The cirros image was rebuilt against the 3.13.0-83 kernel, drivers e1000e, igbvf...

[packages/trusty/cirros-testvm.git] / cirros-testvm / src-cirros / buildroot-2015.05 / board / calao / qil-a9260 / barebox-2012.07.0-qil-a9260.patch

diff --git a/cirros-testvm/src-cirros/buildroot-2015.05/board/calao/qil-a9260/barebox-2012.07.0-qil-a9260.patch b/cirros-testvm/src-cirros/buildroot-2015.05/board/calao/qil-a9260/barebox-2012.07.0-qil-a9260.patch
new file mode 100644 (file)
index 0000000..a74e657
--- /dev/null
+++ b/cirros-testvm/src-cirros/buildroot-2015.05/board/calao/qil-a9260/barebox-2012.07.0-qil-a9260.patch
@@ -0,0 +1,36 @@
+From d076aa6182dc6df6bb311e60bbddb03573b9483b Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Fri, 3 Aug 2012 11:25:49 +0200
+Subject: [PATCH] Enable pull-up on Rx serial ports for the CALAO MB-QIL-A9260
+
+
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ arch/arm/boards/qil-a9260/init.c |    6 ++++++
+ 1 files changed, 6 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/boards/qil-a9260/init.c b/arch/arm/boards/qil-a9260/init.c
+index 305d733..b43cace 100644
+--- a/arch/arm/boards/qil-a9260/init.c
++++ b/arch/arm/boards/qil-a9260/init.c
+@@ -196,11 +196,17 @@ device_initcall(qil_a9260_devices_init);
+ static int qil_a9260_console_init(void)
+ {
+       at91_register_uart(0, 0);
++      at91_set_A_periph(AT91_PIN_PB14, 1);    /* Enable pull-up on DRXD */
++
+       at91_register_uart(1, ATMEL_UART_CTS | ATMEL_UART_RTS
+                          | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+                          | ATMEL_UART_RI);
++
+       at91_register_uart(2, ATMEL_UART_CTS | ATMEL_UART_RTS);
++      at91_set_A_periph(AT91_PIN_PB7, 1);     /* Enable pull-up on RXD1 */
++
+       at91_register_uart(3, ATMEL_UART_CTS | ATMEL_UART_RTS);
++      at91_set_A_periph(AT91_PIN_PB9, 1);     /* Enable pull-up on RXD2 */
+ 
+       return 0;
+ }
+-- 
+1.5.6.3
+