Removing extra file in Nexus Driver

diff --git a/quantum/plugins/cisco/nexus/nxosapi.py b/quantum/plugins/cisco/nexus/nxosapi.py
deleted file mode 100644 (file)
index 0f0ebe0..0000000
--- a/quantum/plugins/cisco/nexus/nxosapi.py
+++ /dev/null
@@ -1,172 +0,0 @@
-# vim: tabstop=4 shiftwidth=4 softtabstop=4
-# Copyright 2011 Cisco Systems Inc.
-# All Rights Reserved.
-#
-#    Licensed under the Apache License, Version 2.0 (the "License"); you may
-#    not use this file except in compliance with the License. You may obtain
-#    a copy of the License at
-#
-#         http://www.apache.org/licenses/LICENSE-2.0
-#
-#    Unless required by applicable law or agreed to in writing, software
-#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#    License for the specific language governing permissions and limitations
-#    under the License.
-# @author: Debojyoti Dutta, Cisco Systems, Inc.
-
-import sys
-import os
-import warnings
-warnings.simplefilter("ignore", DeprecationWarning)
-from ncclient import manager
-from ncclient import NCClientError
-from ncclient.transport.errors import *
-
-exec_conf_prefix = """
-      <config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
-        <configure xmlns="http://www.cisco.com/nxos:1.0:vlan_mgr_cli">
-          <__XML__MODE__exec_configure>
-"""
-
-
-exec_conf_postfix = """
-          </__XML__MODE__exec_configure>
-        </configure>
-      </config>
-"""
-
-
-cmd_vlan_conf_snippet = """
-            <vlan>
-              <vlan-id-create-delete>
-                <__XML__PARAM_value>%s</__XML__PARAM_value>
-                <__XML__MODE_vlan>
-                  <name>
-                    <vlan-name>%s</vlan-name>
-                  </name>
-                  <state>
-                    <vstate>active</vstate>
-                  </state>
-                  <no>
-                    <shutdown/>
-                  </no>
-                </__XML__MODE_vlan>
-              </vlan-id-create-delete>
-            </vlan>
-"""
-
-cmd_no_vlan_conf_snippet = """
-          <no>
-          <vlan>
-            <vlan-id-create-delete>
-              <__XML__PARAM_value>%s</__XML__PARAM_value>
-            </vlan-id-create-delete>
-          </vlan>
-          </no>
-"""
-
-cmd_vlan_int_snippet = """
-          <interface>
-            <ethernet>
-              <interface>%s</interface>
-              <__XML__MODE_if-ethernet-switch>
-                <switchport></switchport>
-                <switchport>
-                  <trunk>
-                    <allowed>
-                      <vlan>
-                        <__XML__BLK_Cmd_switchport_trunk_allowed_allow-vlans>
-                          <allow-vlans>%s</allow-vlans>
-                        </__XML__BLK_Cmd_switchport_trunk_allowed_allow-vlans>
-                      </vlan>
-                    </allowed>
-                  </trunk>
-                </switchport>
-              </__XML__MODE_if-ethernet-switch>
-            </ethernet>
-          </interface>
-"""
-
-
-cmd_no_vlan_int_snippet = """
-          <interface>
-            <ethernet>
-              <interface>%s</interface>
-              <__XML__MODE_if-ethernet-switch>
-                <switchport></switchport>
-                <no>
-                <switchport>
-                  <trunk>
-                    <allowed>
-                      <vlan>
-                        <__XML__BLK_Cmd_switchport_trunk_allowed_allow-vlans>
-                          <allow-vlans>%s</allow-vlans>
-                        </__XML__BLK_Cmd_switchport_trunk_allowed_allow-vlans>
-                      </vlan>
-                    </allowed>
-                  </trunk>
-                </switchport>
-               </no>
-              </__XML__MODE_if-ethernet-switch>
-            </ethernet>
-          </interface>
-"""
-
-
-filter_show_vlan_brief_snippet = """
-      <show xmlns="http://www.cisco.com/nxos:1.0:vlan_mgr_cli">
-        <vlan>
-          <brief/>
-        </vlan>
-      </show> """
-
-
-def nxos_connect(host, port, user, password):
-    try:
-        m = manager.connect(host=host, port=port, username=user,
-                             password=password)
-        return m
-    except SSHUnknownHostError:
-        sys.stderr.write('SSH unknown host error\n')
-        exit()
-
-
-def enable_vlan(mgr, vlanid, vlanname):
-    confstr = cmd_vlan_conf_snippet % (vlanid, vlanname)
-    confstr = exec_conf_prefix + confstr + exec_conf_postfix
-    mgr.edit_config(target='running', config=confstr)
-
-
-def disable_vlan(mgr, vlanid):
-    confstr = cmd_no_vlan_conf_snippet % vlanid
-    confstr = exec_conf_prefix + confstr + exec_conf_postfix
-    mgr.edit_config(target='running', config=confstr)
-
-
-def enable_vlan_on_trunk_int(mgr, interface, vlanid):
-    confstr = cmd_vlan_int_snippet % (interface, vlanid)
-    confstr = exec_conf_prefix + confstr + exec_conf_postfix
-    print confstr
-    mgr.edit_config(target='running', config=confstr)
-
-
-def disable_vlan_on_trunk_int(mgr, interface, vlanid):
-    confstr = cmd_no_vlan_int_snippet % (interface, vlanid)
-    confstr = exec_conf_prefix + confstr + exec_conf_postfix
-    print confstr
-    mgr.edit_config(target='running', config=confstr)
-
-
-def test_nxos_api(host, user, password):
-    with nxos_connect(host, port=22, user=user, password=password) as m:
-        enable_vlan(m, '100', 'ccn1')
-        enable_vlan_on_trunk_int(m, '2/1', '100')
-        disable_vlan_on_trunk_int(m, '2/1', '100')
-        disable_vlan(m, '100')
-        result = m.get(("subtree", filter_show_vlan_brief_snippet))
-        #print result
-
-
-if __name__ == '__main__':
-    test_nxos_api(sys.argv[1], sys.argv[2], sys.argv[3])