X-Git-Url: https://review.fuel-infra.org/gitweb?a=blobdiff_plain;f=cirros-testvm%2Fsrc-cirros%2Fbuildroot-2015.05%2Fboard%2Folimex%2Fimx233_olinuxino%2Freadme.txt;fp=cirros-testvm%2Fsrc-cirros%2Fbuildroot-2015.05%2Fboard%2Folimex%2Fimx233_olinuxino%2Freadme.txt;h=1c36a61e7436aab54abe07ed6fddaae92c6c4f11;hb=b0a0f15dfaa205161a7fcb20cf1b8cd4948c2ef3;hp=0000000000000000000000000000000000000000;hpb=c6ac3cd55ee2da956195eee393b0882105dfad4e;p=packages%2Ftrusty%2Fcirros-testvm.git

diff --git a/cirros-testvm/src-cirros/buildroot-2015.05/board/olimex/imx233_olinuxino/readme.txt b/cirros-testvm/src-cirros/buildroot-2015.05/board/olimex/imx233_olinuxino/readme.txt
new file mode 100644
index 0000000..1c36a61
--- /dev/null
+++ b/cirros-testvm/src-cirros/buildroot-2015.05/board/olimex/imx233_olinuxino/readme.txt
@@ -0,0 +1,57 @@
+This configuration is intended as a base image.
+It includes kernel and firmware support for the common USB WiFi hardware.
+Packages for WiFi support are up to the user, you'll probably want
+one or more of: hostapd, iw, wireless_tools and/or wpa_supplicant.
+
+It also pulls up the console on the serial port, not on TV output.
+
+You'll need a spare MicroSD card with Freescale's special partition layout.
+This is basically two partitions:
+
+1) Type 53, the bootstrap + bootloader/kernel partition, should be 16MB.
+2) Anything you like, for this example an ext2 partition, type 83 (linux).
+
+Assuming you see your MicroSD card as /dev/sdc you'd need to do, as root
+and from the buildroot project top level directory:
+(remember to replace /dev/sdc* with the appropiate device name!)
+
+***** WARNING: Double check that /dev/sdc is your MicroSD card *****
+*****      It might be /dev/sdb or some other device name      *****
+***** Failure to do so may result in you wiping your hard disk *****
+
+1. Unmount the filesystem(s) if they're already mounted, usually...
+
+   # for fs in `grep /dev/sdc /proc/mounts|cut -d ' ' -f 1`;do umount $fs;done
+
+   ...should work
+
+2. Blank the partition table out
+
+   # dd if=/dev/zero of=/dev/sdc bs=1024 count=1024
+
+3. Set up the partitions
+
+   # fdisk /dev/sdc
+   n
+   p
+   1
+   <ENTER>
+   +16MB
+   t
+   53
+   n
+   p
+   2
+   <ENTER>
+   <ENTER>
+   w
+
+4. Fill up the first (bootstrap + kernel) partition
+   # dd if=output/images/imx23_olinuxino_dev_linux.sb bs=512 of=/dev/sdc1 seek=4
+
+5. Fill up the second (filesystem) partition
+   # dd if=output/images/rootfs.ext2 of=/dev/sdc2 bs=512
+
+6. Remove the MicroSD card from your linux PC and put it into your olinuxino.
+
+7. Boot! You're done!