+++ /dev/null
-[ml2_cisco]
-
-# (StrOpt) A short prefix to prepend to the VLAN number when creating a
-# VLAN interface. For example, if an interface is being created for
-# VLAN 2001 it will be named 'q-2001' using the default prefix.
-# The total length allowed for the prefix name and VLAN is 32 characters,
-# the prefix will be truncated if the total length is greater than 32.
-#
-# vlan_name_prefix = q-
-# Example: vlan_name_prefix = vnet-
-
-# (BoolOpt) A flag to enable round robin scheduling of routers for SVI.
-# svi_round_robin = False
-
-#
-# (StrOpt) The name of the physical_network managed via the Cisco Nexus Switch.
-# This string value must be present in the ml2_conf.ini network_vlan_ranges
-# variable.
-#
-# managed_physical_network =
-# Example: managed_physical_network = physnet1
-
-# Cisco Nexus Switch configurations.
-# Each switch to be managed by Openstack Neutron must be configured here.
-#
-# Cisco Nexus Switch Format.
-# [ml2_mech_cisco_nexus:<IP address of switch>]
-# <hostname>=<intf_type:port> (1)
-# ssh_port=<ssh port> (2)
-# username=<credential username> (3)
-# password=<credential password> (4)
-# nve_src_intf=<loopback number> (5)
-# physnet=<physical network> (6)
-#
-# (1) For each host connected to a port on the switch, specify the hostname
-# and the Nexus physical port (interface) it is connected to.
-# Valid intf_type's are 'ethernet' and 'port-channel'.
-# The default setting for <intf_type:> is 'ethernet' and need not be
-# added to this setting.
-# (2) The TCP port for connecting via SSH to manage the switch. This is
-# port number 22 unless the switch has been configured otherwise.
-# (3) The username for logging into the switch to manage it.
-# (4) The password for logging into the switch to manage it.
-# (5) Only valid if VXLAN overlay is configured and vxlan_global_config is
-# set to True.
-# The NVE source interface is a loopback interface that is configured on
-# the switch with valid /32 IP address. This /32 IP address must be known
-# by the transient devices in the transport network and the remote VTEPs.
-# This is accomplished by advertising it through a dynamic routing protocol
-# in the transport network. (NB: If no nve_src_intf is defined then a
-# default setting of 0 (creates "loopback0") will be used.)
-# (6) Only valid if VXLAN overlay is configured.
-# The physical network name defined in the network_vlan_ranges variable
-# (defined under the ml2_type_vlan section) that this switch is controlling.
-# The configured 'physnet' is the physical network domain that is connected
-# to this switch. The vlan ranges defined in network_vlan_ranges for a
-# a physical network are allocated dynamically and are unique per physical
-# network. These dynamic vlans may be reused across physical networks.
-#
-# Example:
-# [ml2_mech_cisco_nexus:1.1.1.1]
-# compute1=1/1
-# compute2=ethernet:1/2
-# compute3=port-channel:1
-# ssh_port=22
-# username=admin
-# password=mySecretPassword
-# nve_src_intf=1
-# physnet=physnet1
-
-# (StrOpt) A short prefix to prepend to the VLAN number when creating a
-# provider VLAN interface. For example, if an interface is being created
-# for provider VLAN 3003 it will be named 'p-3003' using the default prefix.
-# The total length allowed for the prefix name and VLAN is 32 characters,
-# the prefix will be truncated if the total length is greater than 32.
-#
-# provider_vlan_name_prefix = p-
-# Example: provider_vlan_name_prefix = PV-
-
-# (BoolOpt) A flag indicating whether OpenStack networking should manage the
-# creation and removal of VLANs for provider networks on the Nexus
-# switches. If the flag is set to False then OpenStack will not create or
-# remove VLANs for provider networks, and the administrator needs to
-# manage these interfaces manually or by external orchestration.
-#
-# provider_vlan_auto_create = True
-
-# (BoolOpt) A flag indicating whether OpenStack networking should manage
-# the adding and removing of provider VLANs from trunk ports on the Nexus
-# switches. If the flag is set to False then OpenStack will not add or
-# remove provider VLANs from trunk ports, and the administrator needs to
-# manage these operations manually or by external orchestration.
-#
-# provider_vlan_auto_trunk = True
-
-# (BoolOpt) A flag indicating whether OpenStack networking should manage the
-# creating and removing of the Nexus switch VXLAN global settings of 'feature
-# nv overlay', 'feature vn-segment-vlan-based', 'interface nve 1' and the NVE
-# subcommand 'source-interface loopback #'. If the flag is set to False
-# (default) then OpenStack will not add or remove these VXLAN settings, and
-# the administrator needs to manage these operations manually or by external
-# orchestration.
-#
-# vxlan_global_config = True
-
-# (BoolOpt) To make Nexus device persistent by running the Nexus
-# CLI 'copy run start' after applying successful configurations.
-# (default) This flag defaults to False keep consistent with
-# existing functionality.
-#
-# persistent_switch_config = False
-
-# (IntOpt) Time interval to check the state of the Nexus device.
-# (default) This value defaults to 0 seconds which disables this
-# functionality. When enabled, 30 seconds is suggested.
-#
-# switch_heartbeat_time = 0
-
-# (IntOpt) Number of times to attempt config replay with switch.
-# This variable depends on switch_heartbeat_time being enabled.
-# (default) This value defaults to 3
-#
-# switch_replay_count = 3
-
-[ml2_type_nexus_vxlan]
-# (ListOpt) Comma-separated list of <vni_min>:<vni_max> tuples enumerating
-# ranges of VXLAN Network IDs that are available for tenant network allocation.
-#
-# vni_ranges =
-# Example: 100:1000,2000:6000
-#
-# (ListOpt) Multicast groups for the VXLAN interface. When configured, will
-# enable sending all broadcast traffic to this multicast group. Comma separated
-# list of min:max ranges of multicast IP's.
-# NOTE: must be a valid multicast IP, invalid IP's will be discarded
-#
-# mcast_ranges =
-# Example: mcast_ranges = 224.0.0.1:224.0.0.3,224.0.1.1:224.0.1.
-
-[ml2_cisco_ucsm]
-
-# Cisco UCS Manager IP address
-# ucsm_ip=1.1.1.1
-
-# Username to connect to UCS Manager
-# ucsm_username=user
-
-# Password to connect to UCS Manager
-# ucsm_password=password
-
-# SR-IOV and VM-FEX vendors supported by this plugin
-# xxxx:yyyy represents vendor_id:product_id
-# supported_pci_devs = ['2222:3333', '4444:5555']
-
-# Hostname to Service profile mapping for UCS Manager
-# controlled compute hosts
-# ucsm_host_list=Hostname1:Serviceprofile1, Hostname2:Serviceprofile2
'cisco_ml2_nexus_nve',
'ml2_nexus_vxlan_allocations',
'ml2_nexus_vxlan_mcast_groups',
+ 'ml2_ucsm_port_profiles',
# VMware-NSX models moved to openstack/vmware-nsx
'tz_network_bindings',
'neutron_nsx_network_mappings',
from neutron.plugins.cisco.db import network_models_v2 # noqa
from neutron.plugins.ml2.drivers.brocade.db import ( # noqa
models as ml2_brocade_models)
-from neutron.plugins.ml2.drivers.cisco.ucsm import ucsm_model # noqa
from neutron.plugins.ml2.drivers import type_flat # noqa
from neutron.plugins.ml2.drivers import type_gre # noqa
from neutron.plugins.ml2.drivers import type_vlan # noqa
+++ /dev/null
-# Copyright 2015 Cisco Systems, Inc.
-# All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
-
-from networking_cisco.plugins.ml2.drivers.cisco.ucsm import constants as const
-from networking_cisco.plugins.ml2.drivers.cisco.ucsm import ucsm_db
-from networking_cisco.plugins.ml2.drivers.cisco.ucsm import ucsm_network_driver
-
-from oslo_log import log as logging
-
-from neutron.common import constants
-from neutron.extensions import portbindings
-from neutron.i18n import _LE, _LW
-from neutron.plugins.common import constants as p_const
-from neutron.plugins.ml2 import driver_api as api
-
-LOG = logging.getLogger(__name__)
-
-
-class CiscoUcsmMechanismDriver(api.MechanismDriver):
-
- """ML2 Mechanism Driver for Cisco UCS Manager."""
-
- def initialize(self):
- self.vif_type = portbindings.VIF_TYPE_802_QBH
- self.vif_details = {portbindings.CAP_PORT_FILTER: False}
- self.driver = ucsm_network_driver.CiscoUcsmDriver()
- self.ucsm_db = ucsm_db.UcsmDbModel()
-
- def _get_vlanid(self, context):
- """Returns vlan_id associated with a bound VLAN segment."""
- segment = context.bottom_bound_segment
- if segment and self.check_segment(segment):
- return segment.get(api.SEGMENTATION_ID)
-
- def update_port_precommit(self, context):
- """Adds port profile and vlan information to the DB.
-
- Assign a port profile to this port. To do that:
- 1. Get the vlan_id associated with the bound segment
- 2. Check if a port profile already exists for this vlan_id
- 3. If yes, associate that port profile with this port.
- 4. If no, create a new port profile with this vlan_id and
- associate with this port
- """
- LOG.debug("Inside update_port_precommit")
- vnic_type = context.current.get(portbindings.VNIC_TYPE,
- portbindings.VNIC_NORMAL)
-
- profile = context.current.get(portbindings.PROFILE, {})
-
- if not self.driver.check_vnic_type_and_vendor_info(vnic_type,
- profile):
- LOG.debug("update_port_precommit encountered a non-SR-IOV port")
- return
-
- # If this is an Intel SR-IOV vnic, then no need to create port
- # profile on the UCS manager. So no need to update the DB.
- if not self.driver.is_vmfex_port(profile):
- LOG.debug("update_port_precommit has nothing to do for this "
- "sr-iov port")
- return
-
- vlan_id = self._get_vlanid(context)
-
- if not vlan_id:
- LOG.warn(_LW("update_port_precommit: vlan_id is None."))
- return
-
- p_profile_name = self.make_profile_name(vlan_id)
- LOG.debug("update_port_precommit: Profile: %s, VLAN_id: %d",
- p_profile_name, vlan_id)
-
- # Create a new port profile entry in the db
- self.ucsm_db.add_port_profile(p_profile_name, vlan_id)
-
- def update_port_postcommit(self, context):
- """Creates a port profile on UCS Manager.
-
- Creates a Port Profile for this VLAN if it does not already
- exist.
- """
- LOG.debug("Inside update_port_postcommit")
- vlan_id = self._get_vlanid(context)
-
- if not vlan_id:
- LOG.warn(_LW("update_port_postcommit: vlan_id is None."))
- return
-
- # Check if UCS Manager needs to create a Port Profile.
- # 1. Make sure this is a vm_fex_port.(Port profiles are created
- # only for VM-FEX ports.)
- # 2. Make sure update_port_precommit added an entry in the DB
- # for this port profile
- # 3. Make sure that the Port Profile hasn't already been created.
-
- profile = context.current.get(portbindings.PROFILE, {})
- vnic_type = context.current.get(portbindings.VNIC_TYPE,
- portbindings.VNIC_NORMAL)
-
- if (self.driver.check_vnic_type_and_vendor_info(vnic_type, profile) and
- self.driver.is_vmfex_port(profile)):
-
- LOG.debug("update_port_postcommit: VM-FEX port updated for "
- "vlan_id %d", vlan_id)
-
- profile_name = self.ucsm_db.get_port_profile_for_vlan(vlan_id)
- if self.ucsm_db.is_port_profile_created(vlan_id):
- LOG.debug("update_port_postcommit: Port Profile %s for "
- "vlan_id %d already exists. Nothing to do.",
- profile_name, vlan_id)
- return
-
- # Ask the UCS Manager driver to create the above Port Profile.
- # Connection to the UCS Manager is managed from within the driver.
- if self.driver.create_portprofile(profile_name, vlan_id,
- vnic_type):
- # Port profile created on UCS, record that in the DB.
- self.ucsm_db.set_port_profile_created(vlan_id, profile_name)
- return
-
- else:
- # Enable vlan-id for this regular Neutron virtual port.
- host_id = context.current.get(portbindings.HOST_ID)
- LOG.debug("update_port_postcommit: Host_id is %s", host_id)
- self.driver.update_serviceprofile(host_id, vlan_id)
-
- def delete_network_precommit(self, context):
- """Delete entry corresponding to Network's VLAN in the DB."""
-
- segments = context.network_segments
- vlan_id = segments[0]['segmentation_id']
-
- if vlan_id:
- self.ucsm_db.delete_vlan_entry(vlan_id)
-
- def delete_network_postcommit(self, context):
- """Delete all configuration added to UCS Manager for the vlan_id."""
-
- segments = context.network_segments
- vlan_id = segments[0]['segmentation_id']
- port_profile = self.make_profile_name(vlan_id)
-
- if vlan_id:
- self.driver.delete_all_config_for_vlan(vlan_id, port_profile)
-
- def bind_port(self, context):
- """Binds port to current network segment.
-
- Binds port only if the vnic_type is direct or macvtap and
- the port is from a supported vendor. While binding port set it
- in ACTIVE state and provide the Port Profile or Vlan Id as part
- vif_details.
- """
- vnic_type = context.current.get(portbindings.VNIC_TYPE,
- portbindings.VNIC_NORMAL)
-
- LOG.debug("Attempting to bind port %(port)s with vnic_type "
- "%(vnic_type)s on network %(network)s",
- {'port': context.current['id'],
- 'vnic_type': vnic_type,
- 'network': context.network.current['id']})
-
- profile = context.current.get(portbindings.PROFILE, {})
-
- if not self.driver.check_vnic_type_and_vendor_info(vnic_type,
- profile):
- return
-
- for segment in context.network.network_segments:
- if self.check_segment(segment):
- vlan_id = segment[api.SEGMENTATION_ID]
-
- if not vlan_id:
- LOG.warn(_LW("Bind port: vlan_id is None."))
- return
-
- LOG.debug("Port binding to Vlan_id: %s", str(vlan_id))
-
- # Check if this is a Cisco VM-FEX port or Intel SR_IOV port
- if self.driver.is_vmfex_port(profile):
- profile_name = self.make_profile_name(vlan_id)
- self.vif_details[
- const.VIF_DETAILS_PROFILEID] = profile_name
- else:
- self.vif_details[
- portbindings.VIF_DETAILS_VLAN] = str(vlan_id)
-
- context.set_binding(segment[api.ID],
- self.vif_type,
- self.vif_details,
- constants.PORT_STATUS_ACTIVE)
- return
-
- LOG.error(_LE("UCS Mech Driver: Failed binding port ID %(id)s "
- "on any segment of network %(network)s"),
- {'id': context.current['id'],
- 'network': context.network.current['id']})
-
- @staticmethod
- def check_segment(segment):
- network_type = segment[api.NETWORK_TYPE]
- return network_type == p_const.TYPE_VLAN
-
- @staticmethod
- def make_profile_name(vlan_id):
- return const.PORT_PROFILE_NAME_PREFIX + str(vlan_id)
+++ /dev/null
-# Copyright 2015 Cisco Systems, Inc.
-# All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
-
-import sqlalchemy as sa
-
-from neutron.db import model_base
-
-
-class PortProfile(model_base.BASEV2):
-
- """Port profiles created on the UCS Manager."""
-
- __tablename__ = 'ml2_ucsm_port_profiles'
-
- vlan_id = sa.Column(sa.Integer(), nullable=False, primary_key=True)
- profile_id = sa.Column(sa.String(64), nullable=False)
- created_on_ucs = sa.Column(sa.Boolean(), nullable=False)
etc/neutron/plugins/ml2/ml2_conf.ini
etc/neutron/plugins/ml2/ml2_conf_brocade.ini
etc/neutron/plugins/ml2/ml2_conf_brocade_fi_ni.ini
- etc/neutron/plugins/ml2/ml2_conf_cisco.ini
etc/neutron/plugins/ml2/ml2_conf_ofa.ini
etc/neutron/plugins/ml2/ml2_conf_fslsdn.ini
etc/neutron/plugins/ml2/ml2_conf_sriov.ini
linuxbridge = neutron.plugins.ml2.drivers.linuxbridge.mech_driver.mech_linuxbridge:LinuxbridgeMechanismDriver
openvswitch = neutron.plugins.ml2.drivers.openvswitch.mech_driver.mech_openvswitch:OpenvswitchMechanismDriver
hyperv = neutron.plugins.ml2.drivers.hyperv.mech_hyperv:HypervMechanismDriver
- cisco_ucsm = neutron.plugins.ml2.drivers.cisco.ucsm.mech_cisco_ucsm:CiscoUcsmMechanismDriver
l2population = neutron.plugins.ml2.drivers.l2pop.mech_driver:L2populationMechanismDriver
ofagent = neutron.plugins.ml2.drivers.ofagent.driver:OfagentMechanismDriver
mlnx = neutron.plugins.ml2.drivers.mlnx.mech_mlnx:MlnxMechanismDriver
Code Review / openstack-build / neutron-build.git / commitdiff