Adelina Tuvenie [Thu, 27 Aug 2015 09:27:28 +0000 (02:27 -0700)]
Fixes wrong neutron Hyper-V Agent name in constants
Change Id03fb147e11541be309c1cd22ce27e70fadc28b5 moved the
AGENT_TYPE_HYPERV constant from common.constants to
plugins.ml2.drivers.hyperv.constants but change the value of the
constant from 'HyperV agent' to 'hyperv'. This patch changes
the name back to 'HyperV agent'
This implementation may expose a vulnerability where a malicious
user can sieze the opportunity of a time window where a port
may land unaddressed on a shared network, thus allowing him/her
to suck up all the tenant traffic he/she wants....oh the shivers.
Assaf Muller [Wed, 26 Aug 2015 14:07:03 +0000 (10:07 -0400)]
Remove ml2 resource extension success logging
This is the cause of a tremendous amount of logs, for no
perceivable gain. A normal dvr run in the gate shows this debug
message around 120K times, which is way too much.
ajmiller [Tue, 25 Aug 2015 04:04:02 +0000 (21:04 -0700)]
Add optional file permission argument to replace_file()
The replace_file() utility function currently sets the mode of all files
it creates to 0o644. This is not appropriate for all files. This patch
adds an optional "file_mode" argument to the function.
Miguel Angel Ajo [Fri, 28 Aug 2015 05:49:28 +0000 (07:49 +0200)]
Stops patching an object method which could be gone at cleanup
Stop patching the qos plugin 'notification_driver_manager' method
and instead substitute for a mock since it's destroyed and reloaded
on every test run.
Neutron doesn't have a way to test a newly added network node
by deploying test resource before any customer resource on the node
is deployed. Nova and Cinder has the setting of “enable_new_services”
in each conf to disable the initial service status to achieve this.
This proposal adds enable_new_agents config.
Aaron Rosen [Tue, 5 May 2015 21:35:08 +0000 (14:35 -0700)]
Add Geneve type driver support to ML2
More information about Geneve protocol can be found here:
https://tools.ietf.org/pdf/draft-gross-geneve-02.pdf
Following configuration variables were added:
[ml2_type_geneve]
vni_ranges - Comma-separated list of <vni_min>:<vni_max> tuples
enumerating ranges of Geneve VNI IDs that are
available for tenant network allocation
max_header_size - Geneve encapsulation header size is dynamic, this
value is used to calculate the maximum MTU for the driver
this is the sum of the sizes of the outer
ETH + IP + UDP + GENEVE header sizes
Assaf Muller [Wed, 26 Aug 2015 20:27:37 +0000 (16:27 -0400)]
Fix py34 No sql_connection parameter is established error
Tests that were using DB connections that did not happen to
import config.py were not setting the DB connection string.
The base test class now sets the string instead of relying
on an import to happen.
Since Ib65c41fc5f137eedb21fccfcee1e96b6990ae30d removes the local
jenkins slave script copy of subunit2html we must start using the
version packaged in os-testr.
Clark Boylan [Tue, 25 Aug 2015 17:58:57 +0000 (10:58 -0700)]
Run py34 tests with testr
This doesn't use os-testr but it results in html reports built from
the subunit logs.
A note from amuller: tox -e py27 uses ostestr. The primary difference
between testr and ostestr (For my money) is that ostestr spits out
progression. After a conversation with mtreinish (The author of ostestr)
it doesn't seem to be possible to use tox with ostestr for our py34
tests because we use a long regex that is split on newlines. ostestr
supports the --regex flag as such (regex_a|regex_b), however it's not
possible to use that with newlines and to play nice with tox.
Since I think that we do want to use ostestr (Just like the py27 venv),
I'll work with mtreinish to introduce a white list regex file in to
ostestr. The file will be maintained in the repo and passed in to
ostestr via tox.
Carl Baldwin [Tue, 25 Aug 2015 20:51:16 +0000 (20:51 +0000)]
Make a couple of methods private
I was just going over this class trying to understand what methods
really are used outside of the class. I found that these two are not.
I thought I'd submit a quick patch to mark them "private".
Oleg Bondarev [Tue, 18 Aug 2015 09:48:41 +0000 (12:48 +0300)]
Validate router admin_state_up on upgrade to distributed
For proper upgrade of centralized router to distributed the router
needs to be disabled (admin_state_up set to false).
The patch adds corresponding validation.
Brian Haley [Tue, 25 Aug 2015 13:42:12 +0000 (09:42 -0400)]
Fix AttributeError in _clean_updated_sg_member_conntrack_entries()
The conntrack work that recently merged introduced a bug
due to an incorrect 'if' statement, it was only detecting
when one variable was not set instead of both, which can
cause an exception. This is currently causing jenkins failures
with a number of other changes.
Introduced in Change Id Ibfd2d6a11aa970ea9e5009f4c4b858544d8b7463
salvatore [Fri, 21 Aug 2015 08:10:56 +0000 (10:10 +0200)]
Quota enforcement: remove locks on _dirty_tenants
This lock was used to avoid errors due to list contents changing
during iteration, but is causing issues with pymysql. This patch
proposes an alternative approach which makes the use of a lock
unnecessary.
With this change a copy of the dirty_tenants set is made before
setting the dirty bit on resources, and then the mark_dirty routine
operates on this copy. This still guaranteses operations
correctness, as all the tenants that should be marked dirty are
marked dirty before the completion of the relevant API request.
John Davidge [Wed, 24 Jun 2015 13:52:13 +0000 (14:52 +0100)]
L3 agent changes and reference implementation for IPv6 PD
This patch adds the common framework to be used by specific
implementations of the DHCPv6 protocol for Prefix Delegation.
It also includes a reference implementation based on the Dibbler
DHCPv6 client. Dibbler version 1.0.1 or greater is required.
Sanity tests are included to verify the installed version.
A patch for admin/user documentation is up for review here:
https://review.openstack.org/#/c/178739
Video guides for configuring and using this feature are available on
YouTube:
the argument is ignored and all whitelisted tests are executed.
This is not in line with the other testenv's. This patch ensures
that posargs are processed if available, and that we fall back on
the lot of tests when not specified.
Miguel Lavalle [Sun, 12 Jul 2015 23:00:50 +0000 (18:00 -0500)]
Add dns_label processing for Ports
Functionallity is added to enable users to specify a dns_label field during
port creation and update. This dns_label field will be used for DNS resolution
of the hostname in dnsmasq and also will be used when Neutron can integrate
with external DNS systems.
Cedric Brandily [Fri, 21 Aug 2015 20:48:42 +0000 (22:48 +0200)]
Move in-tree vendor AGENT_TYPE_* constants
AGENT_TYPE_* constants[1] define all agent types BUT vendor ones are only
used by in-tree vendor code. This changes moves in-tree AGENT_TYPE_*
constants[2] to vendor modules to ensure they will be removed from neutron
code on decomposition.
[1] in neutron.common.constants
[2] AGENT_TYPE_HYPERV/MLNX/SDNVE
Ihar Hrachyshka [Mon, 24 Aug 2015 17:29:46 +0000 (19:29 +0200)]
devref: added guidelines on how to maintain sub-projects
I was involved lately in several boring attempts to fix broken
sub-project requirements and stable branches, and I think part of the
problem here is that we don't communicate our expectations to
sub-projects clear enough.
This is a first attempt to set brief and clear guidelines to sub-project
maintainers on how to maintain their repositories without much hassle.
Matthew Treinish [Mon, 24 Aug 2015 17:28:22 +0000 (13:28 -0400)]
Stop logging STDOUT and STDERR on every shell out
Sometimes you can log too much. For example, logging a complete
iptables dump on every security group operation, OMG TMI. Doing this
during DSVM run results in a log file >7M compressed. To mitigate this
issue this commit switches the execute method to only log the command
and it's exit code on the success case. If there is a failure the
entire stdin, stdout and stderr are logged.
Ryan Moats [Mon, 24 Aug 2015 13:49:09 +0000 (08:49 -0500)]
Remove redundant logging statements from RootWrapDaemonHelper
create_process and execute_rootwrap_daemon both current log
the command they are about to run. Remove these statements as
redundant (the log message showing the command's result includes
the command itself)
Signed-off-by: Ryan Moats <rmoats@us.ibm.com>
Change-Id: I8bdea7212f8a32a3b6b0b47c5b824ac1c561d83f
Ryan Moats [Fri, 21 Aug 2015 14:16:52 +0000 (09:16 -0500)]
Rationalize neutron logs to help in troubleshooting router issues
Currently the neutron logs are not very useful for troubleshooting
router issues - this patch adds additional logging statements to
help the triage process.
Change-Id: I014e0119205d4a947a1be142aeeb29940c4de3bd Signed-off-by: Ryan Moats <rmoats@us.ibm.com>
Oleg Bondarev [Mon, 24 Aug 2015 08:29:25 +0000 (11:29 +0300)]
Move db agent schedulers test to a more appropriate place
Current placing is confusing as in fact the tests have little to do
with ml2 and openvswitch.
This was triggered by discussion on https://review.openstack.org/199514
Next step should be to separate dhcp and l3 schedulers tests.
Code Review / openstack-build / neutron-build.git / log