Vincent Hou [Fri, 10 Oct 2014 07:46:36 +0000 (15:46 +0800)]
IBM Storwize driver: Add local variable assignment to "ctxt"
* The method get_vdisk_params in helpers.py is missing a local variable
assignment for "ctxt", causing "UnboundLocalError: local variable
'ctxt' referenced before assignment. Adding the assignment should
resolve this issue.
* Add the unit tests coverage for get_vdisk_params.
Andrew Kerr [Thu, 29 May 2014 03:16:23 +0000 (08:46 +0530)]
NetApp fix to set non default server port in api
The non default netapp_server_port config option was not
getting set in api even if specified in cinder.conf. Its
made non mandatory and set if specified in the configuration.
Tomoki Sekiyama [Tue, 14 Oct 2014 23:09:44 +0000 (19:09 -0400)]
Fix LVM iSCSI driver tgtadm CHAP authentication
Currently CHAP Authentication in LVM iSCSI driver with tgtadm does not work.
This is because the tgtadm helper creates the target configuration file
with an 'IncomingUser' entry, which is ignored by tgtd.
This patch fixes it to 'incominguser'.
Mitsuhiro Tanino [Tue, 14 Oct 2014 16:41:41 +0000 (12:41 -0400)]
Export cinder volumes only if the status is 'in-use'
Currently, cinder volumes are exported both 'in-use' and 'available'
after restarting cinder-volume service.
This behavior was introduced following commit.
If the volumes are attached to nova instances, they should be exported
via tgtd after restarting cinder-volume.
But the volumes which are not attached to instances must not be exported
because everyone can connect these volumes.
This patch changes volume export behavior that exports a volume only if
the volume status is 'in-use'.
John Griffith [Fri, 10 Oct 2014 01:22:03 +0000 (19:22 -0600)]
Move SolidFire driver from httplib to requests
The SolidFire driver has been pretty static for a number of
years now, this change is to move from httplib for API calls
to requests. There are a number of advantages to this, including
performance, simplicity and ability to add things like ssl support
easily.
In addtion this change removes the confusing looping/retry mechanisms
that were in the issue_api_request method and replaces it with a
retry decorator for the exceptions we're interested in retrying.
Finally, I realize that my unit tests suck! That will be one of the
follow up items after a bit more clean up in the driver.
we need to to check the value of the configuration item glance_num_retries
in the code in order to ensure the " glance_num_retries " is equal or greater
than 0
Fix exception handling on test_delete_nonexistent_volume
test_delete_nonexistent_volume wants to check the exception would be
received when nonexistent volume was specified. But currently, this
test case checks the exception would be received when nonexistent
metadata was specified.
we need to to check the value of the configuration item eqlx_cli_max_retries
in the code in order to ensure the "eqlx_cli_max_retries" is equal to or
greater than 0
DocImpact: The 'retries' is not a configured number of attempts
Change-Id: If9fadda83a855b4bbda6129d3b3a64d296eb2b54
Closes-Bug: #1372454
Jay S. Bryant [Wed, 10 Sep 2014 03:07:48 +0000 (22:07 -0500)]
Remove deprecated use of gettextutils import _
The initial hacking check I wrote allowed users to check in code
using 'from cinder.openstack.common.gettextutils import _' or
'from cinder.i18n import _'. This was to ease the transition for
code that was in flight with the old import.
Now that we have moved Cinder over to using cinder.i18n and most
of the code that was in flight with the old import has been merged
and/or fixed, I am updating the hacking check to enforce the use of
cinder.i18n and fixing the cases that still had the old import.
Mark Sturdevant [Sat, 13 Sep 2014 06:48:16 +0000 (23:48 -0700)]
HP 3PAR: Don't ignore extra-specs snap_cpg when missing cpg
When snap_cpg is specified in extra-specs, it should be used.
For some reason, it was being ignored when extra-specs did not
also specify a user cpg.
When using a volume-type, the snapCPG should come from (in this order
of preference):
1. extra specs snap_cpg,
2. extra specs cpg,
3. config hp3par_cpg_snap,
4. config hp3par_cpg.
Mark Sturdevant [Mon, 9 Jun 2014 02:57:21 +0000 (10:57 +0800)]
3PAR with pool-aware-cinder-scheduler
HP 3PAR support for the pool-aware scheduler.
Adds support for a list of CPGs (pools). Uses
model update when our volume-type CPG is used
instead of the scheduler selected CPG.
In cinder.conf, hp3par_cpg now accepts a list of CPGs.
During create_backup failure handling, backup_update fails with
DataError ("Data too long for column") if the fail_reason is
greater than 255 characters. As a result, backup status is stuck
in 'creating' state. This patch avoids the problem by truncating
fail_reason to 255 characters before update.
Sean McGinnis [Tue, 7 Oct 2014 15:29:26 +0000 (10:29 -0500)]
Fix eqlx CLI output parsing on bad input
The eqlx driver would identify CLI command completion
by looking for the system name prompt at the end of
the output ("ARRAY_NAME>"). In some cases where there
is bad input the array will print an error, then
prepopulate the command again so it can be edited,
resulting in the output:
"ARRAY_NAME> [bad command]"
The array name prompt only gets printed on command
completion, so the fix is to look for the prompt
anywhere in the CLI output.
Sean McGinnis [Tue, 7 Oct 2014 15:10:57 +0000 (10:10 -0500)]
Eqlx fix NoSuchOptError for volume_name_template on clone
The eqlx driver was referencing the volume_name_template
config setting via self.configuration.volume_name_template.
This option is not imported in self.configuration.
The curent preferred method for volume clone is to reference
the passed in name, avoiding the need for the driver to
know what the naming template is all together.
John Griffith [Tue, 7 Oct 2014 17:49:58 +0000 (11:49 -0600)]
Make sure device support Direct before setting
We added '-t none' option to the qemu-img convert operation
in image_utils.py a while back to accomodate a couple of
backend devices that didn't flush writes on disconnect.
(Change: I7a04f683add8c23b9125fe837c4048ccc3ac224d)
The only problem here is that some backend devices don't
support Direct mode and raise an exception and fail when
setting this option.
This patch adds a simple check using dd to see if the dest
supports the Direct flag and only sets '-t none' if the device
does in fact support it.
Additionally it was brought up that even yet other backends
are using file devices not blk devices. In their case setting
Direct will still work, however it's sub-optimal as qemu-convert
has internal mechanisms to make sure flushing etc are done
correctly and efficiently for those devices. So to accomodate
that particular use case I'm also adding a check if blk dev
that can be used for determining whether to set Direct for the
qemu-convert process.
Tom Barron [Tue, 23 Sep 2014 22:05:40 +0000 (18:05 -0400)]
Eseries warn if multipath is not set for img xfer
Warn at driver startup if the configuration option
"use_multipath_for_image_xfer" has not been set to "True". Eseries filers
require appropriate multipath/DMMP configuration on the host running the
cinder volume process for image transfers to work reliably.
Currently, the Coraid driver requires storing Storage Repository
name in volume type key named 'coraid_repository' or different key name
if a value of the 'coraid_repository_key' option changed in the cinder
configuration file.
In case of creating a volume without volume type associated or creating
a volume with volume type that doesn't have an appropriate key with
the repository name, volume creation fails.
That is an inconvenient behaviour, especially in case of using that with
Tempest that creates new volume types but obviously doesn't know
that it should add keys with the repository name.
In order to fix that, introduce a 'coraid_default_repository' config
option that allows to set a default repository to use if one is not
specified in the volume type key.
In case if neither volume type nor config file provide a repository
name, throw CoraidException with description of the problem.
Windows SMBFS: Handle volume_name in _qemu_img_info
The volume_name is now parsed to the _qemu_img_info wrapper. As
this method is not prone to security issues because this driver
does not support raw images (at least not yet), we don't have to
perform any checks on the backing image file path.
Thus, this method simply ignores this argument that will be parsed
by the base class methods.
Sean McGinnis [Fri, 26 Sep 2014 20:21:35 +0000 (15:21 -0500)]
Handle eqlx SSH connection close on abort.
EqualLogic array CLI operation timeout causes the
SSH thread to be aborted. This would cause SSH
sessions to be orphaned and hit a max connection
limit on the array. This fix catches these aborts
and makes sure the connection is closed.
Clinton Knight [Fri, 26 Sep 2014 16:07:44 +0000 (12:07 -0400)]
Deprecate / obsolete NetApp volume extra specs
The NetApp Data ONTAP (Cluster-mode) NFS & iSCSI drivers for Juno support
the Cinder pools feature, but the drivers are reporting two qualified
extra specs that must be converted to unqualified extra specs in order to
be used by the Cinder scheduler's capability filter. Furthermore, there
are four extra specs that must be deprecated due to having the pools
feature. Warnings will be logged during volume creation if any of the
obsolete or deprecated extra specs are seen in the volume type.
Patrick East [Tue, 30 Sep 2014 18:47:42 +0000 (11:47 -0700)]
Fix race condition in ISCSIConnector _disconnect_volume_multipath_iscsi
This is a similar issue as seen in
https://bugs.launchpad.net/cinder/+bug/1375382
The list of devices returned by driver.get_all_block_devices() in
_disconnect_volume_multipath_iscsi will potentially contain broken
symlinks as the SCSI devices have been deleted from calling
self._linuxscsi.remove_multipath_device(device_realpath) right before
_disconnect_volume_multipath_iscsi but the udev rule for the symlink
may not yet have completed.
Adding in a check to os.path.exists() will ensure that we will not
consider the broken symlinks as an “in use” device.
Juan Zuluaga [Wed, 24 Sep 2014 22:51:07 +0000 (18:51 -0400)]
ZFSSA iSCSI vol create fails with vol type option
Vol create with volume-type option is not working since
volume_backend_name contains the class name as
predefined string. No matter what was specified in cinder.conf
as volume_backend_name, volume creation failed.
Multi-backend option and using extra specs to create custom volumes
won't work.
The fix is to look whether volume_backend_name is part of the
configuration or falls into the class name in case there is
no backend name.
Patrick East [Mon, 29 Sep 2014 17:54:22 +0000 (10:54 -0700)]
Fix race condition in ISCSIConnector disconnect_volume
The list of devices returned by driver.get_all_block_devices() will
sometimes contain broken symlinks as the SCSI device has been deleted
but the udev rule for the symlink has not yet completed.
Adding in a check to os.path.exists() will ensure that we will not
consider the broken symlinks as an “in use” device.
Vincent Hou [Fri, 12 Sep 2014 08:10:02 +0000 (16:10 +0800)]
IBM Storwize driver: Retype the volume with correct empty QoS
* Currently for Storwzie driver, if the new type does not have QoS
configurations, the old QoS configurations remain in the volume after
retyping it. It should be retyped into a volume with empty QoS for the
Storwize driver.
* Refactor three dicts into one for better maintainance of the QoS keys
for Storwize driver.
VMware:Unquote folder name for folder exists check
vCenter server escapes special characters in the folder name using URL
encoding and returns back the encoded string while querying. This causes
the check for folder existence to return false. Therefore, folder
creation is reattempted which eventually fails. This patch fixes the
problem by decoding the folder name returned by vCenter before
comparison.
ArkadyKanevsky [Wed, 27 Aug 2014 21:47:37 +0000 (16:47 -0500)]
Fixing format for log messages
code_cleanup_batching for EQL driver
Follow log essage format for i18n - http://docs.openstack.org/developer/oslo.i18n/guidelines.html#adding-variables-to-log-messages
Jay S. Bryant [Thu, 25 Sep 2014 20:58:41 +0000 (15:58 -0500)]
Update /etc/cinder/cinder.conf.sample for memcache
It appears that an update to keystone middleware earlier today
added options for memcache_secret_key, memcache_pool_dead_retry,
memcache_pool_maxsize, memcache_pool_socket_timeout,
memcache_pool_unused_timeout, memcache_pool_conn_get_timeout and
memcache_use_advanced_pool. The commit that added these options
was: a7beb50b38be5c3dd4c44d68ad79d1bb206dab6b - "Add an optional
advanced pool of memcached clients".
This has once again caused the check_uptodate.sh script to fail.
Code Review / openstack-build / cinder-build.git / log