Huawei OceanStor HVS-series enterprise storage system is an optimum
storage platform for next-generation data centers that feature
virtualization, hybrid cloud, simplified IT, and low carbon footprints.
This patch add an iSCSI driver and a FC driver for Huawei HVS storage
system, using REST. We define a common module for both iSCSI driver and
FC driver. The drivers support volume type, QoS.
zhangchao010 [Sat, 31 Aug 2013 02:24:43 +0000 (10:24 +0800)]
Add Fibre Channel drivers for Huawei storage systems
This is the third patch, changes as follows:
1.Add Fibre Channel drivers for huawei OceanStor T series and Dorado
series arrays. Dorado FC driver inherits codes from FC driver of T.
The FC drivers call module ssh_common which has been defined in
the preview patch: https://review.openstack.org/#/c/41721/
2.Add unit test for the changes.
zhangchao010 [Sat, 31 Aug 2013 02:23:35 +0000 (10:23 +0800)]
Refactor huawei Dorado array iSCSI driver
This is the second patch, changes as follows:
1.Add ISCSIDriver for Dorado arrays. The ISCSIDriver inherit from T.
1.Add a common class DoradoCommon for both FC and iSCSI drivers. The common class
inherit from T common for they have many common functions.
2.Add unit test for Dorado drivers.
zhangchao010 [Thu, 29 Aug 2013 02:33:52 +0000 (10:33 +0800)]
Refactor Huawei iSCSI driver
We plan to refactor Huawei iSCSI drivers and add Huawei FC
drivers. For that's a huge change, we break the codes into
three patches:
1.Refactor T iSCSI driver
2.Refactor Dorado iSCSI driver
3.Add FC drivers for both T and Dorado arrays.
This is the first patch, changes as follows:
1.Define a common class for both FC and iSCSI drivers, and
also provide a unified class HuaweiVolumeDriver for users.
The unified driver will call HuaweiTISCSIDriver according to
users' configuration. The HuaweiTISCSIDriver is a subclass of
driver.ISCSIDriver, so it could get good inheritance.
2.Support volume type.
3.Refactor unit test to make it more logic clear and add more
test cases to get higher coverage rate.
Mathieu Gagné [Sat, 31 Aug 2013 01:59:59 +0000 (21:59 -0400)]
Clone volume with right size with SolidFire
It is possible to clone a volume with a size greater than
the source volume. When using the SolidFire driver, the volume size
was not passed in the call made to the SolidFire API when
cloning a volume.
It resulted in a cloned volume having the same size as the source
volume but the correct size in the Cinder database.
This changes makes sure the cloned volume has the correct size
by explicitly passing the requested size when calling
the SolidFire API and cloning the volume.
Kaitlin Farr [Fri, 30 Aug 2013 19:38:38 +0000 (15:38 -0400)]
Fixes bug to allow for encrypted volume deletion
delete_key in cinder/volume/api.py was called with incorrect parameters.
The error prevented encrypted volumes from being deleted, but the fix
has been applied and unittests written to prove the functionality.
Zhiteng Huang [Fri, 30 Aug 2013 18:59:47 +0000 (02:59 +0800)]
Move comment back to right place
The comment about skipping schedule for create volume from snapshot
in cast_create_volume() was mis-placed when this code was ported to
taskflow. This patch moves the comment back to where it belongs.
Zhongyue Luo [Fri, 30 Aug 2013 05:33:22 +0000 (13:33 +0800)]
Utilizes assertIn and assertNotIn
Using assertTrue and the 'in' operator to test if an element is in a sequence
is too python2.4. Our unit testing framework 'testtools' support assertIn and
assertNotIn, included from python 2.7, which were created for these types of
tests. Let's use assertIn or assertNotIn for these tests.
- Implemented APIs: create_volume, delete_volume, initialize_connection,
create_snapthot, delete_snapshot, create_volume_from_snapshot,
create_cloned_volume
- Modified etc/cinder/cinder.conf.sample adding details for the driver
- Added suds dependency in requirements.txt
- create_volume: does no work. Volume's backing is created lazily
- delete_volume: delete backing if present
- initialize_connection: if backing, not present, create backing, else
provide backing details to nova to perform attach
Nova BP/vmware-nova-cinder-support
- create_snapshot: Creates the snapshot of the backing
- delete_snapshot: Deletes the snapshot of the backing
- create_volume_from_snapshot: Creates a full/linked clone from the snapshot
point in VC. In ESX, copies the VM backing files, registers and reverts to
the appropriate snapshot point.
- create_cloned_volume: Creates a full/linked clone in VC. In ESX, copies the
VM backing files and registers as a new backing.
- Written appropriate unit tests
- Work item in BP/vmware-vmdk-cinder-driver
Julia Varlamova [Thu, 29 Aug 2013 07:56:17 +0000 (11:56 +0400)]
Remove _create_volume function from several tests
Remove _create_volume function from
- db/test_transfers.py
- api/contrib/test_backups.py
- test_gpfs.py
- test_volume_transfer.py
- test_volume.py
And use create_volume from tests/utils.py instead
Kui Shi [Fri, 30 Aug 2013 07:18:10 +0000 (15:18 +0800)]
Don't need to init testr explicitly
In run_tests.sh, function init_testr will initialize testr if the
directory .testrepository is not existed. Actually, testr will do
the check before run the test:
In Python package testrepository, setuptools_command.py:Testr.run
68 def run(self):
69 """Set up testr repo, then run testr"""
70 if not os.path.isdir(".testrepository"):
71 self._run_testr("init")
Kurt Martin [Wed, 28 Aug 2013 21:08:49 +0000 (14:08 -0700)]
Add missing LH SAN driver features for Havana
The LeftHand driver did not support snapshot or extend volume.
The following features are part of the minimum driver features
that should be implemented in every cinder driver. This patch
adds the following missing features;
create snapshot
delete snapshot
create volume from snapshot
extend volume
It also fixes the DocStrings in the unit test so they pass the
checks.
Julia Varlamova [Thu, 29 Aug 2013 07:41:34 +0000 (11:41 +0400)]
Add kwargs to create_volume in tests/utils.py
Add availability_zone parameter and kwargs to make create_volume
function more flexible in order to use this function in
unit tests.
The goal is to remove inner _create_volume function in:
- db/test_transfers.py
- api/contrib/test_backups.py
- test_gpfs.py
- test_volume_transfer.py
- test_volume.py
and to use create_volume from tests/utils instead.
Zhi Yan Liu [Fri, 19 Jul 2013 22:18:24 +0000 (06:18 +0800)]
Adding Read-Only volume attaching support to Cinder
1. Adding an API extension to allow clients set volume Read-Only flag on
demand.
2. Require client to provide and be aware of volume attaching mode when
they call 'os-attach' API.
3. Adding a 'access_mode' field to connection info which
'os-initialize_connection' API returned. This field should be used by
client such as Nova to use correct mode accessing attached volume.
Currently access mode can be 'rw' or 'ro'.
4. In future, the driver within Cinder need to ensure the volume be
exposed under the correct access mode which connection info described,
for example backend should set volume to readonly mode when connection
info ask client using 'ro' access mode consume attached volume. That
means Read-Only is not only a attaching mode but also a status for a
volume.
blueprint read-only-volumes
Change-Id: I4c84614d6541d5f7c358abadb957da7b8c3d9c48 Signed-off-by: Zhi Yan Liu <zhiyanl@cn.ibm.com>
Ben Swartzlander [Wed, 28 Aug 2013 04:43:20 +0000 (21:43 -0700)]
Add NFS/GlusterFS support to brick library
Refactor NFS driver to use the brick library to perform mounts
rather than duplicating the mount code. Some of the NFS unit
test code was rewritten to test the brick implementation because
the old mount code was moved.
The Gluster driver was slightly affected in the refactoring, but
does not yet use brick to perform attaches.
Joshua Harlow [Wed, 21 Aug 2013 01:06:32 +0000 (18:06 -0700)]
Move create_volume flow to a subfolder
In order to start splitting up the create_volume flow into
smaller files we will start by moving the create_volume.py
file to a folder with just __init__.py and this will then
act as the base for create_volume task modules.
Also add in a utils file that contains to start the commonly
used debug listener attachment mechanism.
Zhongyue Luo [Tue, 27 Aug 2013 02:04:47 +0000 (10:04 +0800)]
Import order cleanup
According to
https://github.com/openstack-dev/hacking/blob/master/HACKING.rst#imports
imports must be ordered by the full module path by the below template
{{stdlib imports in human alphabetical order}}
\n
{{third-party lib imports in human alphabetical order}}
\n
{{project imports in human alphabetical order}}
\n
\n
{{begin your code}}
Michael Kerrin [Tue, 27 Aug 2013 10:48:45 +0000 (10:48 +0000)]
Migrate manage script needs import of db session module
This import looks like it is not used but importing this module as
the side effect of defining the olso configuration. Without it the
script will not work.
Avishay Traeger [Mon, 19 Aug 2013 10:45:38 +0000 (13:45 +0300)]
Migration for attached volumes
Enable migration for attached volumes by calling Nova to have the
hypervisor copy the data (Nova's swap_volume feature). A new API
function is added for Nova to call once it is done copying to finish
the Cinder side of the migration.
The overall 'generic' migration flow (i.e., not performed by a driver)
is as follows:
1. Creates a new volume
2a. If the source volume's state is 'available', attach both volumes
and run 'dd' to copy, then detach both. When finished, call the
migrate_volume_completion function.
2b. If the source volume's state is 'in-use', call Nova to perform the
copy. Nova will attach the new volume, copy the data from the
original volume to the new one, and detach the original volume.
When the copy completes, Nova will call Cinder's new
migrate_volume_completion function.
3. The migrate_volume_completion function deletes the original volume,
and calls the database API's finish_volume_migration function. This
copies all of the new volume's information to the original, and
deletes the new volume's row, and thus we can keep using the
original volume_id (the user sees no change).
We also don't change the original volume's status, and instead add a
migration_status column which only selected users can see (e.g., admin).
The migration status is None when no migration is in progress, whether
it succeeded or failed. The admin should check the volume's current
host to determine success or failure. This is meant to simplify
operations. The user will only be aware of a migration if they try to
change the volume's state during the course of a migration.
As mentioned, we change the volume while keeping the original volume
ID. Because a volume's name depends on its ID, the new volume will have
a different name than the original. This is the purpose of the name_id
field in the database - the name is now based on name_id. So although
we keep the original volume's ID, we use the new volume's ID as the
name_id. Thus we can remove the rename_volume function - it is no
longer necessary because the name_id field in the database already
allows for the volume's name on the backend to not rely on its ID.
The user than can see the migration_status can also see the
name_id, in case they need to find it on the backend.
There were a few other places throughout the code that relied on
constructing a volume's name from its ID, and those were fixed.
Add an optimized migration path for when the source and destination are
managed by the same storage. If the source and destination pools have
the same extent_size, it will use the optimal migratevdisk command.
Otherwise, it will use addvdiskcopy and rmvdiskcopy, which must be
watched until the copies are sync'ed.
Zhongyue Luo [Mon, 19 Aug 2013 07:39:00 +0000 (15:39 +0800)]
Removes exception instance creation on execute()
For every excption raised in utils.execute(), a new instance is created.
This patch removes this redundant step and directly uses exceptions
defined in Oslo.
John Griffith [Tue, 27 Aug 2013 00:52:02 +0000 (00:52 +0000)]
Fix except in lvm.py
Consolidation of brick exceptions into a single
brick exception.py file neglected to updated files
that were using it:
(see change I577d403f02c2fd0d727d2694776008e1e9791453)
The result is the lvm driver was doing an except on lvm.VolumeGroupNotFound
which didn't exist anymore as it's in brick/exception now.
We still need to clean up exceptions all through here, and this still
isn't handled by service init anyway, but at least with this we are
raising a valid exception.
John Griffith [Mon, 26 Aug 2013 18:23:49 +0000 (12:23 -0600)]
Add automated check of conf sample
This adds check_uptodate to run_tests and
tox.ini checks.
This also requires that we add novaclient to the
test-requires, since we try and poke at cinder/compute/nova.
There is another implementation in use to do this that
pulls in openstack.common.config.generator,
(see ceilometer project for a pretty slick impl), however
adding that also pulls in a rather large list of
updates and dependencies that quite frankly Cinder
doesn't need and the ones that we do use break
a number of things in Cinder.
There's also a number of additional options added
to generate_sample that I don't think we need right now.
In the future we'll probably want to go this route
but for now I'd just like to get automated checking
in place.
John Griffith [Sat, 24 Aug 2013 16:23:29 +0000 (10:23 -0600)]
Sync up with global requirements
This is a pull from openstack/requirements.
Note that pep8, pyflakes and flake8 are now specified
as deps in hacking, so we can remove those here. Also
if we don't remove them then we run into version conflicts
when hacking tries to set things up.
Code Review / openstack-build / cinder-build.git / log