We had the call in the manager as part of a periodic,
it did nothing at all. Some drivers had comments "no idea
what to do with this", even better we had unit tests that
faked out a call that returned nothing and asserted it was
nothing. ?!?
Mitsuhiro Tanino [Fri, 22 Jan 2016 16:31:25 +0000 (11:31 -0500)]
[LVM] Restore target config during ensure_export
If server crash or reboot happened, LIO target configuration
will be initialized after boot up a server. Currently, Cinder
has a functionality to save LIO target configuration to save
file at several checkpoint.
If LIO target service is configured properly, LIO target
configuration is restored by this service during boot up
a server, but if not, existing in-use volumes would become
inconsistent status after c-vol service starts.
If there is no iSCSI target configuration during
ensure_export, LIO dirver should restore the saved
configuration file to avoid the problem.
Michał Dulko [Fri, 5 Feb 2016 14:41:01 +0000 (15:41 +0100)]
Add SIGHUP handlers to reset RPC version pins
Adding SIGHUP handlers (by implementing reset from oslo.service) to
cinder-scheduler, cinder-backup and cinder-volume that reset cached RPC
version pins. This is to avoid the need to restart all the services when
upgrade of the deployment is completed.
Some changes go a little deep into the stack, because to reload all the
pins we need to recreate <service>.rpcapi.<service>API objects that are
stored in the memory.
Please note that SIGHUP signal is handled by oslo.service only when
service runs in daemon mode (without tty attached). To test this commit
in DevStack you need to add "&" to the end of the command that starts
the service.
Situation is more complicated with the API service, so we're leaving it
with restart required for now. In the deployments with HA cinder-api is
typically behind a load balancer, so restarting individual nodes
one-by-one should be easy.
DocImpact: Add information on rolling upgrades procedures to the docs.
Implements: blueprint rpc-object-compatibility
Gorka Eguileor [Thu, 18 Feb 2016 12:51:40 +0000 (13:51 +0100)]
Rtstool sets wrong exception message on save
Rtstool does not properly set the message on the RtstoolError exception
on the save_to_file method (save operation) because it's passing
formatting arguments as if it were a LOG call instead of formatting
those same arguments with
%.
There are 2 cases where this can happen, when saving to the default
location on a system that has no target.service installed and the
creation of the default directory fails, and when saving the file
actually fails.
This patch properly formats the message before passing it to the
instantiation of RtstoolError exception.
Victor Stinner [Tue, 24 Nov 2015 16:49:21 +0000 (17:49 +0100)]
Test middleware test_faults to Python 3
* XMLDictSerializer: sort dictionary items to get a reliable XML
output. On Python 3, dictionary items are iterated in a random
order, because the hash function is randomized by default.
* Use byte strings for HTTP body
* On Python 3, decode serialized data to get Unicode
* Add a base TestCase class to factorize the _prepare_xml() method
* tests-py3.txt: add cinder.tests.unit.api.middleware.test_faults
Ryan McNair [Sat, 30 Jan 2016 16:24:32 +0000 (16:24 +0000)]
Split out NestedQuotas into a separate driver
Fixes the following issues with NestedQuotas:
* Requires conf setting change to use nested quota driver
* Enforces default child quota value with volume creation
* Disables the use of -1 to be set for child quotas
* Adds an admin only API command which can be used to validate
the current setup for nested quotas, and can update existing
allocated quotas in the DB which have been incorrectly set
by previous use of child limits with -1
There will be follow-up patches with the following improvements:
* make -1 limits functional for child projects
* cache the Keystone project heirarchies to improve efficiency
Note: ideally validation of nested quotas would occur in the setup
of the nested quota driver, but doing the validation requires a
view of ALL projects present in Keystone, so unless we require Keystone
change to allow "cinder" service user to be able to list/get projects,
we need the admin-only API for validation that should be called by
cloud-admin.
Gorka Eguileor [Tue, 16 Feb 2016 18:03:49 +0000 (19:03 +0100)]
Wait for periodic tasks to stop on exit
When a Service in Cinder exits it stops all operations and waits for
them to complete, and it also stops all periodica tasks created with
FixedIntervalLoop, but it doesn't wait until these are completed.
This patch will wait for all periodic tasks that received the stop
request without raising an exception before exiting.
Nate Potter [Mon, 4 Jan 2016 23:10:19 +0000 (23:10 +0000)]
Roll back reservations quota in RPC if necessary
Currently the latest version of the volume rpcapi passes along
old_reservations in retype whereas older versions do not. In the
case where old_reservations aren't passed, they will be checked again
in c-vol. This patch rolls back the quotas that were checked for
old_reservations if the client can't send the latest version in
the RPCAPI so that they aren't reserved twice.
This is an amendment to this recently merged patch:
Iba24edd8ad824837028353b52c90742df55c9173
LisaLi [Wed, 30 Dec 2015 07:03:10 +0000 (15:03 +0800)]
Scaling backup service
Currently the cinder backup service is tightly coupled to the cinder
volume service in ways that prevent scaling out backup services
horizontally across multiple physical nodes.
This patch is to loosen this coupling to enable backup processes
to run on multiple nodes without having to be colocated with volume
services.
The following works are not included in this patch:
1. Remote attach snapshot.
2. Vendor specific work.
3. Remove current backup_volume in driver.
4. Rolling upgrades.
DocImpact
Change-Id: I743e676372703e74178c79683dd622d530981e04
Partial-Implements: bp scalable-backup-service Co-Authored-By: Tom Barron <tpb@dyncloud.net>
Victor Stinner [Mon, 15 Feb 2016 17:27:17 +0000 (18:27 +0100)]
Fix last Python 3 issues in zonemanager
* Replace auth_string.encode("base64", strict") with
oslo_serialization.base64.encode_as_text(auth_string).
* tests-py3.txt: add cinder.tests.unit.zonemanager, add zonemanager
unit tests now pass on Python 3
Victor Stinner [Tue, 9 Feb 2016 13:36:45 +0000 (14:36 +0100)]
Port API v1 and v2 to Python 3
* Replace jsonutils.dumps() with jsonutils.dump_as_bytes() since
output is used for the HTTP body, and HTTP body type is bytes, not
Unicode. On Python 3, jsonutils.dumps() returns Unicode.
* FakeHttplibSocket: replace io.StringIO with io.BytesIO, HTTP body
type is bytes. Encode Unicode to UTF-8.
* Fix FakeHttplibSocket.makefile() API: only the first parameter is
mandatory. On Python 3, it's only called with the first 'mode'
parameter.
* Use bytes strings to test HTTP bodies (JSON or XML).
* Replace dict.values() with list(dict.values()) to get a list on
Python 3.
* Replace error.message with encodeutils.exception_to_unicode(error),
exceptions loose their message attribute in Python 3.
* Update JSON serializer test in test_wsgi.py to use bytes.
* tests-py3.txt: add cinder.tests.unit.api.v1 and
cinder.tests.unit.api.v2
Victor Stinner [Tue, 9 Feb 2016 17:40:21 +0000 (18:40 +0100)]
Port API contribs to Python 3
* Replace dict.iteritems() with dict.items(), dict.iteritems() was
removed in Python 3.
* Replace dict.values() with list(dict.values()) to get a list on
Python 3.
* HTTP body type must be bytes:
- Fix unit tests to use bytes strings for HTTP body
- Encode XML to UTF-8 on Python 3.
* Use "%r" instead of "%s" to format request and response in test to
avoid BytesWarning on Python 3.
* tests-py3.txt: add cinder.tests.unit.api.contrib
Victor Stinner [Mon, 15 Feb 2016 13:43:32 +0000 (14:43 +0100)]
Port test_emc_vnx to Python 3
* Configuration.__getattr__(): replace self.local_conf with
object.__getattribute__(self, 'local_conf') to avoid reentrant call
to __getattr__() in copy.copy(conf) on Python 3.
* test_emc_vnx: Don't compare directly provider_location strings but
set of provider_location items to support hash randomization. On
Python 3, hash randomization is enabled by default and so
dictionary items are rendered in an random order.
* test_emc_vnx: use assertIn() to check if the provider_location
contains 'type^smp' substring. Before, the test failed if the
substring was a the beginning of the string (position 0).
* tests-py3.txt: add cinder.tests.unit.test_emc_vnx
LisaLi [Fri, 15 Jan 2016 08:12:45 +0000 (16:12 +0800)]
Update quota when volume type renames
When customers rename volume type, the corresponding quota_usages
should be changed. Or else quota_usage shows incorrect data.
Meanwhile, it deletes quota_usages whose corresponding volume
types don't exist. These invalid data are left when renaming
volume types in old versions.
LisaLi [Thu, 24 Dec 2015 03:16:26 +0000 (11:16 +0800)]
Add restore_volume_id in backup
This patch is to add restore_volume_id in backup object.
When restoring a volume from a backup, it saves the
volume in backup object.
Currently volume service and backup service are in same host.
When backup service starts, it does cleanup tasks on both
backups and volumes on current host.
But with bp scalable-backup-service, backup service and
volume services can run on different hosts. When doing cleanup
tasks, we need to find out backing-up and restoring volumes
related to the backups on current host. Backing-up volumes can
be found with field backup.volume_id. Restoring volumes are found
by new field backup.restore_volume_id.
Change-Id: I757be7a5e47fc366c181400587b5a61fe3709a0b
Partial-Implements: bp scalable-backup-service Co-Authored-By: Tom Barron <tpb@dyncloud.net>
Tom Barron [Fri, 12 Feb 2016 16:48:16 +0000 (11:48 -0500)]
Fix 'asert' typo in unit test
The dellscapi unit tests contain two occurences of an
apparent typo, 'mock_get_volume_list.asert_called_once_with'.
Because mock will magically create an 'asert_called_once_with'
method, this typo masks a problem with the test_manage_unmanage
test where the wrong set of arguments is expected.
This commit substitutes 'assert' for 'asert' in these occurences
and fixes up the test_manage_unmanage test.
Cory Stone [Mon, 8 Feb 2016 17:22:59 +0000 (11:22 -0600)]
Fix dynamic import of CONF.volume_api_class
Modifies the import to actually happen when API() is called instead of
when the module is loaded.
This is necessary because CONF.volume_api_class is always evaluated as
the default value since the config file hadn't been parsed yet when the
module is loaded.
Nova fixed this problem a while ago for the compute driver in
https://review.openstack.org/#/c/14353/.
Clinton Knight [Sat, 23 Jan 2016 00:02:00 +0000 (19:02 -0500)]
Filter & goodness functions in NetApp drivers
This commit adds a performance module that utilizes various
performance APIs to measure storage controller node utilization
for each pool, and to report those metrics to the Cinder scheduler
via the standard filter & goodness functions. Both Clustered and
7-mode Data ONTAP driver flavors are supported across NFS and
iSCSI/FC protocols.
Javeme [Thu, 11 Feb 2016 12:09:41 +0000 (20:09 +0800)]
Don't use Mock.called_once_with that does not exist
class mock.Mock does not exist method called_once_with, it just exists
method assert_called_once_with. Currently there are still ome places
where we use called_once_with method, this patch let's correct it.
NOTE: called_once_with() does nothing because it's a mock object.
Helen Walsh [Fri, 15 Jan 2016 15:27:11 +0000 (15:27 +0000)]
EMC VMAX - necessary updates for CG changes
Some of the stubs for the Consistency Group functionality
have changed to remove the db object. As a consequence the
VMAX implementation for these operations needs to be
changed.
Eric Harney [Wed, 10 Feb 2016 19:27:49 +0000 (14:27 -0500)]
Profiler: make it possible to run without loading osprofiler
This makes it possible to run Cinder without having
osprofiler installed. This is primarily to make it easier
to debug issues and ensure that osprofiler is not
introducing problems when debugging CI failures.
Note that this requires disabling osprofiler in api-paste.ini
as well.
Code Review / openstack-build / cinder-build.git / log