The cirros image was rebuilt against the 3.13.0-83 kernel, drivers e1000e, igbvf...

[packages/trusty/cirros-testvm.git] / cirros-testvm / src-cirros / buildroot-2015.05 / board / freescale / p2020ds / readme.txt

diff --git a/cirros-testvm/src-cirros/buildroot-2015.05/board/freescale/p2020ds/readme.txt b/cirros-testvm/src-cirros/buildroot-2015.05/board/freescale/p2020ds/readme.txt
new file mode 100644 (file)
index 0000000..a9735b0
--- /dev/null
+++ b/cirros-testvm/src-cirros/buildroot-2015.05/board/freescale/p2020ds/readme.txt
@@ -0,0 +1,40 @@
+You'll need to program the files created by buildroot into the flash.
+The fast way is to tftp transfer the files via one of the network interfaces.
+
+Alternatively you can transfer the files via serial console with an Ymodem
+file transfer from your terminal program by using a "loady" command
+from the u-boot prompt instead of the "tftp ..." commands stated below.
+Beware that serial console file transfers are quite slow!
+
+1. Program the DTB to NOR flash
+
+   => tftp ${loadaddr} p2020ds.dtb
+   => erase 0xeff00000 0xeff7ffff
+   => cp.b ${loadaddr} 0xeff00000 ${filesize}
+
+2. Program the kernel to NOR flash
+
+   => tftp ${loadaddr} uImage
+   => erase 0xec000000 0xec3fffff
+   => cp.b ${loadaddr} 0xec000000 ${filesize}
+
+3. Program the root filesystem to NOR flash
+
+   => tftp ${loadaddr} rootfs.jffs2
+   => erase 0xec400000 0xeeffffff
+   => cp.b ${loadaddr} 0xec400000 ${filesize}
+
+4. Booting your new system
+
+   => setenv jffs2boot 'setenv bootargs root=/dev/mtdblock4 rootfstype=jffs2 rw console=ttyS0,115200;bootm ec000000 - eff00000'
+
+   If you want to set this boot option as default:
+
+   => setenv bootcmd 'run jffs2boot'
+   => saveenv
+
+   ...or for a single boot:
+
+   => run jffs2boot
+
+   You can login with user "root".