The cirros image was rebuilt against the 3.13.0-83 kernel, drivers e1000e, igbvf...

[packages/trusty/cirros-testvm.git] / cirros-testvm / src-cirros / buildroot-2015.05 / board / telit / evk-pro3 / readme.txt

diff --git a/cirros-testvm/src-cirros/buildroot-2015.05/board/telit/evk-pro3/readme.txt b/cirros-testvm/src-cirros/buildroot-2015.05/board/telit/evk-pro3/readme.txt
new file mode 100644 (file)
index 0000000..ace9dd4
--- /dev/null
+++ b/cirros-testvm/src-cirros/buildroot-2015.05/board/telit/evk-pro3/readme.txt
@@ -0,0 +1,28 @@
+Buildroot board support for Telit EVK-PRO3 with Telit GE863-PRO3
+
+Official site:
+  http://www.telit.com/en/products.php?p_id=3&p_ac=show&p=10
+
+Build images:
+    make telit_evk_pro3_defconfig
+    make
+
+  images built:
+  - output/images/barebox.bin
+  - output/images/zImage
+  - output/images/rootfs.ubi
+
+
+Flash built images:
+  The first time you need to bootstrap from Telit Official Release 221.07.1007,
+  at the U-Boot prompt type:
+    U-Boot> loadb
+  send buildroot/output/images/barebox.bin
+    U-Boot> go 0x20200000
+
+  flash updated images using barebox through tftp:
+    barebox:/ erase dev/self0; cp /mnt/tftp/barebox.bin /dev/self0
+    barebox:/ erase /dev/nand0.kernel.bb; cp /mnt/tftp/zImage /dev/nand0.kernel.bb
+    barebox:/ erase /dev/nand0.rootfs.bb; cp /mnt/tftp/rootfs.ubi /dev/nand0.rootfs.bb
+    barebox:/ erase dev/env0
+    barebox:/ reset