X-Git-Url: https://review.fuel-infra.org/gitweb?a=blobdiff_plain;f=rpm%2FSOURCES%2Fneutron-server-setup;fp=rpm%2FSOURCES%2Fneutron-server-setup;h=0000000000000000000000000000000000000000;hb=30a9554653185df20feb9c71db5b3c5bd3da3092;hp=268c64c1189048910ee30e654e20d65e340ae120;hpb=f07bdce2ad538aab3201d467e8b530e270cbcbf3;p=openstack-build%2Fneutron-build.git

diff --git a/rpm/SOURCES/neutron-server-setup b/rpm/SOURCES/neutron-server-setup
deleted file mode 100755
index 268c64c11..000000000
--- a/rpm/SOURCES/neutron-server-setup
+++ /dev/null
@@ -1,376 +0,0 @@
-#!/bin/bash
-#
-# Copyright (C) 2012, Red Hat, Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
-#
-
-# The script supports the plugins below
-declare -a SUPPORTED_PLUGINS=(linuxbridge openvswitch)
-
-#
-# Print --help output and exit.
-#
-usage() {
-
-cat << EOF
-The helper script will install the necessary database support for the selected plugin.
-Please note that some plugins do not require database support. These are addressed in the script.
-The setup of MySQL with a multi-server OpenStack installation is outside of the scope of 
-this simple helper script.
-
-Usage: neutron-server-setup [options]
-Options:
-	--help        | -h
-		Print usage information.
-        --qpw <pw>    | -q <pw>
-                Specify the password for the 'neutron' MySQL user that neutron will
-                use to connect to the 'neutron' MySQL database.  By default,
-                the password 'neutron' will be used.
-
-	--rootpw <pw> | -r <pw>
-		Specify the root MySQL password.  If the script installs
-		the MySQL server, it will set the root password to this value
-		instead of prompting for a password.  If the MySQL server is
-		already installed, this password will be used to connect to the
-		database instead of having to prompt for it.
-	--yes         | -y
-		In cases where the script would normally ask for confirmation
-		before doing something, such as installing mysql-server,
-		just assume yes.  This is useful if you want to run the script
-		non-interactively.
-        --user        | -u
-		The neutron user. 
-        --plugin      | -p
-                The neutron plugin. Supported plugins:-
-                    ${SUPPORTED_PLUGINS[*]}
-EOF
-
-	exit 0
-}
-
-install_mysql_server() {
-	if [ -z "${ASSUME_YES}" ] ; then
-		yum install mysql-server
-	else
-		yum install -y mysql-server
-	fi
-}
-
-start_mysql_server() {
-	service mysqld start
-}
-
-is_valid_plugin() {
-	local i=
-	for i in "${SUPPORTED_PLUGINS[@]}"; do
-		if [ "$i" == "$1" ]; then
-			return 0 
-		fi
-	done
-	return 1
-}
-
-ASSUME_YES=""
-NEUTRON_USER=neutron
-MYSQL_Q_PW=neutron
-Q_CONF=/etc/neutron/neutron.conf
-LB_CONF=/etc/neutron/plugins/linuxbridge/linuxbridge_conf.ini
-OVS_CONF=/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini
-Q_HOST='localhost'
-Q_PORT=9696
-
-# Keystone specific
-OS_USERNAME=${OS_USERNAME:-neutron}
-OS_PASSWORD=${OS_PASSWORD:-servicepass}
-OS_AUTH_URL=${OS_AUTH_URL:-http://127.0.0.1:35357/v2.0/}
-OS_TENANT_NAME=${OS_TENANT_NAME:-service}
-
-# Nova specific
-NOVA_CONF=/etc/nova/nova.conf
-SCHEDULER_DRIVER=""
-
-while [ $# -gt 0 ]
-do
-	case "$1" in
-		-h|--help)
-			usage
-			;;
-		-q|--qpw)
-			shift
-			MYSQL_Q_PW==${1}
-			;;
-		-r|--rootpw)
-			shift
-			MYSQL_ROOT_PW=${1}
-			;;
-		-y|--yes)
-			ASSUME_YES="yes"
-			;;
-                -u|--user)
-                        shift
-                        NEUTRON_USER=${1}
-                        ;;
-                -p|--plugin)
-                        shift
-                        NEUTRON_PLUGIN=${1}
-                        ;;
-		*)
-			# ignore
-			shift
-			;;
-	esac
-	shift
-done
-
-# if the plugin is not defined
-if [ -z ${NEUTRON_PLUGIN} ] ; then
-        echo "Please select a plugin from: ${SUPPORTED_PLUGINS[*]}"
-	echo "Choice:"
-        read NEUTRON_PLUGIN
-fi
-
-# check that the plugin is valid
-is_valid_plugin ${NEUTRON_PLUGIN}
-if [ $? -ne 0 ]; then
-	echo "Plugin '${NEUTRON_PLUGIN}' not supported. Supported plugins:-"
-	echo "    ${SUPPORTED_PLUGINS[*]}"
-	exit 0
-fi
-
-echo "Neutron plugin: ${NEUTRON_PLUGIN}"
-
-if ! [ -e "${Q_CONF}" ]; then
-	echo "Please install the neutron package"
-	exit 0
-fi
-
-if ! [ -e "/etc/neutron/plugins/${NEUTRON_PLUGIN}" ]; then
-	echo "Please install the ${NEUTRON_PLUGIN} neutron plugin"
-        exit 0
-fi
-
-case "${NEUTRON_PLUGIN}" in
-"linuxbridge")
-	DB_NAME="neutron_linux_bridge"
-        Q_PLUGIN_CLASS="neutron.plugins.linuxbridge.lb_neutron_plugin.LinuxBridgePluginV2"
-;;
-
-"openvswitch")
-	if ! rpm -q --whatprovides openvswitch > /dev/null 
-	then
-		echo "Please install openvswitch"
-		exit 0
-	fi
-	DB_NAME="ovs_neutron"
-        Q_PLUGIN_CLASS="neutron.plugins.openvswitch.ovs_neutron_plugin.OVSNeutronPluginV2"
-;;
-esac
-
-# Update neutron.conf
-# Plugin
-openstack-config --set ${Q_CONF} DEFAULT core_plugin $Q_PLUGIN_CLASS
-# QPID
-openstack-config --set ${Q_CONF} DEFAULT rpc_backend neutron.openstack.common.rpc.impl_qpid
-openstack-config --set ${Q_CONF} DEFAULT qpid_hostname localhost
-# Authentication
-openstack-config --set ${Q_CONF} DEFAULT auth_strategy keystone
-
-openstack-config --del ${Q_CONF} keystone_authtoken admin_tenant_name
-openstack-config --del ${Q_CONF} keystone_authtoken admin_user
-openstack-config --del ${Q_CONF} keystone_authtoken admin_password
-
-openstack-config --set ${Q_CONF} keystone_authtoken admin_tenant_name ${OS_TENANT_NAME}
-openstack-config --set ${Q_CONF} keystone_authtoken admin_user ${OS_USERNAME}
-openstack-config --set ${Q_CONF} keystone_authtoken admin_password ${OS_PASSWORD}
-
-echo "Plugin: ${NEUTRON_PLUGIN} => Database: ${DB_NAME}"
-
-# Make sure MySQL is installed.
-
-NEW_MYSQL_INSTALL=0
-if ! rpm -q --whatprovides mysql-server > /dev/null
-then
-	if [ -z "${ASSUME_YES}" ] ; then
-		printf "mysql-server is not installed.  Would you like to install it now? (y/n): "
-		read response
-		case "$response" in
-			y|Y)
-				;;
-			n|N)
-				echo "mysql-server must be installed.  Please install it before proceeding."
-				exit 0
-				;;
-			*)
-				echo "Invalid response."
-				exit 1
-		esac
-	fi
-
-	NEW_MYSQL_INSTALL=1
-	install_mysql_server
-fi
-
-
-# Make sure mysqld is running.
-
-if ! service mysqld status > /dev/null
-then
-	if [ -z "${ASSUME_YES}" ] ; then
-		printf "mysqld is not running.  Would you like to start it now? (y/n): "
-		read response
-		case "$response" in
-			y|Y)
-				;;
-			n|N)
-				echo "mysqld must be running.  Please start it before proceeding."
-				exit 0
-				;;
-			*)
-				echo "Invalid response."
-				exit 1
-		esac
-	fi
-
-	start_mysql_server
-
-	# If we both installed and started, ensure it starts at boot
-	[ $NEW_MYSQL_INSTALL -eq 1 ] && chkconfig mysqld on
-fi
-
-# Get MySQL root access.
-if [ $NEW_MYSQL_INSTALL -eq 1 ]
-then
-	if [ ! "${MYSQL_ROOT_PW+defined}" ] ; then
-		echo "Since this is a fresh installation of MySQL, please set a password for the 'root' mysql user."
-
-		PW_MATCH=0
-		while [ $PW_MATCH -eq 0 ]
-		do
-			printf "Enter new password for 'root' mysql user: "
-			read -s MYSQL_ROOT_PW
-			echo
-			printf "Enter new password again: "
-			read -s PW2
-			echo
-			if [ "${MYSQL_ROOT_PW}" = "${PW2}" ] ; then
-				PW_MATCH=1
-			else
-				echo "Passwords did not match."
-			fi
-		done
-	fi
-
-	echo "UPDATE mysql.user SET password = password('${MYSQL_ROOT_PW}') WHERE user = 'root'; DELETE FROM mysql.user WHERE user = ''; flush privileges;" | mysql -u root
-	if ! [ $? -eq 0 ] ; then
-		echo "Failed to set password for 'root' MySQL user."
-		exit 1
-	fi
-elif [ ! "${MYSQL_ROOT_PW+defined}" ] ; then
-	printf "Please enter the password for the 'root' MySQL user: "
-	read -s MYSQL_ROOT_PW
-	echo
-fi
-
-# Sanity check MySQL credentials.
-
-MYSQL_ROOT_PW_ARG=""
-if [ "${MYSQL_ROOT_PW+defined}" ]
-then
-	MYSQL_ROOT_PW_ARG="--password=${MYSQL_ROOT_PW}"
-fi
-echo "SELECT 1;" | mysql -u root ${MYSQL_ROOT_PW_ARG} > /dev/null
-if ! [ $? -eq 0 ]
-then
-	echo "Failed to connect to the MySQL server.  Please check your root user credentials."
-	exit 1
-fi
-echo "Verified connectivity to MySQL."
-
-# Create a database user - check if it does not exist prior
-USER_EXISTS=$(mysql -u root ${MYSQL_ROOT_PW_ARG} -e "SELECT user FROM mysql.user WHERE user='${NEUTRON_USER}'"|grep ${NEUTRON_USER} | wc -l)
-if [ ${USER_EXISTS} -ne 0 ]; then
-	echo "User ${NEUTRON_USER} already exists"
-else
-	mysql -u root ${MYSQL_ROOT_PW_ARG} -e "create user '${NEUTRON_USER}'@'%' identified by '${MYSQL_Q_PW}'"
-	mysql -u root ${MYSQL_ROOT_PW_ARG} -e "create user '${NEUTRON_USER}'@'localhost' identified by '${MYSQL_Q_PW}'"
-fi
-
-#create database
-DB_EXISTS=$(mysql -u root ${MYSQL_ROOT_PW_ARG} -e "show databases"|grep ${DB_NAME}| wc -l)
-if [ ${DB_EXISTS} -ne 0 ]; then
-	mysql -u root ${MYSQL_ROOT_PW_ARG} -e "drop database ${DB_NAME}"
-fi
-mysql -u root ${MYSQL_ROOT_PW_ARG} -e "create database ${DB_NAME}"
-
-# Configure database specifics
-case "${NEUTRON_PLUGIN}" in
-"linuxbridge")
-	mysql -u root ${MYSQL_ROOT_PW_ARG} -e "grant all on neutron_linux_bridge.* to '${NEUTRON_USER}'@'%'"
-	mysql -u root ${MYSQL_ROOT_PW_ARG} -e "grant all on neutron_linux_bridge.* to '${NEUTRON_USER}'@'localhost'"
-	openstack-config --set ${LB_CONF} DATABASE sql_connection mysql://${NEUTRON_USER}:${MYSQL_Q_PW}@`hostname`/neutron_linux_bridge
-	
-	echo "Please enter network device for VLAN trunking:"
-	read NETWORK_DEVICE
-        openstack-config --set ${LB_CONF} LINUX_BRIDGE physical_interface ${NETWORK_DEVICE}
-
-	ln -s ${LB_CONF} /etc/neutron/plugin.ini
-;;
-
-"openvswitch")
-	mysql -u root ${MYSQL_ROOT_PW_ARG} -e "grant all on ovs_neutron.* to '${NEUTRON_USER}'@'%'"
-	mysql -u root ${MYSQL_ROOT_PW_ARG} -e "grant all on ovs_neutron.* to '${NEUTRON_USER}'@'localhost'"
-        openstack-config --set ${OVS_CONF} DATABASE sql_connection mysql://${NEUTRON_USER}:${MYSQL_Q_PW}@`hostname`/ovs_neutron
-        openstack-config --set ${OVS_CONF} SECURITYGROUP firewall_driver neutron.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver
-	ln -s ${OVS_CONF} /etc/neutron/plugin.ini
-;;
-esac
-
-if [ -z "${ASSUME_YES}" ] ; then
-    echo "Would you like to update the nova configuration files? (y/n): "
-    read response
-    case "$response" in
-    y|Y)
-    	;;
-    *)
-    	echo "Complete!"
-    	exit 0
-    esac
-fi
-
-# If OpenStack is installed then configure nova.conf
-if ! [ -e "${NOVA_CONF}" ]; then
-        echo "Please install OpenStack compute and then set the values"
-	echo "in /etc/nova/nova.conf DEFAULT section"
-        echo "    network_api_classi=nova.network.neutronv2.api.API"
-        echo "    neutron_admin_username=${OS_USERNAME}"
-        echo "    neutron_admin_password=${OS_PASSWORD}"
-        echo "    neutron_admin_auth_url=${OS_AUTH_URL}"
-        echo "    neutron_auth_strategy=keystone"
-        echo "    neutron_admin_tenant_name=${OS_TENANT_NAME}"
-        echo "    neutron_url=http://${Q_HOST}:${Q_PORT}/"
-        echo "    firewall_driver=nova.virt.firewall.NoopFirewallDriver"
-        echo "    security_group_api=neutron"
-else
-        openstack-config --set ${NOVA_CONF} DEFAULT network_api_class nova.network.neutronv2.api.API
-        openstack-config --set ${NOVA_CONF} DEFAULT neutron_admin_username ${OS_USERNAME}
-        openstack-config --set ${NOVA_CONF} DEFAULT neutron_admin_password ${OS_PASSWORD}
-        openstack-config --set ${NOVA_CONF} DEFAULT neutron_admin_auth_url ${OS_AUTH_URL}
-        openstack-config --set ${NOVA_CONF} DEFAULT neutron_auth_strategy keystone 
-        openstack-config --set ${NOVA_CONF} DEFAULT neutron_admin_tenant_name ${OS_TENANT_NAME}
-        openstack-config --set ${NOVA_CONF} DEFAULT neutron_url http://${Q_HOST}:${Q_PORT}/
-        openstack-config --set ${NOVA_CONF} DEFAULT firewall_driver nova.virt.firewall.NoopFirewallDriver
-        openstack-config --set ${NOVA_CONF} DEFAULT security_group_api neutron
-fi
-
-echo "Configuration updates complete!"