Aaron Rosen [Tue, 14 May 2013 04:02:00 +0000 (21:02 -0700)]
Add missing unit test for NVP metadata_mode option
Note: I didn't squash this change in my patch that made the default
transport type configurable because this change was not in grizzly
and we do not want to backport it.
Aaron Rosen [Mon, 13 May 2013 00:25:04 +0000 (17:25 -0700)]
Allow ports to be created on networks that do not exist in NVP
If a network exists in the quantum database but not in NVP we should allow
someone to create a port on this network and set the status to ERROR. The
reason for this is if one deletes a network from NVP and when the dhcp agent
goes to create it's dhcp port on this network an error will be raised to the
agent and it will enter a constant state of resyncing.
This patch also adds a unit test for update_port() for the same situation.
Irena Berezovsky [Mon, 11 Mar 2013 10:10:15 +0000 (12:10 +0200)]
blueprint mellanox-quantum-plugin
Implements Mellanox Quantum plugin.
This plugin implements Quantum v2 APIs with support for Mellanox embedded
switch functionality as part of the VPI (Ethernet/InfiniBand) HCA.
Add ability for core plugin to implement advanced services
implements blueprint api-core-for-services
Add check for supported_extension_aliases in QuantumManager.
If core plugin supports certain service extension, then core plugin is
stored in service_plugins for the service type of this extension
so corresponding extension could set it as a controller for REST calls.
Do not require sudo/rootwrap to check for dnsmasq version
The dnsmasq version check does not need root privileges
to run as with low privs it works just fine. As a side
effect, the use of the rootwrapper was causing unit tests
to hung because the execute call in check_version was not
being stubbed out. Weirdly enough this wasn't caught in
a previous Gerrit run; there must be a passwordless sudo
lurking around somewhere in the Gerrit infrastructure.
Henry Gessau [Thu, 9 May 2013 04:28:39 +0000 (00:28 -0400)]
Create a common function for method _parse_network_vlan_ranges used
by plugins.
The _parse_network_vlan_ranges method does the same thing for the
linuxbridge, ovs, and hyperv plugins. Create a common function for
the plugins to use instead. This paves the way for improving vlan
range verification (see #1169266) in one place.
For the most part, the dhcp agent uses the root_helper setting from the [AGENT]
section of /etc/quantum/quantum.conf. However, in a couple of spots, the
root_helper setting from the [DEFAULT] section of /etc/quantum/dhcp_agent.ini
was being used.
Roman Podolyaka [Wed, 8 May 2013 15:34:51 +0000 (18:34 +0300)]
Fix usage of SQLAlchemy Query.first() method
Query.first() doesn't raise the NoResultFound exception
if no result is found but rather returns None, so wrapping
of Query.first() call into a try/except NoResultFound block
is useless.
Roman Podolyaka [Tue, 7 May 2013 18:57:53 +0000 (21:57 +0300)]
Fix usage of NexusPortBindingNotFound exception
Currently the required keyword argument (port_id)
is not passed when the exception is raised. In fact
this exception has never been raised before due to
another bug (1173131) so this change also has to
ensure it doesn't break any existing code using
functions which can possibly raise this exception.
Log a warning if dnsmasq version is below the minimum required
It has been noted that older versions of dnsmasq may have unexpected
behavior, so this patch introduces a check on dnsmasq version; if
the minimum version is not met, a warning is logged. This is less
invasive than raising an Exception and abort the dhcp agent, even
though this also seems like a perfectly acceptable behavior.
Brian Haley [Tue, 7 May 2013 15:06:29 +0000 (11:06 -0400)]
Change Daemon class to better match process command lines.
Add additional uuid argument Daemon class to help it better
match output from /proc/$id/cmdline to the correct daemon.
If there is a stale pid in the pidfile, and that process has
the same name, then it could match accidentally and not
start the daemon up properly.
Changed return values for some ensure_* functions to make them more consistent.
Now all ensure_* functions return None on failure and return the entity that was
created within the function when successful. Made changes to the unit tests to
reflect the changed return values.
Thierry Carrez [Mon, 6 May 2013 15:02:39 +0000 (17:02 +0200)]
Import recent rootwrap features in local rootwrap
Import features developed in oslo-rootwrap during the Grizzly cycle (and
recently in havana) into quantum-rootwrap. This is the first step toward
using the common oslo-rootwrap into Quantum: the goal being to make both
implementations converge, we should avoid making local changes (and push
any required change into oslo-rootwrap instead from now on).
New features include:
- Optional logging (use_syslog)
- Searching for executables in a specified binary path (exec_dirs)
- New path-based PathFilter
Those features required a refactoring in the way executables are matched
and in configuration loading.
Aaron Rosen [Tue, 7 May 2013 03:21:57 +0000 (20:21 -0700)]
Fix 500 raised on disassociate_floatingips when out of sync
If one deletes NAT rules directly from NVP and not through quantum,
an error will be raised when deleting a port that is associated with
the floating ip. This patch catches the NotFound exception and logs
it so that the port can successfully be deleted.
get_security_groups now creates default security group
If one called get_security_groups() previously the default security
group would not be created until the tenant created a network. This
exposed a bug when an admin creates a shared network and a tenant tried
to boot a vm on it without having any networks.
Log msg for load policy file only if the file is actually loaded
The Load entry was previousy in init(), whereas it should have
been in _set_rules() which is invoked only when policies are
(re)loaded from the json file.
Previously the NVP plugin would query NVP for the quantum port id that was
stored in the port as a tag in NVP. Later, a look up table was added in order
to directly look up the ID without having to go to NVP. The problem that can
arise is that if a port was created in folsom before this lookup table was
added and then deleted from NVP directly an error will be raised when calling
update_port(). This patch fixes this potential problem.
Dane LeBlanc [Wed, 10 Apr 2013 22:23:37 +0000 (18:23 -0400)]
blueprint cisco-plugin-exception-handling
Improvements to exception handling in the Cisco plugins. Changes
include:
- Added mapping of Cisco exceptions to HTTP codes
(extension to FAULT_MAP).
- Removed several unused Cisco exception definitions.
- Added several new Cisco exceptions for fault conditions.
- Added several rollbacks for various sequential operations, e.g.:
* Create port: Nexus sub-plugin fails after OVS sub-plugin success
* Create port: Nexus switch conig fails after adding binding to
Nexus binding database
* Delete port: OVS sub-plugin fails after Nexus sub-plugin success
- Delete Port: Reversed order of OVS/Nexus sub-plugin calls so that
it is done in the reverse order as is done for create port.
- Removed several empty except/raise blocks
- Delete network: Removed call to Nexus sub-plugin delete_network,
since that is a no-op.
- Removed a block of unused code in model's create_network method.
- Added several unit testcases, including patching of OVS, Cisco
and Nexus config.
- Remove CISCO_TEST configuration from cisco plugin
config .ini file.
Instead of loading security group associations with a separate query
each time a port is loaded from the database, perform the load operation
with a join using a joined sqlalchemy relationship.
Also, this patch removes the need for invoking the mixin method
'extend_port_dict_security_group' from the plugin code.
Roman Podolyaka [Fri, 26 Apr 2013 15:27:39 +0000 (18:27 +0300)]
Fix usage of Query.all() and NoResultFound
SQLAlchemy Query.all() method doesn't raise NoResultFound
exception in case if no result is found but rather returns
an empty list. So this pattern which is common for our code
doesn't make sense and should be fixed:
Mark McLoughlin [Thu, 2 May 2013 09:31:16 +0000 (10:31 +0100)]
Copy the RHEL6 eventlet workaround from Oslo
Tests in oslo-incubator now need the horrendous hack to workaround an
issue with eventlet on RHEL6. We've moved the patch_tox_venv tool
and redhat-eventlet.patch into oslo-incubator, so add them to
openstack-common.conf.
Aaron Rosen [Thu, 2 May 2013 00:12:11 +0000 (17:12 -0700)]
Allow admin to delete default security groups
Previously there was no way to delete a default security groups which
isn't ideal if you want to clean up after deleting a tenant. This patch
allows default security groups to be deleted by the admin.
Code Review / openstack-build / neutron-build.git / log