# Ensure that configured gateway is on subnet
# force_gateway_on_subnet = False
-
-# RPC configuration options. Defined in rpc __init__
-# The messaging module to use, defaults to kombu.
-# rpc_backend = neutron.openstack.common.rpc.impl_kombu
-# Size of RPC thread pool
-# rpc_thread_pool_size = 64
-# Size of RPC connection pool
-# rpc_conn_pool_size = 30
-# Seconds to wait for a response from call or multicall
-# rpc_response_timeout = 60
-# Seconds to wait before a cast expires (TTL). Only supported by impl_zmq.
-# rpc_cast_timeout = 30
-# Modules of exceptions that are permitted to be recreated
-# upon receiving exception data from an rpc call.
-# allowed_rpc_exception_modules = neutron.openstack.common.exception, nova.exception
-# AMQP exchange to connect to if using RabbitMQ or QPID
-# control_exchange = neutron
-
-# If passed, use a fake RabbitMQ provider
-# fake_rabbit = False
-
-# Configuration options if sending notifications via kombu rpc (these are
-# the defaults)
-# SSL version to use (valid only if SSL enabled)
-# kombu_ssl_version =
-# SSL key file (valid only if SSL enabled)
-# kombu_ssl_keyfile =
-# SSL cert file (valid only if SSL enabled)
-# kombu_ssl_certfile =
-# SSL certification authority file (valid only if SSL enabled)
-# kombu_ssl_ca_certs =
-# IP address of the RabbitMQ installation
-# rabbit_host = localhost
-# Password of the RabbitMQ server
-# rabbit_password = guest
-# Port where RabbitMQ server is running/listening
-# rabbit_port = 5672
-# RabbitMQ single or HA cluster (host:port pairs i.e: host1:5672, host2:5672)
-# rabbit_hosts is defaulted to '$rabbit_host:$rabbit_port'
-# rabbit_hosts = localhost:5672
-# User ID used for RabbitMQ connections
-# rabbit_userid = guest
-# Location of a virtual RabbitMQ installation.
-# rabbit_virtual_host = /
-# Maximum retries with trying to connect to RabbitMQ
-# (the default of 0 implies an infinite retry count)
-# rabbit_max_retries = 0
-# RabbitMQ connection retry interval
-# rabbit_retry_interval = 1
-# Use HA queues in RabbitMQ (x-ha-policy: all). You need to
-# wipe RabbitMQ database when changing this option. (boolean value)
-# rabbit_ha_queues = false
-
-# QPID
-# rpc_backend=neutron.openstack.common.rpc.impl_qpid
-# Qpid broker hostname
-# qpid_hostname = localhost
-# Qpid broker port
-# qpid_port = 5672
-# Qpid single or HA cluster (host:port pairs i.e: host1:5672, host2:5672)
-# qpid_hosts is defaulted to '$qpid_hostname:$qpid_port'
-# qpid_hosts = localhost:5672
-# Username for qpid connection
-# qpid_username = ''
-# Password for qpid connection
-# qpid_password = ''
-# Space separated list of SASL mechanisms to use for auth
-# qpid_sasl_mechanisms = ''
-# Seconds between connection keepalive heartbeats
-# qpid_heartbeat = 60
-# Transport to use, either 'tcp' or 'ssl'
-# qpid_protocol = tcp
-# Disable Nagle algorithm
-# qpid_tcp_nodelay = True
-
-# ZMQ
-# rpc_backend=neutron.openstack.common.rpc.impl_zmq
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address.
-# rpc_zmq_bind_address = *
-
-# ============ Notification System Options =====================
-
-# Notifications can be sent when network/subnet/port are created, updated or deleted.
-# There are three methods of sending notifications: logging (via the
-# log_file directive), rpc (via a message queue) and
-# noop (no notifications sent, the default)
-
-# Notification_driver can be defined multiple times
-# Do nothing driver
-# notification_driver = neutron.openstack.common.notifier.no_op_notifier
-# Logging driver
-# notification_driver = neutron.openstack.common.notifier.log_notifier
-# RPC driver.
-notification_driver = neutron.openstack.common.notifier.rpc_notifier
-
-# default_notification_level is used to form actual topic name(s) or to set logging level
-# default_notification_level = INFO
-
-# default_publisher_id is a part of the notification payload
-# host = myhost.com
-# default_publisher_id = $host
-
-# Defined in rpc_notifier, can be comma separated values.
-# The actual topic names will be %s.%(default_notification_level)s
-# notification_topics = notifications
-
# Default maximum number of items returned in a single response,
# value == infinite and value < 0 means no max limit, and value must
# be greater than 0. If the number of items requested is greater than
# ======== end of neutron nova interactions ==========
+#
+# Options defined in oslo.messaging
+#
+
+# Use durable queues in amqp. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues=false
+
+# Auto-delete queues in amqp. (boolean value)
+#amqp_auto_delete=false
+
+# Size of RPC connection pool. (integer value)
+#rpc_conn_pool_size=30
+
+# Qpid broker hostname. (string value)
+#qpid_hostname=localhost
+
+# Qpid broker port. (integer value)
+#qpid_port=5672
+
+# Qpid HA cluster host:port pairs. (list value)
+#qpid_hosts=$qpid_hostname:$qpid_port
+
+# Username for Qpid connection. (string value)
+#qpid_username=
+
+# Password for Qpid connection. (string value)
+#qpid_password=
+
+# Space separated list of SASL mechanisms to use for auth.
+# (string value)
+#qpid_sasl_mechanisms=
+
+# Seconds between connection keepalive heartbeats. (integer
+# value)
+#qpid_heartbeat=60
+
+# Transport to use, either 'tcp' or 'ssl'. (string value)
+#qpid_protocol=tcp
+
+# Whether to disable the Nagle algorithm. (boolean value)
+#qpid_tcp_nodelay=true
+
+# The qpid topology version to use. Version 1 is what was
+# originally used by impl_qpid. Version 2 includes some
+# backwards-incompatible changes that allow broker federation
+# to work. Users should update to version 2 when they are
+# able to take everything down, as it requires a clean break.
+# (integer value)
+#qpid_topology_version=1
+
+# SSL version to use (valid only if SSL enabled). valid values
+# are TLSv1, SSLv23 and SSLv3. SSLv2 may be available on some
+# distributions. (string value)
+#kombu_ssl_version=
+
+# SSL key file (valid only if SSL enabled). (string value)
+#kombu_ssl_keyfile=
+
+# SSL cert file (valid only if SSL enabled). (string value)
+#kombu_ssl_certfile=
+
+# SSL certification authority file (valid only if SSL
+# enabled). (string value)
+#kombu_ssl_ca_certs=
+
+# How long to wait before reconnecting in response to an AMQP
+# consumer cancel notification. (floating point value)
+#kombu_reconnect_delay=1.0
+
+# The RabbitMQ broker address where a single node is used.
+# (string value)
+#rabbit_host=localhost
+
+# The RabbitMQ broker port where a single node is used.
+# (integer value)
+#rabbit_port=5672
+
+# RabbitMQ HA cluster host:port pairs. (list value)
+#rabbit_hosts=$rabbit_host:$rabbit_port
+
+# Connect over SSL for RabbitMQ. (boolean value)
+#rabbit_use_ssl=false
+
+# The RabbitMQ userid. (string value)
+#rabbit_userid=guest
+
+# The RabbitMQ password. (string value)
+#rabbit_password=guest
+
+# the RabbitMQ login method (string value)
+#rabbit_login_method=AMQPLAIN
+
+# The RabbitMQ virtual host. (string value)
+#rabbit_virtual_host=/
+
+# How frequently to retry connecting with RabbitMQ. (integer
+# value)
+#rabbit_retry_interval=1
+
+# How long to backoff for between retries when connecting to
+# RabbitMQ. (integer value)
+#rabbit_retry_backoff=2
+
+# Maximum number of RabbitMQ connection retries. Default is 0
+# (infinite retry count). (integer value)
+#rabbit_max_retries=0
+
+# Use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. (boolean
+# value)
+#rabbit_ha_queues=false
+
+# If passed, use a fake RabbitMQ provider. (boolean value)
+#fake_rabbit=false
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve
+# to this address. (string value)
+#rpc_zmq_bind_address=*
+
+# MatchMaker driver. (string value)
+#rpc_zmq_matchmaker=oslo.messaging._drivers.matchmaker.MatchMakerLocalhost
+
+# ZeroMQ receiver listening port. (integer value)
+#rpc_zmq_port=9501
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts=1
+
+# Maximum number of ingress messages to locally buffer per
+# topic. Default is unlimited. (integer value)
+#rpc_zmq_topic_backlog=<None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir=/var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP
+# address. Must match "host" option, if running Nova. (string
+# value)
+#rpc_zmq_host=oslo
+
+# Seconds to wait before a cast expires (TTL). Only supported
+# by impl_zmq. (integer value)
+#rpc_cast_timeout=30
+
+# Heartbeat frequency. (integer value)
+#matchmaker_heartbeat_freq=300
+
+# Heartbeat time-to-live. (integer value)
+#matchmaker_heartbeat_ttl=600
+
+# Size of RPC greenthread pool. (integer value)
+#rpc_thread_pool_size=64
+
+# Driver or drivers to handle sending notifications. (multi
+# valued)
+#notification_driver=
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+#notification_topics=notifications
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout=60
+
+# A URL representing the messaging driver to use and its full
+# configuration. If not set, we fall back to the rpc_backend
+# option and driver specific configuration. (string value)
+#transport_url=<None>
+
+# The messaging driver to use, defaults to rabbit. Other
+# drivers include qpid and zmq. (string value)
+#rpc_backend=rabbit
+
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the
+# transport_url option. (string value)
+#control_exchange=openstack
+
+
+[matchmaker_redis]
+
+#
+# Options defined in oslo.messaging
+#
+
+# Host to locate redis. (string value)
+#host=127.0.0.1
+
+# Use this port to connect to redis host. (integer value)
+#port=6379
+
+# Password for Redis server (optional). (string value)
+#password=<None>
+
+
+[matchmaker_ring]
+
+#
+# Options defined in oslo.messaging
+#
+
+# Matchmaker ring file (JSON). (string value)
+# Deprecated group/name - [DEFAULT]/matchmaker_ringfile
+#ringfile=/etc/oslo/matchmaker_ring.json
+
[quotas]
# Default driver to use for quota checks
# quota_driver = neutron.db.quota_db.DbQuotaDriver
Code Review / openstack-build / neutron-build.git / commitdiff