--- /dev/null
+Prepare the SD card for the Minnow Board MAX
+============================================
+
+ 1. Partition the SD card with a GPT partition table
+
+ sudo cgdisk /dev/mmcblk0
+
+ Create two partitions:
+
+ a) First partition of a few dozens of megabytes, which will be
+ used to store the bootloader and the kernel image. Type must
+ be EF00 (EFI partition).
+
+ b) Second partition of any size, which will be used to store the
+ root filesystem. Type must be 8300 (Linux filesystem)
+
+ 2. Prepare the boot partition
+
+ We will format it, mount it, copy the EFI data generated by
+ Buildroot, and the kernel image.
+
+ sudo mkfs.vfat -F 32 -n boot /dev/mmcblk0p1
+ sudo mount /dev/mmcblk0p1 /mnt
+ sudo cp -a output/images/efi-part/* /mnt/
+ sudo cp output/images/bzImage /mnt/
+ sudo umount /mnt
+
+ 3. Prepare the root partition
+
+ We will format it, mount it, and extract the root filesystem.
+
+ sudo mkfs.ext4 -L root /dev/mmcblk0p2
+ sudo mount /dev/mmcblk0p2 /mnt
+ sudo tar -C /mnt -xf output/images/rootfs.tar
+ sudo umount /mnt
+
+ 4. Enjoy
+
+Additional information about this board can be found at
+http://www.minnowboard.org/ or http://elinux.org/Minnowboard:MinnowMax.