# to 'vlan' and configure network_vlan_ranges below or to 'flat'.
# Set to 'none' to disable creation of tenant networks.
#
-# Default: tenant_network_type = local
+# tenant_network_type = local
# Example: tenant_network_type = vlan
# (ListOpt) Comma-separated list of
# available for tenant network allocation if tenant_network_type is
# 'vlan'. If empty, only gre and local networks may be created.
#
-# Default: network_vlan_ranges =
+# network_vlan_ranges =
# Example: network_vlan_ranges = physnet1:1000:2999
[AGENT]
# Agent's polling interval in seconds
-polling_interval = 2
+# polling_interval = 2
# (ListOpt) Comma separated list of <physical_network>:<vswitch>
# where the physical networks can be expressed with wildcards,
# If a given physical network name will not match any value in the list
# the plugin will look for a virtual switch with the same name.
#
-# Default: physical_network_vswitch_mappings = *:external
+# physical_network_vswitch_mappings = *:external
# Example: physical_network_vswitch_mappings = net1:external1,net2:external2
# (StrOpt) Private virtual switch name used for local networking.
#
-# Default: local_network_vswitch = private
+# local_network_vswitch = private
# Example: local_network_vswitch = custom_vswitch
#-----------------------------------------------------------------------------
# networks to provide connectivity between hosts. Set to 'none' to
# disable creation of tenant networks.
#
-# Default: tenant_network_type = local
+# tenant_network_type = local
# Example: tenant_network_type = vlan
# (ListOpt) Comma-separated list of
# available for tenant network allocation if tenant_network_type is
# 'vlan'. If empty, only local networks may be created.
#
-# Default: network_vlan_ranges =
+# network_vlan_ranges =
# Example: network_vlan_ranges = physnet1:1000:2999
[DATABASE]
# networks listed in network_vlan_ranges on the server should have
# mappings to appropriate interfaces on each agent.
#
-# Default: physical_interface_mappings =
+# physical_interface_mappings =
# Example: physical_interface_mappings = physnet1:eth1
[AGENT]
# Agent's polling interval in seconds
-polling_interval = 2
+# polling_interval = 2
# (BoolOpt) Enable server RPC compatibility with old (pre-havana)
# agents.
#
-# Default: rpc_support_old_agents = True
+# rpc_support_old_agents = True
# Example: rpc_support_old_agents = False
[SECURITYGROUP]
# Firewall driver for realizing quantum security group function
-firewall_driver = quantum.agent.linux.iptables_firewall.IptablesFirewallDriver
+# firewall_driver = quantum.agent.firewall.NoopFirewallDriver
+# Example: firewall_driver = quantum.agent.linux.iptables_firewall.IptablesFirewallDriver
# (StrOpt) SQLAlchemy database connection string. This MUST be changed
# to actually run the plugin with persistent storage.
#
-# Default: sql_connection = sqlite://
+# sql_connection = sqlite://
# Example: sql_connection = mysql://root:password@localhost/quantum_ml2?charset=utf8
# (IntOpt) Database reconnection retry limit after database
# connectivity is lost. Value of -1 specifies infinite retry limit.
#
-# Default: sql_max_retries = -1
+# sql_max_retries = -1
# Example: sql_max_retries = 10
# (IntOpt) Database reconnection interval in seconds after the initial
# connection to the database fails.
#
-# Default: reconnect_interval = 2
+# reconnect_interval = 2
# Example: reconnect_interval = 10
# (BoolOpt) Enable the use of eventlet's db_pool for MySQL. The flags
# sql_min_pool_size, sql_max_pool_size and sql_idle_timeout are
# relevant only if this is enabled.
#
-# Default: sql_dbpool_enable = False
+# sql_dbpool_enable = False
# Example: sql_dbpool_enable = True
# (IntOpt) Minimum number of MySQL connections to keep open in a pool.
#
-# Default: sql_min_pool_size = 1
+# sql_min_pool_size = 1
# Example: sql_min_pool_size = 5
# (IntOpt) Maximum number of MySQL connections to keep open in a pool.
#
-# Default: sql_max_pool_size = 5
+# sql_max_pool_size = 5
# Example: sql_max_pool_size = 20
# (IntOpt) Timeout in seconds before idle MySQL connections are
# reaped.
#
-# Default: sql_idle_timeout = 3600
+# sql_idle_timeout = 3600
# Example: sql_idle_timeout = 6000
# (IntOpt) Maximum number of SQL connections to keep open in a
# QueuePool in SQLAlchemy.
#
-# Default: sqlalchemy_pool_size = 5
+# sqlalchemy_pool_size = 5
# Example: sqlalchemy_pool_size = 10
[ml2]
# (ListOpt) List of network type driver entrypoints to be loaded from
# the quantum.ml2.type_drivers namespace.
#
-# Default: type_drivers = local,flat,vlan
+# type_drivers = local,flat,vlan
# Example: type_drivers = flat,vlan,gre
# (ListOpt) Ordered list of network_types to allocate as tenant
# networks. The default value 'local' is useful for single-box testing
# but provides no connectivity between hosts.
#
-# Default: tenant_network_types = local
+# tenant_network_types = local
# Example: tenant_network_types = vlan,gre
[ml2_type_flat]
# can be created. Use * to allow flat networks with arbitrary
# physical_network names.
#
-# Default:flat_networks =
+# flat_networks =
# Example:flat_networks = physnet1,physnet2
# Example:flat_networks = *
# tenant networks, as well as ranges of VLAN tags on each
# physical_network available for allocation as tenant networks.
#
-# Default: network_vlan_ranges =
+# network_vlan_ranges =
# Example: network_vlan_ranges = physnet1:1000:2999,physnet2
# in order for tenant networks to provide connectivity between hosts.
# Set to 'none' to disable creation of tenant networks.
#
-# Default: tenant_network_type = vlan
+# tenant_network_type = vlan
# Example: tenant_network_type = vlan
# (ListOpt) Comma-separated list of
# available for tenant network allocation if tenant_network_type is
# 'vlan'. If empty, only local networks may be created.
#
-# Default: network_vlan_ranges =
+# network_vlan_ranges =
# Example: network_vlan_ranges = default:1:100
[DATABASE]
# set to -1 implies an infinite retry count
# sql_max_retries = 10
# Database reconnection interval in seconds - in event connectivity is lost
-reconnect_interval = 2
+# reconnect_interval = 2
[ESWITCH]
# (ListOpt) Comma-separated list of
# networks listed in network_vlan_ranges on the server should have
# mappings to appropriate interfaces on each agent.
#
-# Default: physical_interface_mappings =
+# physical_interface_mappings =
# Example: physical_interface_mappings = default:eth2
# (StrOpt) Type of Network Interface to allocate for VM:
# direct or hosdev according to libvirt terminology
-# Default: vnic_type = direct
+# vnic_type = direct
# (StrOpt) Eswitch daemon end point connection url
-# Default: daemon_endpoint = 'tcp://127.0.0.1:5001'
+# daemon_endpoint = 'tcp://127.0.0.1:5001'
# The number of milliseconds the agent will wait for
# response on request to daemon
-# Default: request_timeout = 3000
+# request_timeout = 3000
[AGENT]
# Agent's polling interval in seconds
-polling_interval = 2
+# polling_interval = 2
# networks to provide connectivity between hosts. Set to 'none' to
# disable creation of tenant networks.
#
-# Default: tenant_network_type = local
+# tenant_network_type = local
# Example: tenant_network_type = gre
# (ListOpt) Comma-separated list of
# available for tenant network allocation if tenant_network_type is
# 'vlan'. If empty, only gre and local networks may be created.
#
-# Default: network_vlan_ranges =
+# network_vlan_ranges =
# Example: network_vlan_ranges = physnet1:1000:2999
# (BoolOpt) Set to True in the server and the agents to enable support
# for GRE networks. Requires kernel support for OVS patch ports and
# GRE tunneling.
#
-# Default: enable_tunneling = False
+# enable_tunneling = False
# (ListOpt) Comma-separated list of <tun_min>:<tun_max> tuples
# enumerating ranges of GRE tunnel IDs that are available for tenant
# network allocation if tenant_network_type is 'gre'.
#
-# Default: tunnel_id_ranges =
+# tunnel_id_ranges =
# Example: tunnel_id_ranges = 1:1000
# Do not change this parameter unless you have a good reason to.
# attached to this bridge and then "patched" according to their network
# connectivity.
#
-# Default: integration_bridge = br-int
+# integration_bridge = br-int
# Only used for the agent if tunnel_id_ranges (above) is not empty for
# the server. In most cases, the default value should be fine.
#
-# Default: tunnel_bridge = br-tun
+# tunnel_bridge = br-tun
# Peer patch port in integration bridge for tunnel bridge
# int_peer_patch_port = patch-tun
# empty for the server. Set local-ip to be the local IP address of
# this hypervisor.
#
-# Default: local_ip =
+# local_ip =
# (ListOpt) Comma-separated list of <physical_network>:<bridge> tuples
# mapping physical network names to the agent's node-specific OVS
# port. All physical networks listed in network_vlan_ranges on the
# server should have mappings to appropriate bridges on each agent.
#
-# Default: bridge_mappings =
+# bridge_mappings =
# Example: bridge_mappings = physnet1:br-eth1
[AGENT]
# Agent's polling interval in seconds
-polling_interval = 2
+# polling_interval = 2
[SECURITYGROUP]
-# Firewall driver for realizing quantum security group function
-# firewall_driver = quantum.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver
+# Firewall driver for realizing quantum security group function.
+# firewall_driver = quantum.agent.firewall.NoopFirewallDriver
+# Example: firewall_driver = quantum.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver
#-----------------------------------------------------------------------------
# Sample Configurations.
Code Review / openstack-build / neutron-build.git / commitdiff