X-Git-Url: https://review.fuel-infra.org/gitweb?a=blobdiff_plain;f=cirros-testvm%2Fsrc-cirros%2Fbuildroot-2015.05%2Fboot%2Flpc32xxcdl%2Flpc32xxcdl-2.11-delete_redundant_files.patch;fp=cirros-testvm%2Fsrc-cirros%2Fbuildroot-2015.05%2Fboot%2Flpc32xxcdl%2Flpc32xxcdl-2.11-delete_redundant_files.patch;h=39966f01e9f01533b497f923f687736f225b2edd;hb=b0a0f15dfaa205161a7fcb20cf1b8cd4948c2ef3;hp=0000000000000000000000000000000000000000;hpb=c6ac3cd55ee2da956195eee393b0882105dfad4e;p=packages%2Ftrusty%2Fcirros-testvm.git diff --git a/cirros-testvm/src-cirros/buildroot-2015.05/boot/lpc32xxcdl/lpc32xxcdl-2.11-delete_redundant_files.patch b/cirros-testvm/src-cirros/buildroot-2015.05/boot/lpc32xxcdl/lpc32xxcdl-2.11-delete_redundant_files.patch new file mode 100644 index 0000000..39966f0 --- /dev/null +++ b/cirros-testvm/src-cirros/buildroot-2015.05/boot/lpc32xxcdl/lpc32xxcdl-2.11-delete_redundant_files.patch @@ -0,0 +1,969 @@ +Remove duplicated files to stop the linker from complaining about duplicate +symbols + +Signed-off-by: Alexandre Belloni +--- +--- a/csps/lpc32xx/bsps/fdi3250/startup/examples/s1l/sysapi_timer.c 2011-10-05 19:10:37.000000000 +0200 ++++ /dev/null 2012-01-01 16:39:47.918907000 +0100 +@@ -1,212 +0,0 @@ +-/*********************************************************************** +- * $Id:: sysapi_timer.c 3394 2010-05-06 17:56:27Z usb10132 $ +- * +- * Project: Time support functions +- * +- * Description: +- * Implements the following functions required for the S1L API +- * time_init +- * time_reset +- * time_start +- * time_stop +- * time_get +- * time_get_rate +- * +- *********************************************************************** +- * Software that is described herein is for illustrative purposes only +- * which provides customers with programming information regarding the +- * products. This software is supplied "AS IS" without any warranties. +- * NXP Semiconductors assumes no responsibility or liability for the +- * use of the software, conveys no license or title under any patent, +- * copyright, or mask work right to the product. NXP Semiconductors +- * reserves the right to make changes in the software without +- * notification. NXP Semiconductors also make no representation or +- * warranty that such application will be suitable for the specified +- * use without further testing or modification. +- **********************************************************************/ +- +-#include "s1l_sys_inf.h" +-#include "lpc32xx_intc_driver.h" +-#include "lpc32xx_timer_driver.h" +- +-static UNS_64 base_rate; +-static INT_32 tdev = 0; +- +-/*********************************************************************** +- * +- * Function: time_init +- * +- * Purpose: Initializes time system +- * +- * Processing: Initializes the system timer. +- * +- * Parameters: None +- * +- * Outputs: None +- * +- * Returns: 0 if the init failed, otherwise non-zero +- * +- * Notes: None +- * +- **********************************************************************/ +-INT_32 time_init(void) +-{ +- TMR_PSCALE_SETUP_T pscale; +- +- /* Open timer driver */ +- if (tdev == 0) +- { +- tdev = timer_open((void *) TIMER_CNTR0, 0); +- if (tdev != 0) +- { +- /* Use a prescale count to 100000 */ +- pscale.ps_tick_val = 100000; +- pscale.ps_us_val = 0; /* Not needed when ps_tick_val != 0 */ +- timer_ioctl(tdev, TMR_SETUP_PSCALE, (INT_32) &pscale); +- +- /* Get timer clock rate */ +- base_rate = (UNS_64) timer_ioctl(tdev, TMR_GET_STATUS, +- TMR_GET_CLOCK); +- } +- } +- +- return tdev; +-} +- +-/*********************************************************************** +- * +- * Function: time_reset +- * +- * Purpose: Resets system timer +- * +- * Processing: +- * See function. +- * +- * Parameters: None +- * +- * Outputs: None +- * +- * Returns: Nothing +- * +- * Notes: None +- * +- **********************************************************************/ +-void time_reset(void) +-{ +- if (tdev != 0) +- { +- timer_ioctl(tdev, TMR_RESET, 1); +- } +-} +- +-/*********************************************************************** +- * +- * Function: time_start +- * +- * Purpose: Starts system timer +- * +- * Processing: +- * See function. +- * +- * Parameters: None +- * +- * Outputs: None +- * +- * Returns: Nothing +- * +- * Notes: None +- * +- **********************************************************************/ +-void time_start(void) +-{ +- if (tdev != 0) +- { +- timer_ioctl(tdev, TMR_ENABLE, 1); +- } +-} +- +-/*********************************************************************** +- * +- * Function: time_stop +- * +- * Purpose: Stops system timer +- * +- * Processing: +- * See function. +- * +- * Parameters: None +- * +- * Outputs: None +- * +- * Returns: Nothing +- * +- * Notes: None +- * +- **********************************************************************/ +-void time_stop(void) +-{ +- if (tdev != 0) +- { +- timer_ioctl(tdev, TMR_ENABLE, 0); +- } +-} +- +-/*********************************************************************** +- * +- * Function: time_get +- * +- * Purpose: Returns current system time value +- * +- * Processing: +- * See function. +- * +- * Parameters: None +- * +- * Outputs: None +- * +- * Returns: The number of ticks of the timer counter +- * +- * Notes: None +- * +- **********************************************************************/ +-UNS_64 time_get(void) +-{ +- TMR_COUNTS_T tcounts; +- UNS_64 ticks = 0; +- +- if (tdev != 0) +- { +- timer_ioctl(tdev, TMR_GET_COUNTS, (INT_32) &tcounts); +- +- /* Compute number of timer ticks */ +- ticks = (UNS_64) tcounts.count_val * 100000; +- ticks = ticks + (UNS_64) tcounts.ps_count_val; +- } +- +- return ticks; +-} +- +-/*********************************************************************** +- * +- * Function: time_get_rate +- * +- * Purpose: +- * Returns base tick rate (ticks per second) of the time counter +- * +- * Processing: +- * See function. +- * +- * Parameters: None +- * +- * Outputs: None +- * +- * Returns: The timer tick rate (in ticks per second) +- * +- * Notes: None +- * +- **********************************************************************/ +-UNS_64 time_get_rate(void) +-{ +- return base_rate; +-} +- +--- a/csps/lpc32xx/bsps/fdi3250/startup/examples/s1l/sys_mmu_cmd_group.c 2011-10-05 19:10:37.000000000 +0200 ++++ /dev/null 2012-01-01 16:39:47.918907000 +0100 +@@ -1,746 +0,0 @@ +-/*********************************************************************** +- * $Id:: sys_mmu_cmd_group.c 3430 2010-05-07 17:39:08Z usb10132 $ +- * +- * Project: Command processor for peek, poke, dump, and fill +- * +- * Description: +- * Processes commands from the command prompt +- * +- *********************************************************************** +- * Software that is described herein is for illustrative purposes only +- * which provides customers with programming information regarding the +- * products. This software is supplied "AS IS" without any warranties. +- * NXP Semiconductors assumes no responsibility or liability for the +- * use of the software, conveys no license or title under any patent, +- * copyright, or mask work right to the product. NXP Semiconductors +- * reserves the right to make changes in the software without +- * notification. NXP Semiconductors also make no representation or +- * warranty that such application will be suitable for the specified +- * use without further testing or modification. +- **********************************************************************/ +- +-#include "lpc_arm922t_cp15_driver.h" +-#include "lpc_string.h" +-#include "startup.h" +-#include "s1l_cmds.h" +-#include "s1l_sys_inf.h" +- +-/* dcache command */ +-BOOL_32 cmd_dcache(void); +-static UNS_32 cmd_dcache_plist[] = +-{ +- (PARSE_TYPE_STR), /* The "dcache" command */ +- (PARSE_TYPE_DEC | PARSE_TYPE_END) +-}; +-static CMD_ROUTE_T core_dcache_cmd = +-{ +- (UNS_8 *) "dcache", +- cmd_dcache, +- (UNS_8 *) "Enables, disables, or flushes data cache", +- (UNS_8 *) "dcache [0(disable), 1(enable), 2(flush)]", +- cmd_dcache_plist, +- NULL +-}; +- +-/* icache command */ +-BOOL_32 cmd_icache(void); +-static UNS_32 cmd_icache_plist[] = +-{ +- (PARSE_TYPE_STR), /* The "icache" command */ +- (PARSE_TYPE_DEC | PARSE_TYPE_END) +-}; +-static CMD_ROUTE_T core_icache_cmd = +-{ +- (UNS_8 *) "icache", +- cmd_icache, +- (UNS_8 *) "Enables or disables instruction cache", +- (UNS_8 *) "icache [0(disable), 1(enable)]", +- cmd_icache_plist, +- NULL +-}; +- +-/* inval command */ +-BOOL_32 cmd_inval(void); +-static UNS_32 cmd_inval_plist[] = +-{ +- (PARSE_TYPE_STR | PARSE_TYPE_END) /* The "inval" command */ +-}; +-static CMD_ROUTE_T core_inval_cmd = +-{ +- (UNS_8 *) "inval", +- cmd_inval, +- (UNS_8 *) "Flushes data cache and invalidates instruction cache", +- (UNS_8 *) "inval", +- cmd_inval_plist, +- NULL +-}; +- +-/* mmuenab command */ +-BOOL_32 cmd_mmuenab(void); +-static UNS_32 cmd_mmuenab_plist[] = +-{ +- (PARSE_TYPE_STR), /* The "mmuenab" command */ +- (PARSE_TYPE_DEC | PARSE_TYPE_END) +-}; +-static CMD_ROUTE_T core_mmuenab_cmd = +-{ +- (UNS_8 *) "mmuenab", +- cmd_mmuenab, +- (UNS_8 *) "Enables or disables the MMU", +- (UNS_8 *) "mmuenab [0(disable), 1(enable)]", +- cmd_mmuenab_plist, +- NULL +-}; +- +-/* map command */ +-BOOL_32 cmd_map(void); +-static UNS_32 cmd_map_plist[] = +-{ +- (PARSE_TYPE_STR), /* The "map" command */ +- (PARSE_TYPE_HEX), +- (PARSE_TYPE_HEX), +- (PARSE_TYPE_DEC), +- (PARSE_TYPE_DEC | PARSE_TYPE_END), +-}; +-static CMD_ROUTE_T core_map_cmd = +-{ +- (UNS_8 *) "map", +- cmd_map, +- (UNS_8 *) "Maps a range of physical address sections to virtual addresses", +- (UNS_8 *) "map [virt hex addr][phy hex addr][sections][0(uncached), 1(cached), 2(unmap)]", +- cmd_map_plist, +- NULL +-}; +- +-/* mmuinfo command */ +-static BOOL_32 cmd_mmuinfo(void); +-static UNS_32 cmd_mmuinfo_plist[] = +-{ +- (PARSE_TYPE_STR | PARSE_TYPE_END) /* The "mmuinfo" command */ +-}; +-static CMD_ROUTE_T core_mmuinfo_cmd = +-{ +- (UNS_8 *) "mmuinfo", +- cmd_mmuinfo, +- (UNS_8 *) "Dumps page table and MMU info", +- (UNS_8 *) "mmuinfo", +- cmd_mmuinfo_plist, +- NULL +-}; +- +-/* MMU group */ +-static GROUP_LIST_T mmu_group = +-{ +- (UNS_8 *) "mmu", /* mmu group */ +- (UNS_8 *) "MMU command group", +- NULL, +- NULL +-}; +- +-static UNS_8 enabled_msg [] =" enabled"; +-static UNS_8 disabled_msg [] =" disabled"; +-static UNS_8 dcache_msg[] = "Data cache"; +-static UNS_8 icache_msg[] = "Instruction cache"; +-static UNS_8 pagetab_msg[] = "Page table at address: "; +-static UNS_8 slist_msg[] = "Type Virt Phy fl Size"; +-static UNS_8 mmu_msg [] ="MMU"; +-static UNS_8 cpage_msg[] = "Coarse page:"; +-static UNS_8 fpage_msg[] = "Fine page :"; +-static UNS_8 sect_msg[] = "Section :"; +-static UNS_8 mbytes_msg[] = "M"; +-static UNS_8 map1_err_msg[] = +- "Error : section addresses must be aligned on a 32-bit boundary"; +-static UNS_8 map2_err_msg[] = +- "Error : Number of sections exceeds address range of device"; +-static UNS_8 phya_msg[] = "Virtual address "; +-static UNS_8 mapped_msg[] = " mapped to physical address "; +-static UNS_8 unmapped_msg[] = " unmapped from physical address "; +-static UNS_8 cached_msg[] = " (cached)"; +-static UNS_8 inval_msg[] = " invalidated"; +-static UNS_8 caches_msg [] ="Caches"; +-static UNS_8 flushed_msg[] = " flushed"; +- +-/*********************************************************************** +- * +- * Function: show_section +- * +- * Purpose: Display section information +- * +- * Processing: +- * See function. +- * +- * Parameters: +- * mmu_reg : MMU settings for this section +- * virt_addr : Starting virtual address for this section +- * segs : Number of 1M segments for this section +- * +- * Outputs: None +- * +- * Returns: Nothing +- * +- * Notes: None +- * +- **********************************************************************/ +-static void show_section(UNS_32 mmu_reg, +- UNS_32 virt_addr, +- UNS_32 segs) +-{ +- UNS_8 straddr [16]; +- UNS_32 mmu_phy; +- +- if ((mmu_reg & ARM922T_L1D_TYPE_PG_SN_MASK) != +- ARM922T_L1D_TYPE_FAULT) +- { +- if ((mmu_reg & ARM922T_L1D_TYPE_PG_SN_MASK) == +- ARM922T_L1D_TYPE_CPAGE) +- { +- term_dat_out(cpage_msg); +- } +- else if ((mmu_reg & ARM922T_L1D_TYPE_PG_SN_MASK) == +- ARM922T_L1D_TYPE_FPAGE) +- { +- term_dat_out(fpage_msg); +- } +- else +- { +- term_dat_out(sect_msg); +- } +- +- /* Compute virtual address */ +- str_makehex(straddr, virt_addr, 8); +- term_dat_out(straddr); +- term_dat_out((UNS_8 *) " "); +- +- /* Compute mapped physical address */ +- if ((mmu_reg & ARM922T_L1D_TYPE_PG_SN_MASK) == +- ARM922T_L1D_TYPE_SECTION) +- { +- mmu_phy = mmu_reg & 0xFFF00000; +- } +- else +- { +- /* Don't compute addresses for non-sections */ +- mmu_phy = 0; +- } +- str_makehex(straddr, mmu_phy, 8); +- term_dat_out(straddr); +- term_dat_out((UNS_8 *) " "); +- +- /* MMU flags */ +- if ((mmu_reg & ARM922T_L1D_BUFFERABLE) != 0) +- { +- term_dat_out((UNS_8 *) "b"); +- } +- else +- { +- term_dat_out((UNS_8 *) " "); +- } +- if ((mmu_reg & ARM922T_L1D_CACHEABLE) != 0) +- { +- term_dat_out((UNS_8 *) "c"); +- } +- else +- { +- term_dat_out((UNS_8 *) " "); +- } +- term_dat_out((UNS_8 *) " "); +- +- /* Displays used megabytes */ +- str_makedec(straddr, segs); +- term_dat_out(straddr); +- term_dat_out_crlf(mbytes_msg); +- } +-} +- +-/*********************************************************************** +- * +- * Function: mmu_dumpinfo +- * +- * Purpose: Display MMU info +- * +- * Processing: +- * Display the MMU information, including enable status, cache +- * status, and page table. +- * +- * Parameters: None +- * +- * Outputs: None +- * +- * Returns: TRUE if the command was processed, otherwise FALSE +- * +- * Notes: None +- * +- **********************************************************************/ +-static BOOL_32 mmu_dumpinfo(void) +-{ +- UNS_32 segsz, last_mmu_reg, mmu_vrt, mmu_reg, mmu_vrtsav = 0, *pt; +- UNS_32 mlast_mmu_reg, mmmu_reg; +- int idx; +- UNS_8 hexaddr [16]; +- +- term_dat_out(mmu_msg); +- if (cp15_mmu_enabled() == FALSE) +- { +- term_dat_out_crlf(disabled_msg); +- } +- else +- { +- term_dat_out_crlf(enabled_msg); +- +- /* Get MMU control register word */ +- mmu_reg = cp15_get_mmu_control_reg(); +- +- /* Instruction cache status */ +- term_dat_out(icache_msg); +- if ((mmu_reg & ARM922T_MMU_CONTROL_I) == 0) +- { +- term_dat_out_crlf(disabled_msg); +- } +- else +- { +- term_dat_out_crlf(enabled_msg); +- } +- +- /* Data cache status */ +- term_dat_out(dcache_msg); +- if ((mmu_reg & ARM922T_MMU_CONTROL_C) == 0) +- { +- term_dat_out_crlf(disabled_msg); +- } +- else +- { +- term_dat_out_crlf(enabled_msg); +- } +- +- term_dat_out(pagetab_msg); +- mmu_reg = (UNS_32) cp15_get_ttb(); +- str_makehex(hexaddr, mmu_reg, 8); +- term_dat_out_crlf(hexaddr); +- term_dat_out_crlf(slist_msg); +- +- /* Process MMU table - assume that the physical and +- virtual locations of table are the same */ +- pt = (UNS_32 *) mmu_reg; +- mmu_vrt = 0x0; +- segsz = 0xFFFFFFFF; +- last_mmu_reg = mlast_mmu_reg = 0xFFFFFFFF; +- for (idx = 0; idx < 4096; idx++) +- { +- mmu_reg = *pt; +- mmmu_reg = (mmu_reg & (ARM922T_L1D_TYPE_PG_SN_MASK | +- ARM922T_L1D_BUFFERABLE | ARM922T_L1D_CACHEABLE)); +- segsz = segsz + 1; +- +- if ((last_mmu_reg != 0xFFFFFFFF) && +- (mlast_mmu_reg != mmmu_reg)) +- { +- show_section(last_mmu_reg, mmu_vrtsav, segsz); +- segsz = 0; +- } +- +- if (mlast_mmu_reg != mmmu_reg) +- { +- mmu_vrtsav = mmu_vrt; +- last_mmu_reg = mmu_reg; +- mlast_mmu_reg = mmmu_reg; +- } +- +- pt++; +- mmu_vrt += 0x00100000; +- } +- } +- +- return TRUE; +-} +- +-/*********************************************************************** +- * +- * Function: mmu_dumpmap +- * +- * Purpose: Map a virtual address range to a physical range +- * +- * Processing: +- * From the input addresses and number of sections, generate the +- * appropriate entries in the page table. +- * +- * Parameters: None +- * +- * Outputs: None +- * +- * Returns: TRUE if the command was processed, otherwise FALSE +- * +- * Notes: None +- * +- **********************************************************************/ +-static BOOL_32 mmu_dumpmap(UNS_32 vrt, +- UNS_32 phy, +- UNS_32 sections, +- UNS_32 cache) +-{ +- BOOL_32 processed = FALSE; +- UNS_32 mmu_phy, mmu_vrt, tmp1 = 0, tmp2, *pt; +- UNS_8 hexaddr [16]; +- +- /* Verify address boundaries are sectional */ +- mmu_vrt = vrt & ~ARM922T_L2D_SN_BASE_MASK; +- mmu_phy = phy & ~ARM922T_L2D_SN_BASE_MASK; +- if ((mmu_vrt != 0) || (mmu_phy != 0)) +- { +- term_dat_out_crlf(map1_err_msg); +- } +- else +- { +- /* Verify that address range and section count will not +- exceed address range of device */ +- tmp1 = vrt >> 20; +- tmp1 = (tmp1 + sections) - 1; +- tmp2 = phy >> 20; +- tmp2 = (tmp2 + sections) - 1; +- if ((tmp1 < 4096) && (tmp2 < 4096)) +- { +- /* Good address range and good section count */ +- processed = TRUE; +- } +- else +- { +- term_dat_out_crlf(map2_err_msg); +- } +- } +- +- /* Generate static part of MMU word */ +- if (cache == 0) +- { +- /* Section mapped with cache disabled */ +- tmp1 = ARM922T_L1D_TYPE_SECTION; +- } +- else if (cache == 1) +- { +- /* Section mapped with cache enabled */ +- tmp1 = (ARM922T_L1D_BUFFERABLE | ARM922T_L1D_CACHEABLE | +- ARM922T_L1D_TYPE_SECTION); +- } +- else if (cache == 2) +- { +- /* Section unmapped */ +- tmp1 = ARM922T_L1D_TYPE_FAULT; +- } +- tmp1 |= ARM922T_L1D_AP_ALL; +- +- /* Offset into page table for virtual address */ +- tmp2 = (vrt >> 20); +- pt = cp15_get_ttb() + tmp2; +- +- /* Loop until all sections are complete */ +- while ((sections > 0) && (processed == TRUE)) +- { +- /* Add in physical address */ +- tmp2 = tmp1 | (phy & ARM922T_L2D_SN_BASE_MASK); +- +- /* Save new section descriptor for virtual address */ +- *pt = tmp2; +- +- /* Output message shown the map */ +- term_dat_out(phya_msg); +- str_makehex(hexaddr, phy, 8); +- term_dat_out(hexaddr); +- if (cache == 2) +- { +- term_dat_out(unmapped_msg); +- } +- else +- { +- term_dat_out(mapped_msg); +- } +- str_makehex(hexaddr, vrt, 8); +- term_dat_out(hexaddr); +- if (cache == 1) +- { +- term_dat_out(cached_msg); +- } +- term_dat_out_crlf((UNS_8 *) ""); +- +- /* Next section and page table entry*/ +- phy += 0x00100000; +- vrt += 0x00100000; +- pt++; +- sections--; +- } +- +- return processed; +-} +- +-/*********************************************************************** +- * +- * Function: cmd_mmuinfo +- * +- * Purpose: Display MMU information +- * +- * Processing: +- * See function. +- * +- * Parameters: None +- * +- * Outputs: None +- * +- * Returns: TRUE if the command was processed, otherwise FALSE +- * +- * Notes: None +- * +- **********************************************************************/ +-static BOOL_32 cmd_mmuinfo(void) +-{ +- mmu_dumpinfo(); +- +- return TRUE; +-} +- +-/*********************************************************************** +- * +- * Function: cmd_map +- * +- * Purpose: Map a physical address region to a virtual region +- * +- * Processing: +- * See function. +- * +- * Parameters: None +- * +- * Outputs: None +- * +- * Returns: TRUE if the command was processed, otherwise FALSE +- * +- * Notes: None +- * +- **********************************************************************/ +-BOOL_32 cmd_map(void) +-{ +- UNS_32 phy, virt, sects, ce = 0; +- +- /* Get arguments */ +- virt = cmd_get_field_val(1); +- phy = cmd_get_field_val(2); +- sects = cmd_get_field_val(3); +- ce = cmd_get_field_val(4); +- +- if (ce <= 2) +- { +- mmu_dumpmap(virt, phy, sects, ce); +- } +- +- return TRUE; +-} +- +-/*********************************************************************** +- * +- * Function: cmd_inval +- * +- * Purpose: MMU cache flush and invalidate +- * +- * Processing: +- * See function. +- * +- * Parameters: None +- * +- * Outputs: None +- * +- * Returns: TRUE if the command was processed, otherwise FALSE +- * +- * Notes: None +- * +- **********************************************************************/ +-BOOL_32 cmd_inval(void) +-{ +- dcache_flush(); +- icache_inval(); +- term_dat_out(caches_msg); +- term_dat_out(inval_msg); +- +- return TRUE; +-} +- +-/*********************************************************************** +- * +- * Function: cmd_dcache +- * +- * Purpose: MMU data cache enable and disable +- * +- * Processing: +- * If the value passed in the parser is 1, enable the data cache, +- * otherwise disable the data cache. +- * +- * Parameters: None +- * +- * Outputs: None +- * +- * Returns: TRUE if the command was processed, otherwise FALSE +- * +- * Notes: None +- * +- **********************************************************************/ +-BOOL_32 cmd_dcache(void) +-{ +- UNS_32 cenable; +- UNS_8 *ppar; +- +- /* Get argument */ +- cenable = cmd_get_field_val(1); +- +- switch (cenable) +- { +- case 0: +- dcache_flush(); +- cp15_set_dcache(0); +- ppar = disabled_msg; +- break; +- +- case 1: +- cp15_invalidate_cache(); +- cp15_set_dcache(1); +- ppar = enabled_msg; +- break; +- +- case 2: +- default: +- dcache_flush(); +- ppar = flushed_msg; +- break; +- } +- +- term_dat_out(dcache_msg); +- term_dat_out_crlf(ppar); +- +- return TRUE; +-} +- +-/*********************************************************************** +- * +- * Function: cmd_icache +- * +- * Purpose: MMU instruction cache enable and disable +- * +- * Processing: +- * If the value passed in the parser is 1, enable the instruction +- * cache, otherwise disable the instruction cache. +- * +- * Parameters: None +- * +- * Outputs: None +- * +- * Returns: TRUE if the command was processed, otherwise FALSE +- * +- * Notes: None +- * +- **********************************************************************/ +-BOOL_32 cmd_icache(void) +-{ +- UNS_32 cenable; +- UNS_8 *ppar; +- +- /* Get argument */ +- cenable = cmd_get_field_val(1); +- +- if (cenable == 1) +- { +- dcache_flush(); +- cp15_invalidate_cache(); +- cp15_set_icache(1); +- ppar = enabled_msg; +- } +- else +- { +- cp15_set_icache(0); +- ppar = disabled_msg; +- } +- +- term_dat_out(icache_msg); +- term_dat_out_crlf(ppar); +- +- return TRUE; +-} +- +- +-/*********************************************************************** +- * +- * Function: cmd_mmuenab +- * +- * Purpose: Enable or disable MMU +- * +- * Processing: +- * See function. +- * +- * Parameters: None +- * +- * Outputs: None +- * +- * Returns: TRUE if the command was processed, otherwise FALSE +- * +- * Notes: None +- * +- **********************************************************************/ +-BOOL_32 cmd_mmuenab(void) +-{ +- UNS_8 *ppar; +- UNS_32 cenable; +- +- term_dat_out_crlf((UNS_8 *) "Warning: Changing MMU status on " +- " cached and buffered code can cause system crashes."); +- +- /* Get argument */ +- cenable = cmd_get_field_val(1); +- +- if (cenable == 1) +- { +- if ((cp15_get_mmu_control_reg() & ARM922T_MMU_CONTROL_C) != 0) +- { +- cp15_invalidate_cache(); +- } +- +- cp15_set_mmu(1); +- ppar = enabled_msg; +- } +- else +- { +- cp15_dcache_flush(); +- cp15_write_buffer_flush(); +- cp15_invalidate_cache(); +- cp15_set_mmu(0); +- ppar = disabled_msg; +- } +- +- term_dat_out(mmu_msg); +- term_dat_out_crlf(ppar); +- +- return TRUE; +-} +- +-/*********************************************************************** +- * +- * Function: mmu_cmd_group_init +- * +- * Purpose: Initialize MMU command group +- * +- * Processing: +- * See function. +- * +- * Parameters: None +- * +- * Outputs: None +- * +- * Returns: Nothin +- * +- * Notes: None +- * +- **********************************************************************/ +-void mmu_cmd_group_init(void) +-{ +- /* Add MMU group */ +- cmd_add_group(&mmu_group); +- +- /* Add commands to the MMU group */ +- cmd_add_new_command(&mmu_group, &core_dcache_cmd); +- cmd_add_new_command(&mmu_group, &core_icache_cmd); +- cmd_add_new_command(&mmu_group, &core_inval_cmd); +- cmd_add_new_command(&mmu_group, &core_mmuenab_cmd); +- cmd_add_new_command(&mmu_group, &core_map_cmd); +- cmd_add_new_command(&mmu_group, &core_mmuinfo_cmd); +-}