The VolumeLimitExceeded exception contains the wrong limit when
the number of volumes exceeds the quota corresponding to a volume
type. It always contains the limit of quota 'volumes'. This patch
fixes the limit in both exception and log message. It also adds
the quota name to exception and log message for better clarity.
Lin Yang [Mon, 3 Aug 2015 07:28:15 +0000 (15:28 +0800)]
Fix status comparison for attached volume backup
1) When do backup for an attached volume, its previous_status should be
'in-use' instead of 'in_use'.
2) Added more assertions in corresponding unittest case for this function
to make sure it enter this if-block. Previous test case was passed even
with the incorrect status.
John Griffith [Thu, 30 Jul 2015 17:43:00 +0000 (11:43 -0600)]
Use prefix for SolidFire template account
The SolidFire template account was not using the
account_prefix setting when the account was created.
This means that if a deployment is configured to use
the prefix, that calls to make the actual clone will fail
because the clone routine prepends the prefix from the
config settings on every lookup.
This patch just adds the same account adjustment that
we use in our regular account creation routines.
Transient DB errors should not kill the thread for FixedIntervalLoopingCall.
This was noticed and fixed for the DBError case in Bug#1466991, but the
exception from sqlalchemy is not handled. Basically, self.model_disconnected
should be set to True, but the looping thread should carry on regardless of
the error.
The VMDK driver reports the protocol as 'LSI Logic SCSI' in
backend stats. This patch changes the protocol to 'vmdk'
which is in sync with driver support matrix at:
https://wiki.openstack.org/wiki/CinderSupportMatrix
It might happen that multiple cinder nodes/backends are trying to add
volumes to the same target. In this situation, the driver can get an
error trying to add a volume to a hlun just taken by other instance.
This patch fix this avoiding concurrency using mutual exclusion and adds
retries to the failed attempts to cover scenarios where multiple cinder
hosts are used.
When getting the default quota value for a project, the DBQuotaDriver
is just checking if the default_quota_class CONF is set to True.
But this conf should not be considered when getting default quota
values for subprojects.
Previously, when we asked for the default quota values of a
subproject, the default quota values of the root project was returned.
Extending a linear LVM volume that has a snapshot requires
that the LV be deactivated explicitly prior to extending.
This adds a deactivate_lv method and calls it prior to
issuing the extend call. If auto_activation_volume_list
is not defined lvm.conf, then volumes will be reactivated
automatically after the extend. If auto_activation_volume_list
is defined, then volumes that should be automatically
reactivated should be added to the auto_activation_volume_list
or they won't be activated automatically.
NOTE: This doesn't apply to thin provisioned LVs as they don't
require the deactivation step.
DocImpact: When a user extends LVM Volumes with a snapshot, the
volumes will be deactivated. Their re-activation is automatic,
unless auto_activation_volume_list is defined in lvm.conf.
See lvm.conf for more info. Thin provisioned LVM Volumes
will not be deactivated as they don't require it.
Co-Authored-By: John Griffith <john.griffith8@gmail.com>
Change-Id: If746625cfe658c3528525dc7f4bf869f1c9704dc
Closes-Bug: #1470558
Fix exception on uploading a volume to image with glance v2 API
This fixes an exception on uploading a volume to image when
the glance v2 api is enabled. Also, this adds the unit tests
for updating metadata and data both with glance API v1 and v2.
The Nimble driver does not set the VERSION variable
causing its version to be logged as N/A. This patch
updates that variable so that the correct version
number is reflected in the log.
Eric Harney [Mon, 27 Jul 2015 17:24:36 +0000 (13:24 -0400)]
Log which service is down
This changes the message "Manager for service cinder-volume
is reporting problems..." to
"Manager for service cinder-volume myhost@backend1 is
reporting problems..."
This makes it more clear in the log file which backend this
message is referring to.
The update_migrated_volume() function on volume/manager.py
calls the update_migrated_volume() from the driver. If the
driver does not implement the function, the manager falls
back (by catching the NotImplementedError exception) and
implements a default behavior, not renaming the volume. If
the driver does not have the function implemented, the
migration will fail as in this case, an AttributeError
exception can be raised.
We fix this by implementing the method
update_migrate_volume() in the BaseVD driver so all drivers
now throw the proper exception.
Jon Bernard [Thu, 23 Jul 2015 17:47:03 +0000 (13:47 -0400)]
RBD: use user-configured value for max_clone_depth
This patch allows the user to override the default max-clone-depth in
cinder.conf. Without this, the driver will ignore the user setting and
always use the default.
Tom Barron [Sat, 25 Jul 2015 21:11:29 +0000 (17:11 -0400)]
Fix cleanup_temp_volume_snapshots for missing vol
The cleanup_temp_volume_snapshots method raises an exception that
causes the backup service to exit if there is a backup without a
corresponding volume.
This commit catches these exceptions so that the backup service is
not prevented from starting in this circumstance.
This change helps create cinder volumes on a GPFS cluster,
when the cinder services are not running directly on one of
the GPFS nodes.
The NFS export created on GPFS cluster will be locally mounted
on a node running the cinder service. The cinder volume service
will communicate with GPFS nodes over SSH to execute CLIs remotely.
This change also ports the GPFSDriver to ABC driver model.
Implements : blueprint ibm-gpfs-nfs-support
DocImpact
Needs an update in gpfs driver documentation, as this patch
adds an NFS based access for GPFS cinder driver.
Mike Perez [Mon, 27 Jul 2015 05:46:17 +0000 (22:46 -0700)]
Remove deprecated SimpleScheduler
This has been deprecated for three releases now. It's time! By default
it was already having Cinder use the FilterScheduler with certain
weighers and filters to continue the chance behavior, so definitely not
scary!
Shay Halsband [Mon, 8 Jun 2015 16:08:46 +0000 (19:08 +0300)]
XtremIO support for iscsi discovery auth
- Discover existing Initiator Groups (a grouping object for initiators)
from connection information.
- add unit tests for better code coverage.
- handle 'system is busy' array error.
If a non existing volume is deleted the NetApp
iSCSI eseries driver throws a KeyError Exception
in the delete_volume method.
This situation can occur if the user manually deletes
a LUN in the NetApp controller directly or if the
delete operation initiated via cinder is interrupted,
which leaves the system in an inconsistent state.
For example if the volume is deleted on the NetApp
controller but still residing in the OpenStack database.
Michal Dulko [Tue, 21 Jul 2015 10:30:56 +0000 (12:30 +0200)]
Refactoring of manager's create_volume flow
This commit resolves a TODO item (bulk metadata create), rephrases
some comments and makes use of new TaskFlow functionality to save
results of revert command to make decisions in c-vol manager instead
of doing an ugly workaround by injecting the information into exception
raised.
Michal Dulko [Thu, 9 Jul 2015 07:05:10 +0000 (09:05 +0200)]
Remove unused arguments from c-vol's create_volume
Arguments snapshot_id, image_id, source_volid, source_replicaid,
consistencygroup_id and cgsnapshot_id in volume.rpcapi.create_volume
RPC method are duplicated either in request_spec dictionary passed as
one of the arguments or are saved into the databased and are retrieved
by flow processing the request.
To simplify the flow this commit removes these duplicated parameters
and adapts rest of the code to use occurrences that are already there.
Edwin Wang [Mon, 20 Jul 2015 12:25:25 +0000 (20:25 +0800)]
Add I/T mapping check for IBM FlashSystem
No initiator_target_map within properties is needed if no more I/T
connection. Otherwise the FCZone manager will remove the zoning
between I/T. This patch is to add host check in terminate_connection.
If no I/T exists, host will be removed in _unmap_vdisk_from_host.
Remove simple scheduler which is deprecated since Juno
Chance and Simple scheduler functionality can be archived using
FilterScheduler, config details is described here:
http://docs.openstack.org/developer/cinder/api/cinder.scheduler.simple.html
The implementation has been deprecated in Juno,so we can remove
it safely now.
Code Review / openstack-build / cinder-build.git / log