+++ /dev/null
-[DEFAULT]
-# User name for NSX controller
-# nsx_user = admin
-
-# Password for NSX controller
-# nsx_password = admin
-
-# Time before aborting a request on an unresponsive controller (Seconds)
-# http_timeout = 75
-
-# Maximum number of times a particular request should be retried
-# retries = 2
-
-# Maximum number of times a redirect response should be followed
-# redirects = 2
-
-# Comma-separated list of NSX controller endpoints (<ip>:<port>). When port
-# is omitted, 443 is assumed. This option MUST be specified, e.g.:
-# nsx_controllers = xx.yy.zz.ww:443, aa.bb.cc.dd, ee.ff.gg.hh.ee:80
-
-# UUID of the pre-existing default NSX Transport zone to be used for creating
-# tunneled isolated "Neutron" networks. This option MUST be specified, e.g.:
-# default_tz_uuid = 1e8e52cf-fa7f-46b0-a14a-f99835a9cb53
-
-# (Optional) UUID for the default l3 gateway service to use with this cluster.
-# To be specified if planning to use logical routers with external gateways.
-# default_l3_gw_service_uuid =
-
-# (Optional) UUID for the default l2 gateway service to use with this cluster.
-# To be specified for providing a predefined gateway tenant for connecting their networks.
-# default_l2_gw_service_uuid =
-
-# (Optional) UUID for the default service cluster. A service cluster is introduced to
-# represent a group of gateways and it is needed in order to use Logical Services like
-# dhcp and metadata in the logical space. NOTE: If agent_mode is set to 'agentless' this
-# config parameter *MUST BE* set to a valid pre-existent service cluster uuid.
-# default_service_cluster_uuid =
-
-# Name of the default interface name to be used on network-gateway. This value
-# will be used for any device associated with a network gateway for which an
-# interface name was not specified
-# nsx_default_interface_name = breth0
-
-# Reconnect connection to nsx if not used within this amount of time.
-# conn_idle_timeout = 900
-
-[quotas]
-# number of network gateways allowed per tenant, -1 means unlimited
-# quota_network_gateway = 5
-
-[nsxv]
-# URL for NSXv manager
-# manager_uri = https://management_ip
-
-# User name for NSXv manager
-# user = admin
-
-# Password for NSXv manager
-# password = default
-
-# (Required) Datacenter ID for Edge deployment
-# datacenter_moid =
-
-# (Required) Cluster IDs for clusters containing OpenStack hosts
-# cluster_moid =
-
-# (Optional) Deployment Container ID for NSX Edge deployment
-# If not specified, either a default global container will be used, or
-# the resource pool and datastore specified below will be used
-# deployment_container_id =
-
-# (Optional) Resource pool ID for NSX Edge deployment
-# resource_pool_id =
-
-# (Optional) Datastore ID for NSX Edge deployment
-# datastore_id =
-
-# (Required) UUID of logic switch for physical network connectivity
-# external_network =
-
-# (Optional) Asynchronous task status check interval
-# default is 2000 (millisecond)
-# task_status_check_interval = 2000
-
-# (Optional) Network scope ID for VXLAN virtual wires
-# vdn_scope_id =
-
-# (Optional) DVS ID for VLANS
-# dvs_id =
-
-# (ListOpt) Define backup edge pool's management range with the four-tuple:
-# <edge_type>:[edge_size]:<minimum_pooled_edges>:<maximum_pooled_edges>.
-# edge_type:'service'(service edge) or 'vdr'(distributed edge).
-# edge_size: 'compact', 'large'(by default), 'xlarge' or 'quadlarge'.
-#
-# By default, edge pool manager would manage service edge
-# with compact&&large size and distributed edge with large size as following:
-# backup_edge_pool = service:large:4:10,service:compact:4:10,vdr:large:4:10
-
-# (Optional) Maximum number of sub interfaces supported per vnic in edge
-# default is 20
-# maximum_tunnels_per_vnic = 20
-
-# Maximum number of API retries
-# retries = 10
-
-# (Optional) Network ID for management network connectivity
-# mgt_net_moid =
-
-# (Optional) Management network IP address for metadata proxy
-# mgt_net_proxy_ips =
-
-# (Optional) Management network netmask for metadata proxy
-# mgt_net_proxy_netmask =
-
-# (Optional) Management network default gateway for metadata proxy
-# mgt_net_default_gateway =
-
-# (Optional) IP addresses used by Nova metadata service
-# nova_metadata_ips =
-
-# (Optional) TCP Port used by Nova metadata server
-# nova_metadata_port = 8775
-
-# (Optional) Shared secret to sign metadata requests
-# metadata_shared_secret =
-
-# (Optional) Indicates if Nsxv spoofguard component is used to implement
-# port-security feature.
-# spoofguard_enabled = True
-
-# (ListOpt) Ordered list of router_types to allocate as tenant routers.
-# It limits the router types that the Nsxv can support for tenants:
-# distributed: router is supported by distributed edge at the backend.
-# shared: multiple routers share the same service edge at the backend.
-# exclusive: router exclusivly occupies one service edge at the backend.
-# Nsxv would select the first available router type from tenant_router_types
-# list if router-type is not specified.
-# If the tenant defines the router type with "--distributed",
-# "--router_type exclusive" or "--router_type shared", Nsxv would verify that
-# the router type is in tenant_router_types.
-# Admin supports all these three router types
-#
-# tenant_router_types = shared, distributed, exclusive
-# Example: tenant_router_types = distributed, shared
-
-# (Optional) Enable an administrator to configure the edge user and password
-# Username to configure for Edge appliance login
-# edge_appliance_user =
-# (Optional) Password to configure for Edge appliance login
-# edge_appliance_password =
-
-# (Optional) URL for distributed locking coordination resource for lock manager
-# This value is passed as a parameter to tooz coordinator.
-# By default, value is None and oslo_concurrency is used for single-node
-# lock management.
-# locking_coordinator_url =
-
-# (Optional) DHCP lease time
-# dhcp_lease_time = 86400
-
-[nsx]
-# Maximum number of ports for each bridged logical switch
-# The recommended value for this parameter varies with NSX version
-# Please use:
-# NSX 2.x -> 64
-# NSX 3.0, 3.1 -> 5000
-# NSX 3.2 -> 10000
-# max_lp_per_bridged_ls = 5000
-
-# Maximum number of ports for each overlay (stt, gre) logical switch
-# max_lp_per_overlay_ls = 256
-
-# Number of connections to each controller node.
-# default is 10
-# concurrent_connections = 10
-
-# Number of seconds a generation id should be valid for (default -1 meaning do not time out)
-# nsx_gen_timeout = -1
-
-# Acceptable values for 'metadata_mode' are:
-# - 'access_network': this enables a dedicated connection to the metadata
-# proxy for metadata server access via Neutron router.
-# - 'dhcp_host_route': this enables host route injection via the dhcp agent.
-# This option is only useful if running on a host that does not support
-# namespaces otherwise access_network should be used.
-# metadata_mode = access_network
-
-# The default network transport type to use (stt, gre, bridge, ipsec_gre, or ipsec_stt)
-# default_transport_type = stt
-
-# Specifies in which mode the plugin needs to operate in order to provide DHCP and
-# metadata proxy services to tenant instances. If 'agent' is chosen (default)
-# the NSX plugin relies on external RPC agents (i.e. dhcp and metadata agents) to
-# provide such services. In this mode, the plugin supports API extensions 'agent'
-# and 'dhcp_agent_scheduler'. If 'agentless' is chosen (experimental in Icehouse),
-# the plugin will use NSX logical services for DHCP and metadata proxy. This
-# simplifies the deployment model for Neutron, in that the plugin no longer requires
-# the RPC agents to operate. When 'agentless' is chosen, the config option metadata_mode
-# becomes ineffective. The 'agentless' mode is supported from NSX 4.2 or above.
-# Furthermore, a 'combined' mode is also provided and is used to support existing
-# deployments that want to adopt the agentless mode going forward. With this mode,
-# existing networks keep being served by the existing infrastructure (thus preserving
-# backward compatibility, whereas new networks will be served by the new infrastructure.
-# Migration tools are provided to 'move' one network from one model to another; with
-# agent_mode set to 'combined', option 'network_auto_schedule' in neutron.conf is
-# ignored, as new networks will no longer be scheduled to existing dhcp agents.
-# agent_mode = agent
-
-# Specifies which mode packet replication should be done in. If set to service
-# a service node is required in order to perform packet replication. This can
-# also be set to source if one wants replication to be performed locally (NOTE:
-# usually only useful for testing if one does not want to deploy a service node).
-# In order to leverage distributed routers, replication_mode should be set to
-# "service".
-# replication_mode = service
-
-[nsx_sync]
-# Interval in seconds between runs of the status synchronization task.
-# The plugin will aim at resynchronizing operational status for all
-# resources in this interval, and it should be therefore large enough
-# to ensure the task is feasible. Otherwise the plugin will be
-# constantly synchronizing resource status, ie: a new task is started
-# as soon as the previous is completed.
-# If this value is set to 0, the state synchronization thread for this
-# Neutron instance will be disabled.
-# state_sync_interval = 10
-
-# Random additional delay between two runs of the state synchronization task.
-# An additional wait time between 0 and max_random_sync_delay seconds
-# will be added on top of state_sync_interval.
-# max_random_sync_delay = 0
-
-# Minimum delay, in seconds, between two status synchronization requests for NSX.
-# Depending on chunk size, controller load, and other factors, state
-# synchronization requests might be pretty heavy. This means the
-# controller might take time to respond, and its load might be quite
-# increased by them. This parameter allows to specify a minimum
-# interval between two subsequent requests.
-# The value for this parameter must never exceed state_sync_interval.
-# If this does, an error will be raised at startup.
-# min_sync_req_delay = 1
-
-# Minimum number of resources to be retrieved from NSX in a single status
-# synchronization request.
-# The actual size of the chunk will increase if the number of resources is such
-# that using the minimum chunk size will cause the interval between two
-# requests to be less than min_sync_req_delay
-# min_chunk_size = 500
-
-# Enable this option to allow punctual state synchronization on show
-# operations. In this way, show operations will always fetch the operational
-# status of the resource from the NSX backend, and this might have
-# a considerable impact on overall performance.
-# always_read_status = False
-
-[nsx_lsn]
-# Pull LSN information from NSX in case it is missing from the local
-# data store. This is useful to rebuild the local store in case of
-# server recovery
-# sync_on_missing_data = False
-
-[nsx_dhcp]
-# (Optional) Comma separated list of additional dns servers. Default is an empty list
-# extra_domain_name_servers =
-
-# Domain to use for building the hostnames
-# domain_name = openstacklocal
-
-# Default DHCP lease time
-# default_lease_time = 43200
-
-[nsx_metadata]
-# IP address used by Metadata server
-# metadata_server_address = 127.0.0.1
-
-# TCP Port used by Metadata server
-# metadata_server_port = 8775
-
-# When proxying metadata requests, Neutron signs the Instance-ID header with a
-# shared secret to prevent spoofing. You may select any string for a secret,
-# but it MUST match with the configuration used by the Metadata server
-# metadata_shared_secret =
Code Review / openstack-build / neutron-build.git / commitdiff