Xing Yang [Fri, 27 Feb 2015 05:45:09 +0000 (00:45 -0500)]
Correct a few changes in the VMAX driver
The following patch made a few wrong changes in the VMAX driver.
https://review.openstack.org/#/c/145780/
The following two files contain the wrong changes:
https://review.openstack.org/#/c/145780/15/cinder/tests/
test_emc_vmax.py line 604
https://review.openstack.org/#/c/145780/15/cinder/volume/drivers/
emc/emc_vmax_https.py
Mike Perez [Thu, 26 Feb 2015 20:07:22 +0000 (12:07 -0800)]
Update v1 deprecation warnings
As discussed on IRC and mailing lists, we're going to give more time for
deprecation of the v1 API. Since we introduced the deprecation of the v1
API in Juno, we can remove it after EOL of Juno, which will be the
release of Liberty.
Review 145780 broke the lefthand driver. The author and reviewers
did not even bother to look at the 3rd party CI results that clearly
showed that this patch broke the hplefthand driver, due to changing
the imports. The change removed an import to one of the hplefthandclient
modules, which was then later accessed.
Reviewers, please check 3rd party CI when a cinder patch touches a driver.
Authors of patches, if you touch a driver, you need to check the 3rd party
CI failures and make sure your patch changes aren't causing the failures.
Steven Kaufer [Tue, 10 Feb 2015 21:12:16 +0000 (21:12 +0000)]
Replication status periodic task optimization
A periodic task exists to update the replication status for all volumes.
Currently, this task executes for all drivers and always retrieves all
volumes for the current host from the DB.
This patch set:
* Ensures that the periodic task is only activated if the driver actually
supports replication
* Only retrieves volumes from the DB if 'replication_status'!='disabled' in
the periodic task
Also, the driver documentation in cinder.volume.driver.VolumeDriver.
get_volume_stats() is updated to reflect that the 'replication' key indicates
that the driver supports replication; this is the key that was actually
implemented in the drivers that support replication.
nikeshmahalka [Wed, 25 Feb 2015 15:14:13 +0000 (20:44 +0530)]
Use Unique SCST Group names in SCST cinder helper driver.
Currently, while setting up GROUPS under targets in scst.conf,
we are using the Initiator IQN as the group name. When we have
multiple targets and we want to connect LUN's from these multiple
targets to the same initiator, we are using the same GROUP name in
all the Target sections.
It would be good to provide a unique group name by prepending the
GROUP name with the target name. So the GROUP name will be
"Target name+Initiator IQN".
nikeshmahalka [Thu, 19 Feb 2015 12:33:01 +0000 (18:03 +0530)]
Add CHAP persistence to SCST target helper
The SCST target helper currently does not have a mechanism to
persist CHAP records. Added this support so that LUNs will
get re-exported if Cinder service restarts.
Long shot, but only related change in Cinder since this started was this one. It's possible that the config specification on the cmd line does something "different". Let's find out.
Eric Brown [Tue, 24 Feb 2015 07:02:50 +0000 (23:02 -0800)]
Use oslo_config choices support
The oslo_config library added support for a choices keyword argument in
version 1.2.0a3. This commit leverages the use of choices for StrOpts in
Cinder's configuration.
Angela Smith [Tue, 24 Feb 2015 21:04:02 +0000 (13:04 -0800)]
Custom zone name prefix not being used by brcd driver
Config file setting for zone name prefix and activate flag were
not being picked up by the brocade zone driver. Modified the
way the config options are used for each fabric for these config
options.
Steven Kaufer [Mon, 15 Dec 2014 19:10:25 +0000 (19:10 +0000)]
GET volumes API sorting enhancements common utilities
This change is to support updating the v2 /volumes and /volumes/detail
APIs to support multiple sort keys and sort directions using the single
'sort' parameter, see API working group guidelines for syntax and
examples:
https://github.com/openstack/api-wg/blob/master/guidelines/
pagination_filter_sort.rst
Note that the existing 'sort_key' and 'sort_dir' parameters are being
deprecated and they cannot be used with the new 'sort' parameter.
This patch set contains utility functions to:
* Process the input sorting parameters on the request
* Process the sort keys and directions to include the default keys
The main complexity in this change deals with defaulting the sort keys
and directions so that volume order does not change for existing
paths. A new 'process_sort_params' function is created to consistently
process the sort parameters that will be passed from the REST API and
down to the DB API. This utility function will be invoked when the
sort params need to be processed (and defaulted) in the DB sqlalchemy
layer (prior to invoking the common paginate_query function).
These functions will be consumed in the subsequent change set:
https://review.openstack.org/#/c/141915/
The zone manager and the lookup service had some cruft code that
was incorrectly reading the cinder.conf sections it needed.
When cinder.conf was configured to use the Cisco driver, the zone
manager would never see it, because it was reading from the wrong
section of cinder.conf.
Jay S. Bryant [Mon, 23 Feb 2015 23:14:57 +0000 (17:14 -0600)]
Sync scheduler.filters module from oslo-incubator
The scheduler.filters module hasn't been updated since
January of 2014. As a result there are a number of changes
that we should pull into Cinder's copy.
Current HEAD in OSLO:
---------------------
commit e589dde0721a0a67e4030813e582afec6e70d042
Date: Wed Feb 18 03:08:12 2015 +0000
Merge "Have a little fun with release notes"
Changes merged with this patch by file:
__init__.py
- be81d6ba - Cleanup unused log related code
availability_zone_filter.py
- 4a47188e - Allow filters to only run once per request if their data is static
capabilities_filter.py
- 2fbf5065 - Remove oslo.log code and clean up versionutils API
- dacc065a - Merge "Update oslo log messages with translation domains"
- 86707cd5 - Remove None for dict.get()
- fcf517d7 - Update oslo log messages with translation domains
extra_specs_ops.py
- ac17de97 - Use oslo_utils instead of deprecated oslo.utils
- 6ff6b4b4 - Switch oslo-incubator to use oslo.utils and remove old modules
ignore_attempted_hosts_filter.py
- 2fbf5065 - Remove oslo.log code and clean up versionutils API
- 39625e18 - Set pbr 'warnerrors' option for doc build
- dacc065a - Merge "Update oslo log messages with translation domains"
- 86707cd5 - Remove None for dict.get()
- fcf517d7 - Update oslo log messages with translation domains
Tomoki Sekiyama [Mon, 19 Jan 2015 21:34:18 +0000 (16:34 -0500)]
Limit volume copy bandwidth per backend
Currently, by setting volume_copy_bps_limit in cinder.conf,
volume/image copy can be throttled to mitigate slow down of
instances' volume access during the copy. However, this is a global
setting and applied to all the backends.
This change enables admins to configure volume_copy_bps_limit to
different values among backends by specifying it in each backend
section.
In addition, with this change, the bps limit will be divided when
multiple volume copy operations run concurrently on the same backend.
For example, if volume_copy_bps_limit is set to 100MB/s, and 2 copies
are running on a backend, each copy can use up to 50MB/s.
This behavior will be useful for QoS which ensures a certain amount
of bandwidth is kept for instances' volume access.
This introduces Throttle classes to count volume copies in a backend
and setup bandwidth limit.
Steven Kaufer [Thu, 12 Feb 2015 14:45:18 +0000 (14:45 +0000)]
Generic filter support for volume queries
DB functions exist to get all volumes, to get all volumes in a particular
project, to get all volumes in a particular group, and to get all volumes
hosted on a particular host. See the following functions in the DB API:
Only the queries that get all volumes and that get all volumes by project
support additional filtering.
The purpose of this patch set is to make the filtering support consistent
across these APIs, adding it to the volume_get_all_by_group and the
volume_get_all_by_host APIs.
John Griffith [Thu, 19 Feb 2015 23:07:17 +0000 (16:07 -0700)]
Remove warnings for long vgs and lvs calls
We put some warning statements in a while back for
lvs and vgs commands that lasted more than 60 seconds
so we could easily query issues in the gate.
Since then we've made a number of changes to improve our
LVM interactions including the use of an LVM conf file with
a filter for only the VG's Cinder uses.
There's one issue remaining however where during the instance
rescue test in Nova where LVM get's stuck trying to open
devices that no longer exist. Part of this I think is due
to some manipulation that Nova/KVM does on the attached volume
when the test is run, but also the rescue process in Nova
uses LVM volumes as well and does some moving around and mounting
of devices.
The result is that LVM calls can take quite a while
(greater than 100 seconds) to complete during the rescue process.
This doesn't result in any failures, just that the rescue process
slows things down dramatically and is a pretty heavy process.
Also, the newer versions of process utils include completion
timing in the logs so we don't really need this any longer eve
to query timings and get info.
This patch removes those log statements, and proposes we
document somewhere that rescue operations on a setup that
includes c-vol service and nova-compute service on the same
node will temporarily impact LVM performance.
Jay S. Bryant [Fri, 20 Feb 2015 23:12:49 +0000 (17:12 -0600)]
Sync 'versionutils' module from oslo-incubator
The versionutils module hasn't had a sync since November of 2014.
There have been namespace changes and changes to enable moving to
the new oslo_log library. So, we need this sync so that we can
move forward with those changes.
Current HEAD in OSLO:
---------------------
commit e589dde0721a0a67e4030813e582afec6e70d042
Date: Wed Feb 18 03:08:12 2015 +0000
Merge "Have a little fun with release notes"
Changes merged with this patch:
--------------------- 9bf01f9d - Switch from oslo.config to oslo_config 2fbf5065 - Remove oslo.log code and clean up versionutils API
Jay S. Bryant [Fri, 20 Feb 2015 22:56:44 +0000 (16:56 -0600)]
Sync 'threadgroup' from oslo-incubator
The threadgroup module hasn't had a sync since September of 2014.
The module needs to be updated to support the move to using the
oslo_log library. This patch brings us up to the latest module
level.
Current HEAD in OSLO:
---------------------
commit e589dde0721a0a67e4030813e582afec6e70d042
Date: Wed Feb 18 03:08:12 2015 +0000
Merge "Have a little fun with release notes"
Changes merged with this patch:
--------------------- 2fbf5065 - Remove oslo.log code and clean up versionutils API 1523f000 - threadgroup: don't log GreenletExit
Jay S. Bryant [Fri, 20 Feb 2015 22:45:29 +0000 (16:45 -0600)]
Update 'systemd' module from oslo-incubator
This sync is needed as part of the clean up so that
we can move to the new oslo_log library.
Current HEAD in OSLO:
---------------------
commit e589dde0721a0a67e4030813e582afec6e70d042
Date: Wed Feb 18 03:08:12 2015 +0000
Merge "Have a little fun with release notes"
Changes merged with this patch:
--------------------- 2fbf5065 - Remove oslo.log code and clean up versionutils API
Jay S. Bryant [Fri, 20 Feb 2015 22:29:10 +0000 (16:29 -0600)]
Sync 'service' module from oslo-incubator
The service module hasn't had a sync to Cinder since November
of 2014. There have been a number of changes, including updates
to get it using the appropriate namespace for oslo and support
for moving away from using oslo.log. So, we need to update the
module.
Current HEAD in OSLO:
---------------------
commit e589dde0721a0a67e4030813e582afec6e70d042
Date: Wed Feb 18 03:08:12 2015 +0000
Merge "Have a little fun with release notes"
Changes merged with this patch:
--------------------- 2aacb111 - Change oslo.config to oslo_config 2fbf5065 - Remove oslo.log code and clean up versionutils API dbca53e9 - Merge "Added graceful argument on Service.stop method" 442fc223 - Added graceful argument on Service.stop method cf429e50 - Remove extra white space in log message
Jay S. Bryant [Fri, 20 Feb 2015 22:13:36 +0000 (16:13 -0600)]
Sync 'loopingcall' module from oslo-incubator
In order to be able to move to using the new log
library we need to update loopingcall to the latest
version.
Current HEAD in OSLO:
---------------------
commit e589dde0721a0a67e4030813e582afec6e70d042
Date: Wed Feb 18 03:08:12 2015 +0000
Merge "Have a little fun with release notes"
Changes merged with this patch:
--------------------- 2fbf5065 - Remove oslo.log code and clean up versionutils API 5985b35f - Prefer delayed %r formatting over explicit repr use
Jay S. Bryant [Fri, 20 Feb 2015 21:05:56 +0000 (15:05 -0600)]
Sync the 'fileutils' module from oslo-incubator
The fileutils module hasn't been updated since
November of 2014. We need to bring this module up
to date to support the namespace changes that have
been made.
Current HEAD in OSLO:
---------------------
commit e589dde0721a0a67e4030813e582afec6e70d042
Date: Wed Feb 18 03:08:12 2015 +0000
Merge "Have a little fun with release notes"
Changes merged with this patch:
--------------------- ac17de97 - Use oslo_utils instead of deprecated oslo.utils 809080ed - Introduce fileutils ensure_dir creation mode parameter
Jay S. Bryant [Fri, 20 Feb 2015 20:48:46 +0000 (14:48 -0600)]
Sync 'eventlet_backdoor' module from oslo-incubator
The eventlet_backdor module hasn't been updated in Cinder since
September of 2014. In order to be able to move to the oslo.log
library and be able o clean other modules out of oslo-incubator
we need to bring it up to the latest level.
Current HEAD in OSLO:
---------------------
commit e589dde0721a0a67e4030813e582afec6e70d042
Date: Wed Feb 18 03:08:12 2015 +0000
Merge "Have a little fun with release notes"
Changes merged with this patch:
--------------------- 2aacb111 - Change oslo.config to oslo_config 2fbf5065 - Remove oslo.log code and clean up versionutils API 80c47519 - Remove unnecessary import of eventlet a3220c51 - add list_opts to all modules with configuration options 5d40e143 - Remove code that moved to oslo.i18n
Kurt Martin [Fri, 20 Feb 2015 17:19:03 +0000 (09:19 -0800)]
Fixed 3PAR driver load balancing during migration
This patch will not allow the 3PAR iSCSI driver to pick another
iSCSI IP from the hp3par_iscsi_ips list during a nova live-migration.
Nova expects that the IQN will be exactly the same as it's attaching
the volume(s) to the new host during live-migration. This conflicts
with the Cinder settings such as "hp3par_iscsi_ips" which allows for
multiple IPs for the purpose of load balancing.
Alex Meade [Thu, 16 Oct 2014 20:11:32 +0000 (16:11 -0400)]
NetApp E-series: Allow scheduling by disk
This patch allows volume scheduling by disk type via the
netapp_disk_type volume type extra spec and disk encryption via the
netapp_disk_encryption volume type extra spec
When using a Novaclient method on a multi-region infrastructure,
requests sometimes fail with an AmbiguousEndpoints Exception,
because more than one Nova endpoint is returned in the catalog.
This patch passes `region_name` and `endpoint_type` from conf to
Novaclient, so this error case is avoided.
John Griffith [Thu, 19 Feb 2015 23:18:12 +0000 (16:18 -0700)]
Remove retry_deactivation directive on lvremove
A while back an LVM_CONF directive was added to
explicitly retry_deactivation on lvremove. This
was a great idea, but since then the LVM defaults
all seem to set this for us anyway so we don't
really need to send it in the call explicitly
any more.
Also, we've introduced the option to use a cinder
specific lvm.conf file which can be used to set
or unset values like this going forward:
(commit: eb7bb3e08c1b8e1008ba447b842b635821e2097e)
This patch removes the retry_deactivation directive, but
leaves the ignore_suspended_devices setting as we don't
want to use that all the time, but only during recovery.
There may be better options for this call as well but
that's a possible future improvement unrelated to this
commit.
Navneet Singh [Tue, 12 Aug 2014 08:22:39 +0000 (13:52 +0530)]
Manage/unmanage impl for NetApp ONTAP iscsi driver
This patch implements manage and unmanage support for NetApp's
cmode and 7mode iscsi drivers. The input required for manage call
is either source-id or source-name or both.
Joe Cropper [Thu, 19 Feb 2015 05:55:04 +0000 (23:55 -0600)]
Fix some message nits in the ZoneManager
This patch addresses some nit comments I've received on some of the
ZoneManager's conf options (e.g., not documenting the valid zoning
strategies) and some other minor message format items.
Cleaned up some globalization items as well (% => ,).
Also fixed the UTs since they didn't work at all due to duplicate
opt errors based on the UT structure.
Steven Kaufer [Wed, 18 Feb 2015 21:45:57 +0000 (21:45 +0000)]
Implement refresh as kwargs in get_volume_stats
When implementing the base driver "get_volume_stats" function, not all
drivers implemented 'refresh' as a kwarg. This can cause failures for any
code that simply invokes the following (assuming that refresh will default
to False -- which is does for 50+ drivers):
driver.get_volume_stats()
This patch set updates the 7 drivers that did not implement refresh as a
kwarg so that the various driver implementations are consistent.
Tom Swanson [Tue, 17 Feb 2015 20:00:04 +0000 (14:00 -0600)]
Dell sc driver iscsi multipath enhancement
Added support for the connector's multipath boolean. If this is
set the initialize_connection function returns arrays of all the
IQNs, LUNs and portals associated with the mapping of the volume
to the server. If this is not set the standard return of a lone
IQN, LUN and portal is implemented.
Minor change to find_volume. If a volume name or instance isn't
set then it will not be sent as a payload filter to the Dell
Storage Center array.
This patch fixes the error thrown on the loading of HNAS drivers (NFS and
iSCSI). The bug was added by commit 450a35e2. Also, it adds unit tests to cover
exception situations.
Jeegn Chen [Tue, 17 Feb 2015 05:05:26 +0000 (13:05 +0800)]
Fix return value inconsistency in VNX Driver
When iscsi_initiators option for EMC Cinder Driver has no value,
a dict object is returned by find_available_iscsi_targets() in
EMC Cinder Driver while a list is expected. Thus an
initialize_connection() will fail due to the inconsistency.
This patch is to fix this inconsistency in the driver.
Jeegn Chen [Thu, 15 Jan 2015 01:35:09 +0000 (20:35 -0500)]
Pool-aware scheduler support in EMC VNX Cinder driver
Changed EMC VNX driver to report pools information in
update_volume_stats and removed the original pool selection
logic in VNX driver.
Besides, deprecated the VNX driver defined extra spec key
"storagetype:pool", since "pool_name" key is introduced by
the pool-aware scheduler feature to specify which pool to
place the volume.
Code Review / openstack-build / cinder-build.git / log