msgstr ""
"Project-Id-Version: Cinder\n"
"Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2013-05-08 11:44+0000\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: Bulgarian (Bulgaria) "
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr ""
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: cinder\n"
"Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2012-01-19 20:22+0000\n"
"Last-Translator: yazar <zrncescientiae@gmail.com>\n"
"Language-Team: Bosnian <bs@li.org>\n"
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr "Neočekivana greška prilikom pokretanja komande."
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: Cinder\n"
"Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2013-05-29 08:13+0000\n"
"Last-Translator: openstackjenkins <jenkins@openstack.org>\n"
"Language-Team: Catalan "
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr ""
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
#, fuzzy
msgid ""
msgstr ""
-"Project-Id-Version: cinder jenkins.cinder.propose.translation.update.85\n"
+"Project-Id-Version: cinder jenkins.cinder.propose.translation.update.86\n"
"Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
msgstr ""
"Project-Id-Version: cinder\n"
"Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2012-04-04 20:28+0000\n"
"Last-Translator: Zbyněk Schwarz <Unknown>\n"
"Language-Team: Czech <cs@li.org>\n"
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr "Při spuštění příkazu došlo k nečekané chybě."
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: cinder\n"
"Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2011-01-15 21:46+0000\n"
"Last-Translator: Soren Hansen <soren@linux2go.dk>\n"
"Language-Team: Danish <da@li.org>\n"
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr ""
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: cinder\n"
"Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2011-08-23 11:23+0000\n"
"Last-Translator: Thierry Carrez <thierry.carrez+lp@gmail.com>\n"
"Language-Team: German <de@li.org>\n"
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr "Unerwarteter Fehler bei Ausführung des Kommandos."
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: cinder\n"
"Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2011-10-21 11:27+0000\n"
"Last-Translator: Tom Fifield <Unknown>\n"
"Language-Team: English (Australia) <en_AU@li.org>\n"
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr "Unexpected error while running command."
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: cinder\n"
"Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2012-03-30 11:10+0000\n"
"Last-Translator: Anthony Harrington <untaintableangel@hotmail.co.uk>\n"
"Language-Team: English (United Kingdom) <en_GB@li.org>\n"
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr "Unexpected error while running command."
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: Cinder\n"
"Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2013-05-08 11:44+0000\n"
"Last-Translator: markmc <markmc@redhat.com>\n"
"Language-Team: en_US <LL@li.org>\n"
msgid "delete %s finished"
msgstr "delete %s finished"
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
-msgstr "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr "Unexpected state while cloning %s"
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr "iSCSI device not found at %s"
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: cinder\n"
"Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2012-03-10 06:08+0000\n"
"Last-Translator: Oscar Rosario <oscar.inirio@gmail.com>\n"
"Language-Team: Spanish <es@li.org>\n"
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr "Error inesperado mientras el comando se ejecutaba"
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: Cinder\n"
"Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2013-05-08 11:44+0000\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: Finnish (Finland) "
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr ""
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: cinder\n"
"Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2012-04-06 14:54+0000\n"
"Last-Translator: EmmanuelLeNormand <manu@ubuntu-fr.org>\n"
"Language-Team: French <fr@li.org>\n"
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr "Erreur imprévue lors de l'éxecution de la commande"
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: Cinder\n"
"Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2013-05-29 08:13+0000\n"
"Last-Translator: openstackjenkins <jenkins@openstack.org>\n"
"Language-Team: Croatian "
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr ""
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: Cinder\n"
"Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2013-05-29 08:13+0000\n"
"Last-Translator: openstackjenkins <jenkins@openstack.org>\n"
"Language-Team: Hungarian "
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr ""
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: Cinder\n"
"Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2013-05-29 08:13+0000\n"
"Last-Translator: openstackjenkins <jenkins@openstack.org>\n"
"Language-Team: Indonesian "
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr ""
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: cinder\n"
"Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2012-04-01 18:59+0000\n"
"Last-Translator: simone.sandri <lexluxsox@hotmail.it>\n"
"Language-Team: Italian <it@li.org>\n"
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr "Si e' verificato un errore inatteso durante l'esecuzione del comando."
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: Cinder\n"
"Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2013-05-29 08:13+0000\n"
"Last-Translator: openstackjenkins <jenkins@openstack.org>\n"
"Language-Team: Italian (Italy) "
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr ""
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: cinder\n"
"Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2011-08-23 11:22+0000\n"
"Last-Translator: Thierry Carrez <thierry.carrez+lp@gmail.com>\n"
"Language-Team: \n"
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr "コマンド実行において予期しないエラーが発生しました。"
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: Cinder\n"
"Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2013-05-29 08:13+0000\n"
"Last-Translator: openstackjenkins <jenkins@openstack.org>\n"
"Language-Team: Georgian (Georgia) "
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr ""
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: cinder\n"
"Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2011-12-16 04:42+0000\n"
"Last-Translator: Zhongyue Luo <lzyeval@gmail.com>\n"
"Language-Team: Korean <ko@li.org>\n"
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr "명령 실행도중 예측하지 못한 에러가 발생했습니다"
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: Cinder\n"
"Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2013-05-08 11:44+0000\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: Korean (Korea) "
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr ""
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: Cinder\n"
"Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2013-05-29 08:13+0000\n"
"Last-Translator: openstackjenkins <jenkins@openstack.org>\n"
"Language-Team: Malay "
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr ""
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: Cinder\n"
"Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2013-05-29 08:13+0000\n"
"Last-Translator: openstackjenkins <jenkins@openstack.org>\n"
"Language-Team: Norwegian Bokmål "
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr ""
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: Cinder\n"
"Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2013-05-29 08:13+0000\n"
"Last-Translator: openstackjenkins <jenkins@openstack.org>\n"
"Language-Team: Dutch (Netherlands) "
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr ""
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: Cinder\n"
"Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2013-07-01 16:14+0000\n"
"Last-Translator: openstackjenkins <jenkins@openstack.org>\n"
"Language-Team: Polish (Poland) "
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr ""
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: Cinder\n"
"Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2013-05-29 08:13+0000\n"
"Last-Translator: openstackjenkins <jenkins@openstack.org>\n"
"Language-Team: Portuguese "
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr ""
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: cinder\n"
"Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2012-02-06 21:07+0000\n"
"Last-Translator: Adriano Steffler <Unknown>\n"
"Language-Team: Brazilian Portuguese <pt_BR@li.org>\n"
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr "Erro inesperado ao executar o comando."
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: Cinder\n"
"Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2013-06-12 07:55+0000\n"
"Last-Translator: openstackjenkins <jenkins@openstack.org>\n"
"Language-Team: Romanian "
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr ""
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: cinder\n"
"Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2012-03-25 09:34+0000\n"
"Last-Translator: Eugene Marshal <Unknown>\n"
"Language-Team: Russian <ru@li.org>\n"
msgid "delete %s finished"
msgstr "_удалить: %s"
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
-msgstr "iSCSI-устройство не найдено в %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr "Неожиданная ошибка при выполнении команды."
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr "iSCSI-устройство не найдено в %s"
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: Cinder\n"
"Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2013-05-29 08:13+0000\n"
"Last-Translator: openstackjenkins <jenkins@openstack.org>\n"
"Language-Team: Russian (Russia) "
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr ""
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: Cinder\n"
"Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2013-07-01 16:14+0000\n"
"Last-Translator: openstackjenkins <jenkins@openstack.org>\n"
"Language-Team: Slovenian (Slovenia) "
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr ""
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: Cinder\n"
"Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2013-05-29 08:13+0000\n"
"Last-Translator: openstackjenkins <jenkins@openstack.org>\n"
"Language-Team: Swahili (Kenya) "
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr ""
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: cinder\n"
"Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2011-08-23 11:21+0000\n"
"Last-Translator: Thierry Carrez <thierry.carrez+lp@gmail.com>\n"
"Language-Team: Tagalog <tl@li.org>\n"
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr "Merong hindi-inaasahang pagkakamali habang tumatakbo ang command."
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: cinder\n"
"Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2011-12-14 18:10+0000\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: Turkish <tr@li.org>\n"
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr ""
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: Cinder\n"
"Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2013-05-29 08:13+0000\n"
"Last-Translator: openstackjenkins <jenkins@openstack.org>\n"
"Language-Team: Turkish (Turkey) "
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr ""
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: cinder\n"
"Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2011-08-23 11:21+0000\n"
"Last-Translator: Thierry Carrez <thierry.carrez+lp@gmail.com>\n"
"Language-Team: Ukrainian <uk@li.org>\n"
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr "Неочікувана помилка при виконанні команди."
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: Cinder\n"
"Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2013-05-08 11:44+0000\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: Vietnamese (Viet Nam) "
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr ""
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: cinder\n"
"Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2012-04-03 23:36+0000\n"
"Last-Translator: cheesecake <Unknown>\n"
"Language-Team: Chinese (Simplified) <zh_CN@li.org>\n"
msgid "delete %s finished"
msgstr "_delete: %s"
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
-msgstr "在 %s 未找到iSCSI设备"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr "运行命令时出现意外错误"
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr "在 %s 未找到iSCSI设备"
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: Cinder\n"
"Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2013-05-29 08:13+0000\n"
"Last-Translator: openstackjenkins <jenkins@openstack.org>\n"
"Language-Team: Chinese (Hong Kong) "
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr ""
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+
msgstr ""
"Project-Id-Version: cinder\n"
"Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>\n"
-"POT-Creation-Date: 2013-08-06 06:10+0000\n"
+"POT-Creation-Date: 2013-08-06 18:10+0000\n"
"PO-Revision-Date: 2012-03-07 02:00+0000\n"
"Last-Translator: Charles Hsu <charles0126+openstack@gmail.com>\n"
"Language-Team: Chinese (Traditional) <zh_TW@li.org>\n"
msgid "delete %s finished"
msgstr ""
-#: cinder/brick/initiator/connector.py:88
+#: cinder/brick/exceptions.py:22 cinder/brick/initiator/connector.py:515
+msgid "We are unable to locate any Fibre Channel devices"
+msgstr ""
+
+#: cinder/brick/exceptions.py:28
+msgid "Unable to find a Fibre Channel volume device"
+msgstr ""
+
+#: cinder/brick/exceptions.py:34
#, python-format
-msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
+msgid "Volume device not found at %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:101
+#: cinder/brick/initiator/connector.py:91
#, python-format
-msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
+msgid "Invalid InitiatorConnector protocol specified %(protocol)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:178
+#: cinder/brick/initiator/connector.py:104
#, python-format
-msgid "iSCSI device not found at %s"
+msgid "Failed to access the device on the path %(path)s: %(error)s %(info)s."
msgstr ""
-#: cinder/brick/initiator/connector.py:180
+#: cinder/brick/initiator/connector.py:182
#, python-format
msgid ""
"ISCSI volume not yet found at: %(host_device)s. Will rescan & retry. Try"
" number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:193
+#: cinder/brick/initiator/connector.py:195
#, python-format
msgid "Found iSCSI node %(host_device)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:510
-msgid "We are unable to locate any Fibre Channel devices"
+#: cinder/brick/initiator/connector.py:262
+#, python-format
+msgid "Could not find the iSCSI Initiator File %s"
msgstr ""
-#: cinder/brick/initiator/connector.py:519
+#: cinder/brick/initiator/connector.py:525
#, python-format
msgid "Looking for Fibre Channel dev %(device)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:529
-msgid "Fibre Channel device not found."
+#: cinder/brick/initiator/connector.py:535
+msgid "Fibre Channel volume device not found."
msgstr ""
-#: cinder/brick/initiator/connector.py:532
+#: cinder/brick/initiator/connector.py:539
#, python-format
msgid "Fibre volume not yet found. Will rescan & retry. Try number: %(tries)s"
msgstr ""
-#: cinder/brick/initiator/connector.py:548
+#: cinder/brick/initiator/connector.py:555
#, python-format
msgid "Found Fibre Channel volume %(name)s (after %(tries)s rescans)"
msgstr ""
-#: cinder/brick/initiator/connector.py:557
+#: cinder/brick/initiator/connector.py:564
#, python-format
msgid "Multipath device discovered %(device)s"
msgstr ""
#~ msgid "Unexpected state while cloning %s"
#~ msgstr "非預期的執行錯誤"
+#~ msgid "iSCSI device not found at %s"
+#~ msgstr ""
+
+#~ msgid "Fibre Channel device not found."
+#~ msgstr ""
+