The cirros image was rebuilt against the 3.13.0-83 kernel, drivers e1000e, igbvf...

[packages/trusty/cirros-testvm.git] / cirros-testvm / src-cirros / buildroot-2015.05 / board / congatec / qmx6 / readme.txt

diff --git a/cirros-testvm/src-cirros/buildroot-2015.05/board/congatec/qmx6/readme.txt b/cirros-testvm/src-cirros/buildroot-2015.05/board/congatec/qmx6/readme.txt
new file mode 100644 (file)
index 0000000..d2e0dca
--- /dev/null
+++ b/cirros-testvm/src-cirros/buildroot-2015.05/board/congatec/qmx6/readme.txt
@@ -0,0 +1,36 @@
+This is the minimal buildroot support for the Congatec QMX6 Qseven CoM
+
+conga-QMX6 is based on the freescale iMX6 SoC. For more information please
+have a look at http://www.congatec.com/products/qseven/conga-qmx6.html
+
+The configuration is based on the currently latest kernel release from
+Congatec's git repository which is based on 3.0.35. The bootloader u-boot
+is preconfigured on the CPU module and does not need to be replaced.
+
+To build the default configuration you only have to:
+
+       make qmx6_defconfig && make
+
+You will need a microSD card of sufficient size and the first or only
+partition configured as Linux type.
+
+To transfer the system to the card do:
+
+       $ sudo dd if=output/images/rootfs.ext2 of=/dev/sdX1
+
+You can optionally extend the filesystem size to the whole partition:
+
+       $ sudo resize2fs /dev/sdX1
+
+You can also update the card image without completely rewriting it:
+
+       $ sudo mount /dev/sdX1 /mnt
+       $ sudo tar xf output/images/rootfs.tar -C /mnt
+       $ sudo umount /mnt
+
+Connect a terminal program to the rs232 connector marked "CONSOLE"
+with baudrate set to 115200, insert the microSD card into the socket
+on the CPU module and power the board to watch the system boot.
+
+Booting from the SD card slot on the base board is currently not
+supported.