sparsed_volumes=true
-
-# Default compression value for new ZFS folders. (string
-# value)
-#nexenta_volume_compression=on
-
-# If set True cache NexentaStor appliance volroot option
-# value. (boolean value)
-#nexenta_nms_cache_volroot=true
-
-# Enable stream compression, level 1..9. 1 - gives best speed;
-# 9 - gives best compression. (integer value)
-#nexenta_rrmgr_compression=0
-
-# TCP Buffer size in KiloBytes. (integer value)
-#nexenta_rrmgr_tcp_buf_size=4096
-
-# Number of TCP connections. (integer value)
-#nexenta_rrmgr_connections=2
-
-# Block size for volumes (default=blank means 8KB) (string
-# value)
-#nexenta_blocksize=
-
-# Enables or disables the creation of sparse volumes (boolean
-# value)
-#nexenta_sparse=false
-
-
-#
-# Options defined in cinder.volume.drivers.nfs
-#
-
-# File with the list of available nfs shares (string value)
-#nfs_shares_config=/etc/cinder/nfs_shares
-
-# Create volumes as sparsed files which take no space.If set
-# to False volume is created as regular file.In such case
-# volume creation takes a lot of time. (boolean value)
-#nfs_sparsed_volumes=true
-
-# Percent of ACTUAL usage of the underlying volume before no
-# new volumes can be allocated to the volume destination.
-# (floating point value)
-#nfs_used_ratio=0.95
-
-# This will compare the allocated to available space on the
-# volume destination. If the ratio exceeds this number, the
-# destination will no longer be valid. (floating point value)
-#nfs_oversub_ratio=1.0
-
-# Base dir containing mount points for nfs shares. (string
-# value)
-#nfs_mount_point_base=$state_path/mnt
-
-# Mount options passed to the nfs client. See section of the
-# nfs man page for details. (string value)
-#nfs_mount_options=<None>
-
-# The number of attempts to mount nfs shares before raising an
-# error. At least one attempt will be made to mount an nfs
-# share, regardless of the value specified. (integer value)
-#nfs_mount_attempts=3
-
-
-#
-# Options defined in cinder.volume.drivers.nimble
-#
-
-# Nimble Controller pool name (string value)
-#nimble_pool_name=default
-
-# Nimble Subnet Label (string value)
-#nimble_subnet_label=*
-
-
-#
-# Options defined in cinder.volume.drivers.prophetstor.options
-#
-
-# DPL pool uuid in which DPL volumes are stored. (string
-# value)
-#dpl_pool=
-
-# DPL port number. (integer value)
-#dpl_port=8357
-
-
-#
-# Options defined in cinder.volume.drivers.pure
-#
-
-# REST API authorization token. (string value)
-#pure_api_token=<None>
-
-
-#
-# Options defined in cinder.volume.drivers.rbd
-#
-
-# The RADOS pool where rbd volumes are stored (string value)
-#rbd_pool=rbd
-
-# The RADOS client name for accessing rbd volumes - only set
-# when using cephx authentication (string value)
-#rbd_user=<None>
-
-# Path to the ceph configuration file (string value)
-#rbd_ceph_conf=
-
-# Flatten volumes created from snapshots to remove dependency
-# from volume to snapshot (boolean value)
-#rbd_flatten_volume_from_snapshot=false
-
-# The libvirt uuid of the secret for the rbd_user volumes
-# (string value)
-#rbd_secret_uuid=<None>
-
-# Directory where temporary image files are stored when the
-# volume driver does not write them directly to the volume.
-# (string value)
-#volume_tmp_dir=<None>
-
-# Maximum number of nested volume clones that are taken before
-# a flatten occurs. Set to 0 to disable cloning. (integer
-# value)
-#rbd_max_clone_depth=5
-
-# Volumes will be chunked into objects of this size (in
-# megabytes). (integer value)
-#rbd_store_chunk_size=4
-
-# Timeout value (in seconds) used when connecting to ceph
-# cluster. If value < 0, no timeout is set and default
-# librados value is used. (integer value)
-#rados_connect_timeout=-1
-
-
-#
-# Options defined in cinder.volume.drivers.remotefs
-#
-
-# IP address or Hostname of NAS system. (string value)
-#nas_ip=
-
-# User name to connect to NAS system. (string value)
-#nas_login=admin
-
-# Password to connect to NAS system. (string value)
-#nas_password=
-
-# SSH port to use to connect to NAS system. (integer value)
-#nas_ssh_port=22
-
-# Filename of private key to use for SSH authentication.
-# (string value)
-#nas_private_key=
-
-# Allow network-attached storage systems to operate in a
-# secure environment where root level access is not permitted.
-# If set to False, access is as the root user and insecure. If
-# set to True, access is not as root. If set to auto, a check
-# is done to determine if this is a new installation: True is
-# used if so, otherwise False. Default is auto. (string value)
-#nas_secure_file_operations=auto
-
-# Set more secure file permissions on network-attached storage
-# volume files to restrict broad other/world access. If set to
-# False, volumes are created with open permissions. If set to
-# True, volumes are created with permissions for the cinder
-# user and group (660). If set to auto, a check is done to
-# determine if this is a new installation: True is used if so,
-# otherwise False. Default is auto. (string value)
-#nas_secure_file_permissions=auto
-
-
-#
-# Options defined in cinder.volume.drivers.san.hp.hp_3par_common
-#
-
-# 3PAR WSAPI Server Url like https://<3par ip>:8080/api/v1
-# (string value)
-#hp3par_api_url=
-
-# 3PAR Super user username (string value)
-#hp3par_username=
-
-# 3PAR Super user password (string value)
-#hp3par_password=
-
-# List of the CPG(s) to use for volume creation (list value)
-#hp3par_cpg=OpenStack
-
-# The CPG to use for Snapshots for volumes. If empty the
-# userCPG will be used. (string value)
-#hp3par_cpg_snap=
-
-# The time in hours to retain a snapshot. You can't delete it
-# before this expires. (string value)
-#hp3par_snapshot_retention=
-
-# The time in hours when a snapshot expires and is deleted.
-# This must be larger than expiration (string value)
-#hp3par_snapshot_expiration=
-
-# Enable HTTP debugging to 3PAR (boolean value)
-#hp3par_debug=false
-
-# List of target iSCSI addresses to use. (list value)
-#hp3par_iscsi_ips=
-
-# Enable CHAP authentication for iSCSI connections. (boolean
-# value)
-#hp3par_iscsi_chap_enabled=false
-
-
-#
-# Options defined in cinder.volume.drivers.san.hp.hp_lefthand_rest_proxy
-#
-
-# HP LeftHand WSAPI Server Url like https://<LeftHand
-# ip>:8081/lhos (string value)
-#hplefthand_api_url=<None>
-
-# HP LeftHand Super user username (string value)
-#hplefthand_username=<None>
-
-# HP LeftHand Super user password (string value)
-#hplefthand_password=<None>
-
-# HP LeftHand cluster name (string value)
-#hplefthand_clustername=<None>
-
-# Configure CHAP authentication for iSCSI connections
-# (Default: Disabled) (boolean value)
-#hplefthand_iscsi_chap_enabled=false
-
-# Enable HTTP debugging to LeftHand (boolean value)
-#hplefthand_debug=false
-
-
-#
-# Options defined in cinder.volume.drivers.san.hp.hp_msa_common
-#
-
-# The VDisk to use for volume creation. (string value)
-#msa_vdisk=OpenStack
-
-
-#
-# Options defined in cinder.volume.drivers.san.san
-#
-
-# Use thin provisioning for SAN volumes? (boolean value)
-#san_thin_provision=true
-
-# IP address of SAN controller (string value)
-#san_ip=
-
-# Username for SAN controller (string value)
-#san_login=admin
-
-# Password for SAN controller (string value)
-#san_password=
-
-# Filename of private key to use for SSH authentication
-# (string value)
-#san_private_key=
-
-# Cluster name to use for creating volumes (string value)
-#san_clustername=
-
-# SSH port to use with SAN (integer value)
-#san_ssh_port=22
-
-# Execute commands locally instead of over SSH; use if the
-# volume service is running on the SAN device (boolean value)
-#san_is_local=false
-
-# SSH connection timeout in seconds (integer value)
-#ssh_conn_timeout=30
-
-# Minimum ssh connections in the pool (integer value)
-#ssh_min_pool_conn=1
-
-# Maximum ssh connections in the pool (integer value)
-#ssh_max_pool_conn=5
-
-
-#
-# Options defined in cinder.volume.drivers.san.solaris
-#
-
-# The ZFS path under which to create zvols for volumes.
-# (string value)
-#san_zfs_volume_base=rpool/
-
-
-#
-# Options defined in cinder.volume.drivers.scality
-#
-
-# Path or URL to Scality SOFS configuration file (string
-# value)
-#scality_sofs_config=<None>
-
-# Base dir where Scality SOFS shall be mounted (string value)
-#scality_sofs_mount_point=$state_path/scality
-
-# Path from Scality SOFS root to volume dir (string value)
-#scality_sofs_volume_dir=cinder/volumes
-
-
-#
-# Options defined in cinder.volume.drivers.smbfs
-#
-
-# File with the list of available smbfs shares. (string value)
-#smbfs_shares_config=/etc/cinder/smbfs_shares
-
-# Default format that will be used when creating volumes if no
-# volume format is specified. Can be set to: raw, qcow2, vhd
-# or vhdx. (string value)
-#smbfs_default_volume_format=qcow2
-
-# Create volumes as sparsed files which take no space rather
-# than regular files when using raw format, in which case
-# volume creation takes lot of time. (boolean value)
-#smbfs_sparsed_volumes=true
-
-# Percent of ACTUAL usage of the underlying volume before no
-# new volumes can be allocated to the volume destination.
-# (floating point value)
-#smbfs_used_ratio=0.95
-
-# This will compare the allocated to available space on the
-# volume destination. If the ratio exceeds this number, the
-# destination will no longer be valid. (floating point value)
-#smbfs_oversub_ratio=1.0
-
-# Base dir containing mount points for smbfs shares. (string
-# value)
-#smbfs_mount_point_base=$state_path/mnt
-
-# Mount options passed to the smbfs client. See mount.cifs man
-# page for details. (string value)
-#smbfs_mount_options=noperm,file_mode=0775,dir_mode=0775
-
-
-#
-# Options defined in cinder.volume.drivers.solidfire
-#
-
-# Set 512 byte emulation on volume creation; (boolean value)
-#sf_emulate_512=true
-
-# Allow tenants to specify QOS on create (boolean value)
-#sf_allow_tenant_qos=false
-
-# Create SolidFire accounts with this prefix. Any string can
-# be used here, but the string "hostname" is special and will
-# create a prefix using the cinder node hostsname (previous
-# default behavior). The default is NO prefix. (string value)
-#sf_account_prefix=<None>
-
-# SolidFire API port. Useful if the device api is behind a
-# proxy on a different port. (integer value)
-#sf_api_port=443
-
-
-#
-# Options defined in cinder.volume.drivers.vmware.vmdk
-#
-
-# IP address for connecting to VMware ESX/VC server. (string
-# value)
-#vmware_host_ip=<None>
-
-# Username for authenticating with VMware ESX/VC server.
-# (string value)
-#vmware_host_username=<None>
-
-# Password for authenticating with VMware ESX/VC server.
-# (string value)
-#vmware_host_password=<None>
-
-# Optional VIM service WSDL Location e.g
-# http://<server>/vimService.wsdl. Optional over-ride to
-# default location for bug work-arounds. (string value)
-#vmware_wsdl_location=<None>
-
-# Number of times VMware ESX/VC server API must be retried
-# upon connection related issues. (integer value)
-#vmware_api_retry_count=10
-
-# The interval (in seconds) for polling remote tasks invoked
-# on VMware ESX/VC server. (floating point value)
-#vmware_task_poll_interval=0.5
-
-# Name for the folder in the VC datacenter that will contain
-# cinder volumes. (string value)
-#vmware_volume_folder=cinder-volumes
-
-# Timeout in seconds for VMDK volume transfer between Cinder
-# and Glance. (integer value)
-#vmware_image_transfer_timeout_secs=7200
-
-# Max number of objects to be retrieved per batch. Query
-# results will be obtained in batches from the server and not
-# in one shot. Server may still limit the count to something
-# less than the configured value. (integer value)
-#vmware_max_objects_retrieval=100
-
-# Optional string specifying the VMware VC server version. The
-# driver attempts to retrieve the version from VMware VC
-# server. Set this configuration only if you want to override
-# the VC server version. (string value)
-#vmware_host_version=<None>
-
-# Directory where virtual disks are stored during volume
-# backup and restore. (string value)
-#vmware_tmp_dir=/tmp
-
-
-#
-# Options defined in cinder.volume.drivers.windows.windows
-#
-
-# Path to store VHD backed volumes (string value)
-#windows_iscsi_lun_path=C:\iSCSIVirtualDisks
-
-
-#
-# Options defined in cinder.volume.drivers.xio
-#
-
-# Default storage pool for volumes. (integer value)
-#ise_storage_pool=1
-
-# Raid level for ISE volumes. (integer value)
-#ise_raid=1
-
-# Number of retries (per port) when establishing connection to
-# ISE management port. (integer value)
-#ise_connection_retries=5
-
-# Interval (secs) between retries. (integer value)
-#ise_retry_interval=1
-
-# Number on retries to get completion status after issuing a
-# command to ISE. (integer value)
-#ise_completion_retries=30
-
-
-#
-# Options defined in cinder.volume.drivers.zadara
-#
-
-# Management IP of Zadara VPSA (string value)
-#zadara_vpsa_ip=<None>
-
-# Zadara VPSA port number (string value)
-#zadara_vpsa_port=<None>
-
-# Use SSL connection (boolean value)
-#zadara_vpsa_use_ssl=false
-
-# User name for the VPSA (string value)
-#zadara_user=<None>
-
-# Password for the VPSA (string value)
-#zadara_password=<None>
-
-# Name of VPSA storage pool for volumes (string value)
-#zadara_vpsa_poolname=<None>
-
-# Default thin provisioning policy for volumes (boolean value)
-#zadara_vol_thin=true
-
-# Default encryption policy for volumes (boolean value)
-#zadara_vol_encrypt=false
-
-# Default template for VPSA volume names (string value)
-#zadara_vol_name_template=OS_%s
-
-# Automatically detach from servers on volume delete (boolean
-# value)
-#zadara_vpsa_auto_detach_on_delete=true
-
-# Don't halt on deletion of non-existing volumes (boolean
-# value)
-#zadara_vpsa_allow_nonexistent_delete=true
-
-
-#
-# Options defined in cinder.volume.drivers.zfssa.zfssaiscsi
-#
-
-# Storage pool name. (string value)
-#zfssa_pool=<None>
-
-# Project name. (string value)
-#zfssa_project=<None>
-
-# Block size: 512, 1k, 2k, 4k, 8k, 16k, 32k, 64k, 128k.
-# (string value)
-#zfssa_lun_volblocksize=8k
-
-# Flag to enable sparse (thin-provisioned): True, False.
-# (boolean value)
-#zfssa_lun_sparse=false
-
-# Data compression-off, lzjb, gzip-2, gzip, gzip-9. (string
-# value)
-#zfssa_lun_compression=
-
-# Synchronous write bias-latency, throughput. (string value)
-#zfssa_lun_logbias=
-
-# iSCSI initiator group. (string value)
-#zfssa_initiator_group=
-
-# iSCSI initiator IQNs. (comma separated) (string value)
-#zfssa_initiator=
-
-# iSCSI initiator CHAP user. (string value)
-#zfssa_initiator_user=
-
-# iSCSI initiator CHAP password. (string value)
-#zfssa_initiator_password=
-
-# iSCSI initiators configuration. (string value)
-#zfssa_initiator_config=
-
-# iSCSI target group name. (string value)
-#zfssa_target_group=tgt-grp
-
-# iSCSI target CHAP user. (string value)
-#zfssa_target_user=
-
-# iSCSI target CHAP password. (string value)
-#zfssa_target_password=
-
-# iSCSI target portal (Data-IP:Port, w.x.y.z:3260). (string
-# value)
-#zfssa_target_portal=<None>
-
-# Network interfaces of iSCSI targets. (comma separated)
-# (string value)
-#zfssa_target_interfaces=<None>
-
-# REST connection timeout. (seconds) (integer value)
-#zfssa_rest_timeout=<None>
-
-
-#
-# Options defined in cinder.volume.manager
-#
-
-# Driver to use for volume creation (string value)
-#volume_driver=cinder.volume.drivers.lvm.LVMISCSIDriver
-
-# Timeout for creating the volume to migrate to when
-# performing volume migration (seconds) (integer value)
-#migration_create_volume_timeout_secs=300
-
-# Offload pending volume delete during volume service startup
-# (boolean value)
-#volume_service_inithost_offload=false
-
-# FC Zoning mode configured (string value)
-#zoning_mode=none
-
-# User defined capabilities, a JSON formatted string
-# specifying key/value pairs. (string value)
-#extra_capabilities={}
-
-
-[BRCD_FABRIC_EXAMPLE]
-
-#
-# Options defined in cinder.zonemanager.drivers.brocade.brcd_fabric_opts
-#
-
-# Management IP of fabric (string value)
-#fc_fabric_address=
-
-# Fabric user ID (string value)
-#fc_fabric_user=
-
-# Password for user (string value)
-#fc_fabric_password=
-
-# Connecting port (integer value)
-#fc_fabric_port=22
-
-# overridden zoning policy (string value)
-#zoning_policy=initiator-target
-
-# overridden zoning activation state (boolean value)
-#zone_activate=true
-
-# overridden zone name prefix (string value)
-#zone_name_prefix=<None>
-
-# Principal switch WWN of the fabric (string value)
-#principal_switch_wwn=<None>
-
-
-[CISCO_FABRIC_EXAMPLE]
-
-#
-# Options defined in cinder.zonemanager.drivers.cisco.cisco_fabric_opts
-#
-
-# Management IP of fabric (string value)
-#cisco_fc_fabric_address=
-
-# Fabric user ID (string value)
-#cisco_fc_fabric_user=
-
-# Password for user (string value)
-#cisco_fc_fabric_password=
-
-# Connecting port (integer value)
-#cisco_fc_fabric_port=22
-
-# overridden zoning policy (string value)
-#cisco_zoning_policy=initiator-target
-
-# overridden zoning activation state (boolean value)
-#cisco_zone_activate=true
-
-# overridden zone name prefix (string value)
-#cisco_zone_name_prefix=<None>
-
-# VSAN of the Fabric (string value)
-#cisco_zoning_vsan=<None>
-
-
-[database]
-
-#
-# Options defined in oslo.db
-#
-
-# The file name to use with SQLite. (string value)
-#sqlite_db=oslo.sqlite
-
-# If True, SQLite uses synchronous mode. (boolean value)
-#sqlite_synchronous=true
-
-# The back end to use for the database. (string value)
-# Deprecated group/name - [DEFAULT]/db_backend
-#backend=sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the
-# database. (string value)
-# Deprecated group/name - [DEFAULT]/sql_connection
-# Deprecated group/name - [DATABASE]/sql_connection
-# Deprecated group/name - [sql]/connection
-#connection=<None>
-
-# The SQLAlchemy connection string to use to connect to the
-# slave database. (string value)
-#slave_connection=<None>
-
-# The SQL mode to be used for MySQL sessions. This option,
-# including the default, overrides any server-set SQL mode. To
-# use whatever SQL mode is set by the server configuration,
-# set this to no value. Example: mysql_sql_mode= (string
-# value)
-#mysql_sql_mode=TRADITIONAL
-
-# Timeout before idle SQL connections are reaped. (integer
-# value)
-# Deprecated group/name - [DEFAULT]/sql_idle_timeout
-# Deprecated group/name - [DATABASE]/sql_idle_timeout
-# Deprecated group/name - [sql]/idle_timeout
-#idle_timeout=3600
-
-# Minimum number of SQL connections to keep open in a pool.
-# (integer value)
-# Deprecated group/name - [DEFAULT]/sql_min_pool_size
-# Deprecated group/name - [DATABASE]/sql_min_pool_size
-#min_pool_size=1
-
-# Maximum number of SQL connections to keep open in a pool.
-# (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_pool_size
-# Deprecated group/name - [DATABASE]/sql_max_pool_size
-#max_pool_size=<None>
-
-# Maximum number of database connection retries during
-# startup. Set to -1 to specify an infinite retry count.
-# (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_retries
-# Deprecated group/name - [DATABASE]/sql_max_retries
-#max_retries=10
-
-# Interval between retries of opening a SQL connection.
-# (integer value)
-# Deprecated group/name - [DEFAULT]/sql_retry_interval
-# Deprecated group/name - [DATABASE]/reconnect_interval
-#retry_interval=10
-
-# If set, use this value for max_overflow with SQLAlchemy.
-# (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_overflow
-# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
-#max_overflow=<None>
-
-# Verbosity of SQL debugging information: 0=None,
-# 100=Everything. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_connection_debug
-#connection_debug=0
-
-# Add Python stack traces to SQL as comment strings. (boolean
-# value)
-# Deprecated group/name - [DEFAULT]/sql_connection_trace
-#connection_trace=false
-
-# If set, use this value for pool_timeout with SQLAlchemy.
-# (integer value)
-# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
-#pool_timeout=<None>
-
-# Enable the experimental use of database reconnect on
-# connection lost. (boolean value)
-#use_db_reconnect=false
-
-# Seconds between database connection retries. (integer value)
-#db_retry_interval=1
-
-# If True, increases the interval between database connection
-# retries up to db_max_retry_interval. (boolean value)
-#db_inc_retry_interval=true
-
-# If db_inc_retry_interval is set, the maximum seconds between
-# database connection retries. (integer value)
-#db_max_retry_interval=10
-
-# Maximum database connection retries before error is raised.
-# Set to -1 to specify an infinite retry count. (integer
-# value)
-#db_max_retries=20
-
-
-#
-# Options defined in oslo.db.concurrency
-#
-
-# Enable the experimental use of thread pooling for all DB API
-# calls (boolean value)
-# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
-#use_tpool=false
-
-
-[fc-zone-manager]
-
-#
-# Options defined in cinder.zonemanager.drivers.brocade.brcd_fc_zone_driver
-#
-
-# Southbound connector for zoning operation (string value)
-#brcd_sb_connector=cinder.zonemanager.drivers.brocade.brcd_fc_zone_client_cli.BrcdFCZoneClientCLI
-
-
-#
-# Options defined in cinder.zonemanager.drivers.cisco.cisco_fc_zone_driver
-#
-
-# Southbound connector for zoning operation (string value)
-#cisco_sb_connector=cinder.zonemanager.drivers.cisco.cisco_fc_zone_client_cli.CiscoFCZoneClientCLI
-
-
-#
-# Options defined in cinder.zonemanager.fc_zone_manager
-#
-
-# FC Zone Driver responsible for zone management (string
-# value)
-#zone_driver=cinder.zonemanager.drivers.brocade.brcd_fc_zone_driver.BrcdFCZoneDriver
-
-# Zoning policy configured by user (string value)
-#zoning_policy=initiator-target
-
-# Comma separated list of fibre channel fabric names. This
-# list of names is used to retrieve other SAN credentials for
-# connecting to each SAN fabric (string value)
-#fc_fabric_names=<None>
-
-# FC San Lookup Service (string value)
-#fc_san_lookup_service=cinder.zonemanager.drivers.brocade.brcd_fc_san_lookup_service.BrcdFCSanLookupService
-
-
-[keymgr]
-
-#
-# Options defined in cinder.keymgr
-#
-
-# The full class name of the key manager API class (string
-# value)
-#api_class=cinder.keymgr.conf_key_mgr.ConfKeyManager
-
-
-#
-# Options defined in cinder.keymgr.conf_key_mgr
-#
-
-# Fixed key returned by key manager, specified in hex (string
-# value)
-#fixed_key=<None>
-
-
-#
-# Options defined in cinder.keymgr.key_mgr
-#
-
-# Authentication url for encryption service. (string value)
-#encryption_auth_url=http://localhost:5000/v3
-
-# Url for encryption service. (string value)
-#encryption_api_url=http://localhost:9311/v1
-
-
-[keystone_authtoken]
-
-#
-# Options defined in keystonemiddleware.auth_token
-#
-
-# Prefix to prepend at the beginning of the path. Deprecated,
-# use identity_uri. (string value)
-#auth_admin_prefix=
-
-# Host providing the admin Identity API endpoint. Deprecated,
-# use identity_uri. (string value)
-#auth_host=127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use
-# identity_uri. (integer value)
-#auth_port=35357
-
-# Protocol of the admin Identity API endpoint (http or https).
-# Deprecated, use identity_uri. (string value)
-#auth_protocol=https
-
-# Complete public Identity API endpoint (string value)
-#auth_uri=<None>
-
-# Complete admin Identity API endpoint. This should specify
-# the unversioned root endpoint e.g. https://localhost:35357/
-# (string value)
-#identity_uri=<None>
-
-# API version of the admin Identity API endpoint (string
-# value)
-#auth_version=<None>
-
-# Do not handle authorization requests within the middleware,
-# but delegate the authorization decision to downstream WSGI
-# components (boolean value)
-#delay_auth_decision=false
-
-# Request timeout value for communicating with Identity API
-# server. (boolean value)
-#http_connect_timeout=<None>
-
-# How many times are we trying to reconnect when communicating
-# with Identity API Server. (integer value)
-#http_request_max_retries=3
-
-# This option is deprecated and may be removed in a future
-# release. Single shared secret with the Keystone
-# configuration used for bootstrapping a Keystone
-# installation, or otherwise bypassing the normal
-# authentication process. This option should not be used, use
-# `admin_user` and `admin_password` instead. (string value)
-#admin_token=<None>
-
-# Keystone account username (string value)
-#admin_user=<None>
-
-# Keystone account password (string value)
-#admin_password=<None>
-
-# Keystone service account tenant name to validate user tokens
-# (string value)
-#admin_tenant_name=admin
-
-# Env key for the swift cache (string value)
-#cache=<None>
-
-# Required if Keystone server requires client certificate
-# (string value)
-#certfile=<None>
-
-# Required if Keystone server requires client certificate
-# (string value)
-#keyfile=<None>
-
-# A PEM encoded Certificate Authority to use when verifying
-# HTTPs connections. Defaults to system CAs. (string value)
-#cafile=<None>
-
-# Verify HTTPS connections. (boolean value)
-#insecure=false
-
-# Directory used to cache files related to PKI tokens (string
-# value)
-#signing_dir=<None>
-
-# Optionally specify a list of memcached server(s) to use for
-# caching. If left undefined, tokens will instead be cached
-# in-process. (list value)
-# Deprecated group/name - [DEFAULT]/memcache_servers
-#memcached_servers=<None>
-
-# In order to prevent excessive effort spent validating
-# tokens, the middleware caches previously-seen tokens for a
-# configurable duration (in seconds). Set to -1 to disable
-# caching completely. (integer value)
-#token_cache_time=300
-
-# Determines the frequency at which the list of revoked tokens
-# is retrieved from the Identity service (in seconds). A high
-# number of revocation events combined with a low cache
-# duration may significantly reduce performance. (integer
-# value)
-#revocation_cache_time=10
-
-# (optional) if defined, indicate whether token data should be
-# authenticated or authenticated and encrypted. Acceptable
-# values are MAC or ENCRYPT. If MAC, token data is
-# authenticated (with HMAC) in the cache. If ENCRYPT, token
-# data is encrypted and authenticated in the cache. If the
-# value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-#memcache_security_strategy=<None>
-
-# (optional, mandatory if memcache_security_strategy is
-# defined) this string is used for key derivation. (string
-# value)
-#memcache_secret_key=<None>
-
-# (optional) number of seconds memcached server is considered
-# dead before it is tried again. (integer value)
-#memcache_pool_dead_retry=300
-
-# (optional) max total number of open connections to every
-# memcached server. (integer value)
-#memcache_pool_maxsize=10
-
-# (optional) socket timeout in seconds for communicating with
-# a memcache server. (integer value)
-#memcache_pool_socket_timeout=3
-
-# (optional) number of seconds a connection to memcached is
-# held unused in the pool before it is closed. (integer value)
-#memcache_pool_unused_timeout=60
-
-# (optional) number of seconds that an operation will wait to
-# get a memcache client connection from the pool. (integer
-# value)
-#memcache_pool_conn_get_timeout=10
-
-# (optional) use the advanced (eventlet safe) memcache client
-# pool. The advanced pool will only work under python 2.x.
-# (boolean value)
-#memcache_use_advanced_pool=false
-
-# (optional) indicate whether to set the X-Service-Catalog
-# header. If False, middleware will not ask for service
-# catalog on token validation and will not set the X-Service-
-# Catalog header. (boolean value)
-#include_service_catalog=true
-
-# Used to control the use and type of token binding. Can be
-# set to: "disabled" to not check token binding. "permissive"
-# (default) to validate binding information if the bind type
-# is of a form known to the server and ignore it if not.
-# "strict" like "permissive" but if the bind type is unknown
-# the token will be rejected. "required" any form of token
-# binding is needed to be allowed. Finally the name of a
-# binding method that must be present in tokens. (string
-# value)
-#enforce_token_bind=permissive
-
-# If true, the revocation list will be checked for cached
-# tokens. This requires that PKI tokens are configured on the
-# Keystone server. (boolean value)
-#check_revocations_for_cached=false
-
-# Hash algorithms to use for hashing PKI tokens. This may be a
-# single algorithm or multiple. The algorithms are those
-# supported by Python standard hashlib.new(). The hashes will
-# be tried in the order given, so put the preferred one first
-# for performance. The result of the first hash will be stored
-# in the cache. This will typically be set to multiple values
-# only while migrating from a less secure algorithm to a more
-# secure one. Once all the old tokens are expired this option
-# should be set to a single value for better performance.
-# (list value)
-#hash_algorithms=md5
-
-
-[matchmaker_redis]
-
-#
-# Options defined in oslo.messaging
-#
-
-# Host to locate redis. (string value)
-#host=127.0.0.1
-
-# Use this port to connect to redis host. (integer value)
-#port=6379
-
-# Password for Redis server (optional). (string value)
-#password=<None>
-
-
-[matchmaker_ring]
-
-#
-# Options defined in oslo.messaging
-#
-
-# Matchmaker ring file (JSON). (string value)
-# Deprecated group/name - [DEFAULT]/matchmaker_ringfile
-#ringfile=/etc/oslo/matchmaker_ring.json
-
-
-[oslo_messaging_amqp]
-
-#
-# Options defined in oslo.messaging
-#
-
-# address prefix used when sending to a specific server
-# (string value)
-#server_request_prefix=exclusive
-
-# address prefix used when broadcasting to all servers (string
-# value)
-#broadcast_prefix=broadcast
-
-# address prefix when sending to any server in group (string
-# value)
-#group_request_prefix=unicast
-
-# Name for the AMQP container (string value)
-#container_name=<None>
-
-# Timeout for inactive connections (in seconds) (integer
-# value)
-#idle_timeout=0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace=false
-
-# CA certificate PEM file for verifing server certificate
-# (string value)
-#ssl_ca_file=
-
-# Identifying certificate PEM file to present to clients
-# (string value)
-#ssl_cert_file=
-
-# Private key PEM file used to sign cert_file certificate
-# (string value)
-#ssl_key_file=
-
-# Password for decrypting ssl_key_file (if encrypted) (string
-# value)
-#ssl_key_password=<None>
-
-# Accept clients using either SSL or plain TCP (boolean value)
-#allow_insecure_clients=false
-
-
-[profiler]
-
-#
-# Options defined in cinder.service
-#
-
-# If False fully disable profiling feature. (boolean value)
-#profiler_enabled=false
-
-# If False doesn't trace SQL requests. (boolean value)
-#trace_sqlalchemy=false
-
-
Code Review / openstack-build / cinder-build.git / commitdiff