Joseph Vokt [Fri, 10 Jul 2015 20:10:40 +0000 (13:10 -0700)]
3PAR: Adding performance metrics to volume status
If one storage backend has high load while another has lower load,
when a user/admin creates a volume, the current evaluator/scheduler
may place the volume on the backend with higher load. In many cases,
the evaluator/scheduler should place that volume on the backend
with the lowest load for load balancing purposes. In general, for load
balancing virtual volume placement, an evaluator/scheduler needs
access to performance metrics (e.g. IOPS throughput, bandwidth,
latency, IO size) to measure load, but Cinder drivers don't generally
report those metrics.
Although these performance metrics are available from the 3PAR CLI,
they are currently inaccesible in the evaluator/scheduler. The
proposed changes add these metrics to the volume status report and
thus make them accesible by the evaluator/scheduler.
In cinder/volume/drivers/san/hp/hp_3par_common.py, uses the 3PAR
client method HP3parClient.getCPGStatData to get performance metrics,
and adds new fields in the output of HP3PARCommon.get_volume_stats
corresponding to the performance metrics: IOPS throughput, bandwidth,
latency, io_size, queue_length, and avg_busy_perc. These metrics are
taken by averaging samples taken once per day for the last week.
In cinder/tests/unit/test_hp3par.py, adds unit tests in
TestHP3PARFCDriver.test_get_volume_stats and in
TestHP3PARISCSIDriver.test_get_volume_stats.
Kendall Nelson [Mon, 20 Jul 2015 20:06:21 +0000 (15:06 -0500)]
Enable cinder-manage to remove services
These changes are to enable cinder-manage to remove old services
from the database like nova does. All that is being added is the remove
method to manage.py and tests to cover this new method in test_cmd.py.
The command will remove the binary from the list of running services
in the db that can be viewed via "cinder-manage service list". NOTE:
Active and restarted services will re-populate the DB with their current
status automatically.
To use this new command, the user types "cinder-manage service remove
<binary> <host>" and the service will be removed.
This patch changes the way we handle volume detach
attempts when the attachment_id is already detached
and/or when the volume has no attachments. We now
handle this the same way we do with deleting volumes
that don't exist. We return success.
This patch also takes care to make sure we safely reset
the volume status to what it should be depending on if
there are other attachments. If the attachment_id is
passed in and that attachment is detached, but there are
other attachments, we want to make sure that the volume is
left in an in-use state, not available.
Michal Dulko [Thu, 13 Aug 2015 12:45:15 +0000 (14:45 +0200)]
Add objects.register_all() to cinder-all command
In cmd/all.py registration of objects was missing. This caused running
cinder-all command to raise exceptions about unknown objects. Following
commit fixes this problem.
Sasikanth [Thu, 25 Jun 2015 10:32:29 +0000 (16:02 +0530)]
GPFS volume encryption-at-rest support
This patch extends the capability of gpfs driver to support volume encryption
at rest using GPFS Native Encryption feature (https://ibm.biz/BdXPBm).
This includes:
1. Verification of configured gpfs backend to support encryption at rest.
2. Driver exposes gpfs_encryption_rest capability via volume type convention.
Usage - Cloud admin creates a volume type "encrypted" with extra-specs
gpfs_encryption_rest=True
Every volume created using type "encrypted", the volumes will be encrypted
at rest.
DocImpact
Needs an update in gpfs driver documentation, as this patch introduces
encrypted backend support.
The symlinks in /dev/disk/by-id/ (in a Linux guest OS running in VMware
ESX based Nova instance) use UUID of virtual disk as the SCSI device ID
when disk.EnableUUID is set to True in the virtual machine configuration
file. This patch sets the UUID of virtual disk corresponding to a Cinder
volume (at the time of volume creation) to volume ID so that end-users
(of Nova instance) can identify the device corresponding to an attached
volume in the guest using /dev/disk/by-id symlink.
For example, given a Cinder volume with ID = xyz, user can identify the
device corresponding to the volume in instance's guest using the symlink
/dev/disk/by-id/scsi-xyz provided disk.EnableUUID is set to True in the
instance's virtual machine configuration file (in ESX).
Note: If the UUID of the virtual disk corresponding to a volume is unset
at the time of volume creation, a random UUID will be used.
There are test cases that require oslo.vmware and the change made in the
commit for tox doesn't cover the case where run_tests.sh is used. Without
including oslo.vmware in the test-requirements file there are a number of
test cases that fail without the library installed.
This patch resolves the issue by move oslo.vmware over to the
test-requirements file.
Eric Harney [Mon, 16 Jun 2014 19:43:51 +0000 (15:43 -0400)]
LVM Thin Provisioning auto-detect
Add the ability to set lvm_type=auto, which will
enable thin provisioning if the system supports it,
and the configured volume group either:
a) has a pool LV with the expected name or
b) has no LVs
This, along with thin-provisioning accounting, will
give a path to move toward thin LVM as the default.
HP data protector's backup of vCenter inventory is failing
for 'in-use' Cinder volumes because the vmdk is attached
to two VMs (Nova instance and the backing VM corresponding
to Cinder volume). The solution is to skip the backing VM
during data protector's backup.
This patch adds key 'cinder.volume.id' with value set to
volume UUID in volume's vCenter config file so that other
vCenter solutions can uniquely identify Cinder volumes.
Skyler Berg [Tue, 4 Aug 2015 21:44:58 +0000 (14:44 -0700)]
Fix argument order for assertEqual in tests
Some tests incorrectly use the order assertEqual(observed, expected)
instead of the correct order, assertEqual(expected, observed). This
patch corrects this issue.
James Carey [Thu, 6 Aug 2015 05:13:15 +0000 (05:13 +0000)]
Fix order of parms in assertEqual for scheduler ut
When assertEqual is used it should be assertEqual(expected, observed).
Constant values are always the expected. This patch makes them the
first parameter and fixes some other non-constant cases.
Tina [Fri, 7 Aug 2015 04:33:03 +0000 (00:33 -0400)]
VNX driver needs extra params for create cg from src
The cinder manager is passing 2 additional parameters (source_cg and
source_vols) to create_consistencygroup_from_src of driver. VNX
driver needs to add these 2 parameters.
lisali [Fri, 7 Aug 2015 06:35:27 +0000 (14:35 +0800)]
Prevent creating encrypted volume with image
When creating an encrypted volume with a unencrypted image,
cinder just copies the unencrypted data to the volume,
which keeps unencrypted data in the volume.
But when booting/attaching the volume to Nova, it thinks
encrypted data on the volume. As a result, Nova reads
the data incorrectly.
The fix is to prevent such action. Later, we can
implement to write encrypted data in encrypted volumes
when creating from unencrypted image.
Matthew Edmonds [Fri, 17 Jul 2015 20:42:35 +0000 (16:42 -0400)]
mark oslo.vmware as optional dependency
Driver-specific requirements are not hard requirements, since the
choice of drivers is up to the operator. The oslo.vmware module is
herein moved out of requirements.txt and instead listed as an optional
dependency using the extras functionality in setup.cfg.
A check is added to the vmdk driver to gracefully handle import errors
if the vmdk driver is used and oslo.vmware is not found.
Xing Yang [Mon, 10 Aug 2015 02:41:21 +0000 (22:41 -0400)]
Handle missing temp volume and snapshot during cleanup
When backup service is started, we try to clean up temp volumes
and snapshots in previously failed backups. If the temp volume
or snapshot is already deleted, we will get VolumeNotFound or
SnapshotNotFound exceptions. These exceptions should be handled.
Also temp_volume_id and temp_snapshot_id should be set to None
after they are deleted.
is_public should be checked when creating volume type, otherwise DBError
will be raised in cinder-api, and the user will receive a 500 Internal
server error.
John Griffith [Sun, 9 Aug 2015 16:00:51 +0000 (10:00 -0600)]
Ignore InsecureReq warning in SolidFire Driver
The python requests package logs the use of Insecure as
a warning. Currently the use of http vs https is a
configurable option, and for those that use http, the
log files include a Warning message for every single
request to the SolidFire Cluster.
In our case we're explicitly providing the
option to use http instead of https, so we can safely
ignore this message and remove it from the logs.
Xing Yang [Fri, 7 Aug 2015 18:49:30 +0000 (14:49 -0400)]
Attach snapshot - driver only
This patch is a continuation of adding support for
non-disruptive backup. It provides a more efficient way
to backup an attached volume by creating a temp snapshot.
Since this is used internally for backup, the attach
snapshot interface is added in the driver only. For
drivers not implementing the attach snapshot interface,
backup will still be done using a volume.
Xing Yang [Fri, 7 Aug 2015 22:02:21 +0000 (18:02 -0400)]
Remove bad tests for the VMAX driver
There are a few tests for the VMAX driver that are causing lots of
unit test failures on various patches. I think the reason is several
tests are using the config file with the same name which is created
during setup and deleted at cleanup. When concurrency is > 1, one test
could have deleted the file while another test is trying to read from
it. So the unit tests need to be re-designed to isolate the impact on
each other. This will be worked on. For the short term, I want to
remove the bad tests to reduce the number of unit test failures on
other patches.
Anna Sortland [Tue, 14 Jul 2015 19:51:51 +0000 (14:51 -0500)]
Update authorization actions for services API
Previously, the services extension used generic authorization check
"volume_extension:services" for both index and update APIs.
This change creates separate rules for index and update APIs
so that it is possible to assign different rules to different users.
The sample /etc/cinder/policy.json is also updated to include new rules:
"volume_extension:services:index": "",
"volume_extension:services:update" : "rule:admin_api"
Xing Yang [Fri, 7 Aug 2015 18:11:58 +0000 (12:11 -0600)]
Fix missing parameters in driver CG interface
Clone CG introduced new parameters in the driver CG interface
create_consistencygroup_from_src, but the drivers were not updated
to add the new parameters. This patch adds them for pure.py
and xtremio.py.
Related patch for the VNX driver:
https://review.openstack.org/210319
ankitagrawal [Tue, 4 Aug 2015 11:20:12 +0000 (04:20 -0700)]
Fix list comparison for empty list
Replaced boolean expression with 'not fields' in "_filter" method.
Also updated unit test cases which calls "_filter" method with
expected value of fields in restore methods.
The unit test "test_restore_vol_meta" was failing for empty list
because after updating the volume metadata, container was passed
to the "_restore_vol_meta" method where "metadata" is expected.
So fixed this unit test by passing the expected value to the
"_restore_vol_meta" method.
Xi Yang [Thu, 21 May 2015 08:09:21 +0000 (04:09 -0400)]
Snap copy feature for EMC VNX Cinder driver
Currently in VNX Cinder driver, a full-copy will be performed
when creating a volume from snapshot or volume and it is
time-consuming. This patch is going to address this issue by
providing an alternative way which is performing a snap-copy
when creating a volume from snapshot or volume. This can
accelerate the proccess a lot. And if the user wants to perform
a full-copy on the snap-copy volume, migration or retype can be
triggered on it. And we implement update_migrated_volume to
support migration and retype on the snap-copy volume.
This patch adds the connector object as a parameter
to all driver create_export calls. This will enable
drivers to actually use create_export method for doing
what they are now doing inside of initialize_connection.
Sean McGinnis [Thu, 6 Aug 2015 21:46:27 +0000 (16:46 -0500)]
Remove unit test migration logging
DB migration unit tests output a bunch of 'Loading script'
messages that are of little to no value. This patch raises
the default migrations module logging level to WARNING to
prevent these debug messages from cluttering the output.
Change-Id: Ib1bb5a0efc791a41f2d4cb1ea0e6eba4658097a8 Co-Authored-By: John Griffith <john.griffith@solidfire.com>
Code Review / openstack-build / cinder-build.git / log