-apt
-===
+# apt
-[](https://travis-ci.org/puppetlabs/puppetlabs-apt)
+#### Table of Contents
-Overview
---------
-The apt module provides a simple interface for managing APT source, key, and definitions with Puppet.
+1. [Module Description - What the module does and why it is useful](#module-description)
+1. [Setup - The basics of getting started with apt](#setup)
+ * [What apt affects](#what-apt-affects)
+ * [Beginning with apt](#beginning-with-apt)
+1. [Usage - Configuration options and additional functionality](#usage)
+ * [Add GPG keys](#add-gpg-keys)
+ * [Prioritize backports](#prioritize-backports)
+ * [Update the list of packages](#update-the-list-of-packages)
+ * [Pin a specific release](#pin-a-specific-release)
+ * [Add a Personal Package Archive repository](#add-a-personal-package-archive-repository)
+ * [Configure Apt from Hiera](#configure-apt-from-hiera)
+ * [Replace the default sources.list file](#replace-the-default-sourceslist-file)
+1. [Reference - An under-the-hood peek at what the module is doing and how](#reference)
+ * [Classes](#classes)
+ * [Defined types](#defined-types)
+ * [Types](#types)
+ * [Facts](#facts)
+ * [Tasks](#tasks)
+1. [Limitations - OS compatibility, etc.](#limitations)
+1. [Development - Guide for contributing to the module](#development)
-Module Description
-------------------
+## Module Description
-The apt module automates obtaining and installing software packages on \*nix systems.
+The apt module lets you use Puppet to manage Apt sources, keys, and other configuration options.
-***Note:** While this module allows the use of short keys, we **strongly** recommend that you **do not use short keys**, as they pose a serious security issue by opening you up to collision attacks.
+Apt (Advanced Package Tool) is a package manager available on Debian, Ubuntu, and several other operating systems. The apt module provides a series of classes, defines, types, and facts to help you automate Apt package management.
-Setup
------
+**Note**: For this module to correctly autodetect which version of Debian/Ubuntu (or derivative) you're running, you need to make sure the 'lsb-release' package is installed. We highly recommend you either make this part of your provisioning layer, if you run many Debian or derivative systems, or ensure that you have Facter 2.2.0 or later installed, which will pull this dependency in for you.
-**What apt affects:**
+## Setup
-* package/service/configuration files for APT
- * NOTE: Setting the `purge_preferences` or `purge_preferences_d` parameters to 'true' will destroy any existing configuration that was not declared with Puppet. The default for these parameters is 'false'.
-* your system's `sources.list` file and `sources.list.d` directory
- * NOTE: Setting the `purge_sources_list` and `purge_sources_list_d` parameters to 'true' will destroy any existing content that was not declared with Puppet. The default for these parameters is 'false'.
-* system repositories
-* authentication keys
+### What apt affects
+
+* Your system's `preferences` file and `preferences.d` directory
+* Your system's `sources.list` file and `sources.list.d` directory
+* System repositories
+* Authentication keys
+
+**Note:** This module offers `purge` parameters which, if set to `true`, **destroy** any configuration on the node's `sources.list(.d)` and `preferences(.d)` that you haven't declared through Puppet. The default for these parameters is `false`.
### Beginning with apt
-To begin using the apt module with default parameters, declare the class.
+To use the apt module with default parameters, declare the `apt` class.
- include apt
+```puppet
+include apt
+```
-Puppet code that uses anything from the apt module requires that the core apt class be declared.
+**Note:** The main `apt` class is required by all other classes, types, and defined types in this module. You must declare it whenever you use the module.
-Usage
------
+## Usage
-Using the apt module consists predominantly of declaring classes that provide the desired functionality and features.
+### Add GPG keys
+
+**Warning:** Using short key IDs presents a serious security issue, potentially leaving you open to collision attacks. We recommend you always use full fingerprints to identify your GPG keys. This module allows short keys, but issues a security warning if you use them.
+
+Declare the `apt::key` defined type:
+
+```puppet
+apt::key { 'puppetlabs':
+ id => '6F6B15509CF8E59E6E469F327F438280EF8D349F',
+ server => 'pgp.mit.edu',
+ options => 'http-proxy="http://proxyuser:proxypass@example.org:3128"',
+}
+```
+
+### Prioritize backports
+
+```puppet
+class { 'apt::backports':
+ pin => 500,
+}
+```
+
+By default, the `apt::backports` class drops a pin file for backports, pinning it to a priority of 200. This is lower than the normal default of 500, so packages with `ensure => latest` don't get upgraded from backports without your explicit permission.
+
+If you raise the priority through the `pin` parameter to 500, normal policy goes into effect and Apt installs or upgrades to the newest version. This means that if a package is available from backports, it and its dependencies are pulled in from backports unless you explicitly set the `ensure` attribute of the `package` resource to `installed`/`present` or a specific version.
+
+### Update the list of packages
+
+By default, Puppet runs `apt-get update` on the first Puppet run after you include the `apt` class, and anytime `notify => Exec['apt_update']` occurs; i.e., whenever config files get updated or other relevant changes occur. If you set `update['frequency']` to 'always', the update runs on every Puppet run. You can also set `update['frequency']` to 'daily' or 'weekly':
+
+```puppet
+class { 'apt':
+ update => {
+ frequency => 'daily',
+ },
+}
+```
+When `Exec['apt_update']` is triggered, it generates a `Notice` message. Because the default [logging level for agents](https://docs.puppet.com/puppet/latest/configuration.html#loglevel) is `notice`, this causes the repository update to appear in logs and agent reports. Some tools, such as [The Foreman](https://www.theforeman.org), report the update notice as a significant change. To eliminate these updates from reports, set the [loglevel](https://docs.puppet.com/puppet/latest/metaparameter.html#loglevel) metaparameter for `Exec['apt_update']` above the agent logging level:
+
+```puppet
+class { 'apt':
+ update => {
+ frequency => 'daily',
+ loglevel => 'debug',
+ },
+}
+```
+
+### Pin a specific release
+
+```puppet
+apt::pin { 'karmic': priority => 700 }
+apt::pin { 'karmic-updates': priority => 700 }
+apt::pin { 'karmic-security': priority => 700 }
+```
+
+You can also specify more complex pins using distribution properties:
+
+```puppet
+apt::pin { 'stable':
+ priority => -10,
+ originator => 'Debian',
+ release_version => '3.0',
+ component => 'main',
+ label => 'Debian'
+}
+```
+
+To pin multiple packages, pass them to the `packages` parameter as an array or a space-delimited string.
+
+### Add a Personal Package Archive repository
+
+```puppet
+apt::ppa { 'ppa:drizzle-developers/ppa': }
+```
+
+### Add an Apt source to `/etc/apt/sources.list.d/`
+
+```puppet
+apt::source { 'debian_unstable':
+ comment => 'This is the iWeb Debian unstable mirror',
+ location => 'http://debian.mirror.iweb.ca/debian/',
+ release => 'unstable',
+ repos => 'main contrib non-free',
+ pin => '-10',
+ key => {
+ 'id' => 'A1BD8E9D78F7FE5C3E65D8AF8B48AD6246925553',
+ 'server' => 'subkeys.pgp.net',
+ },
+ include => {
+ 'src' => true,
+ 'deb' => true,
+ },
+}
+```
+
+To use the Puppet Apt repository as a source:
+
+```puppet
+apt::source { 'puppetlabs':
+ location => 'http://apt.puppetlabs.com',
+ repos => 'main',
+ key => {
+ 'id' => '6F6B15509CF8E59E6E469F327F438280EF8D349F',
+ 'server' => 'pgp.mit.edu',
+ },
+}
+```
+
+### Configure Apt from Hiera
+
+Instead of specifying your sources directly as resources, you can instead just
+include the `apt` class, which will pick up the values automatically from
+hiera.
+
+```yaml
+apt::sources:
+ 'debian_unstable':
+ comment: 'This is the iWeb Debian unstable mirror'
+ location: 'http://debian.mirror.iweb.ca/debian/'
+ release: 'unstable'
+ repos: 'main contrib non-free'
+ pin: '-10'
+ key:
+ id: 'A1BD8E9D78F7FE5C3E65D8AF8B48AD6246925553'
+ server: 'subkeys.pgp.net'
+ include:
+ src: true
+ deb: true
-### apt
+ 'puppetlabs':
+ location: 'http://apt.puppetlabs.com'
+ repos: 'main'
+ key:
+ id: '6F6B15509CF8E59E6E469F327F438280EF8D349F'
+ server: 'pgp.mit.edu'
+```
-`apt` provides a number of common resources and options that are shared by the various defined types in this module, so you **must always** include this class in your manifests.
+### Replace the default `sources.list` file
-The parameters for `apt` are not generally required and are predominantly for development environment use cases.
+The following example replaces the default `/etc/apt/sources.list`. Along with this code, be sure to use the `purge` parameter, or you might get duplicate source warnings when running Apt.
- class { 'apt':
- always_apt_update => false,
- apt_update_frequency => undef,
- disable_keys => undef,
- proxy_host => false,
- proxy_port => '8080',
- purge_sources_list => false,
- purge_sources_list_d => false,
- purge_preferences_d => false,
- update_timeout => undef,
- fancy_progress => undef
- }
+```puppet
+apt::source { "archive.ubuntu.com-${lsbdistcodename}":
+ location => 'http://archive.ubuntu.com/ubuntu',
+ key => '630239CC130E1A7FD81A27B140976EAF437D05B5',
+ repos => 'main universe multiverse restricted',
+}
-Puppet will manage your system's `sources.list` file and `sources.list.d` directory but will do its best to respect existing content.
+apt::source { "archive.ubuntu.com-${lsbdistcodename}-security":
+ location => 'http://archive.ubuntu.com/ubuntu',
+ key => '630239CC130E1A7FD81A27B140976EAF437D05B5',
+ repos => 'main universe multiverse restricted',
+ release => "${lsbdistcodename}-security"
+}
-If you declare your apt class with `purge_sources_list`, `purge_sources_list_d`, `purge_preferences` and `purge_preferences_d` set to 'true', Puppet will unapologetically purge any existing content it finds that wasn't declared with Puppet.
+apt::source { "archive.ubuntu.com-${lsbdistcodename}-updates":
+ location => 'http://archive.ubuntu.com/ubuntu',
+ key => '630239CC130E1A7FD81A27B140976EAF437D05B5',
+ repos => 'main universe multiverse restricted',
+ release => "${lsbdistcodename}-updates"
+}
-### apt::builddep
+apt::source { "archive.ubuntu.com-${lsbdistcodename}-backports":
+ location => 'http://archive.ubuntu.com/ubuntu',
+ key => '630239CC130E1A7FD81A27B140976EAF437D05B5',
+ repos => 'main universe multiverse restricted',
+ release => "${lsbdistcodename}-backports"
+}
+```
-Installs the build depends of a specified package.
+## Reference
- apt::builddep { 'glusterfs-server': }
+### Classes
-### apt::force
+#### Public Classes
-Forces a package to be installed from a specific release. This class is particularly useful when using repositories, like Debian, that are unstable in Ubuntu.
-The cfg_files parameter controls wether newer or older configuration files should be used or only unchanged configuration files should be updated. Cfg_missing forces the provider to install all missing configuration files. Both are optional.
+* [`apt`](#class-apt)
+* [`apt::backports`](#class-aptbackports)
- apt::force { 'glusterfs-server':
- release => 'unstable',
- version => '3.0.3',
- cfg_files => 'unchanged',
- cfg_missing => true,
- require => Apt::Source['debian_unstable'],
- }
+#### Private Classes
-You can additionally set the following attributes:
+* `apt::params`: Provides defaults for the apt module parameters.
+* `apt::update`: Updates the list of available packages using `apt-get update`.
- * `cfg_files`: "new", "old", "unchanged" or "none" (default). "new" will overwrite all existing configuration files with newer ones, "old" will force usage of all old files and "unchanged" only updates unchanged config files whereas setting "none" will don't do anything but providing backward-compatability with existing puppet manifests.
- * `cfg_missing`: "true" or "false". Setting cfg_missing to false will provide backward compatability whereas setting true will add an aptitude/apt-get parameter which checks and installs missing configuration files for the selected package.
+### Defined Types
-### apt_key
+* [`apt::conf`](#defined-type-aptconf)
+* [`apt::key`](#defined-type-aptkey)
+* [`apt::pin`](#defined-type-aptpin)
+* [`apt::ppa`](#defined-type-aptppa)
+* [`apt::setting`](#defined-type-aptsetting)
+* [`apt::source`](#defined-type-aptsource)
-A native Puppet type and provider for managing GPG keys for APT is provided by this module.
+### Types
- apt_key { 'puppetlabs':
- ensure => 'present',
- id => '1054B7A24BD6EC30',
- }
+* [`apt_key`](#type-apt_key)
-You can additionally set the following attributes:
+### Facts
- * `source`: HTTP, HTTPS or FTP location of a GPG key or path to a file on the
- target host;
- * `content`: Instead of pointing to a file, pass the key in as a string;
- * `server`: The GPG key server to use. It defaults to *keyserver.ubuntu.com*;
- * `keyserver_options`: Additional options to pass to `--keyserver`.
+* `apt_updates`: The number of installed packages with available updates from `upgrade`.
-Because apt_key is a native type, it can be used in and queried for with MCollective.
+* `apt_dist_updates`: The number of installed packages with available updates from `dist-upgrade`.
-### apt::key
+* `apt_security_updates`: The number of installed packages with available security updates from `upgrade`.
-Adds a key to the list of keys used by APT to authenticate packages. This type uses the aforementioned `apt_key` native type. As such, it no longer requires
-the `wget` command on which the old implementation depended.
+* `apt_security_dist_updates`: The number of installed packages with available security updates from `dist-upgrade`.
- apt::key { 'puppetlabs':
- key => '1054B7A24BD6EC30',
- key_server => 'pgp.mit.edu',
- }
+* `apt_package_updates`: The names of all installed packages with available updates from `upgrade`. In Facter 2.0 and later this data is formatted as an array; in earlier versions it is a comma-delimited string.
- apt::key { 'jenkins':
- key => '9B7D32F2D50582E6',
- key_source => 'http://pkg.jenkins-ci.org/debian/jenkins-ci.org.key',
- }
+* `apt_package_dist_updates`: The names of all installed packages with available updates from `dist-upgrade`. In Facter 2.0 and later this data is formatted as an array; in earlier versions it is a comma-delimited string.
-### apt::pin
+* `apt_update_last_success`: The date, in epochtime, of the most recent successful `apt-get update` run (based on the mtime of /var/lib/apt/periodic/update-success-stamp).
-Adds an apt pin for a certain release.
+* `apt_reboot_required`: Determines if a reboot is necessary after updates have been installed.
- apt::pin { 'karmic': priority => 700 }
- apt::pin { 'karmic-updates': priority => 700 }
- apt::pin { 'karmic-security': priority => 700 }
+### Tasks
-Note you can also specifying more complex pins using distribution properties.
+The Apt module has an example task that allows a user to run apt-get update or upgrade. Please refer to to the [PE documentation](https://puppet.com/docs/pe/2017.3/orchestrator/running_tasks.html) or [Bolt documentation](https://puppet.com/docs/bolt/latest/bolt.html) on how to execute a task.
- apt::pin { 'stable':
- priority => -10,
- originator => 'Debian',
- release_version => '3.0',
- component => 'main',
- label => 'Debian'
- }
+#### Class: `apt`
-If you wish to pin a number of packages you may specify the packages as a space
-delimited string using the `packages` attribute or pass in an array of package
-names.
+Main class, includes all other classes.
-### apt::hold
+##### Parameters
-When you wish to hold a package in Puppet, it should be done by passing in
-'held' as the ensure attribute to the package resource. However, a lot of
-public modules do not take this into account and generally do not work well
-with an ensure of 'held'.
+All parameters are optional unless specified.
-Moreover, when Puppet is told to hold a package, it holds it at the current version installed; there is no way to tell it to both install a specific version **and** hold that version, unless you use an exec resource that wraps `dpkg --set-selections` or `apt-mark`.
+* `confs`: Creates new `apt::conf` resources. Valid options: a hash to be passed to the [`create_resources` function](https://docs.puppetlabs.com/references/latest/function.html#createresources). Default: {}.
-At first glance, it seems this issue could also be solved by passing the version required to the ensure attribute---but that only means that Puppet will install that
-version after it processes the package. It does not inform apt that we want
-this package to be held; that is, should another package want to upgrade this one (because of a version requirement in a dependency, for example), we want apt to refuse.
+* `keys`: Creates new `apt::key` resources. Valid options: a hash to be passed to the [`create_resources` function](https://docs.puppetlabs.com/references/latest/function.html#createresources). Default: {}.
-To solve this issue, use apt::hold. Implement this by creating a preferences file with a priority of 1001. Under normal circumstances, this preference will always win. Because the priority is > 1000, apt will maintain the required version, downgrading the current package if necessary.
+* `ppas`: Creates new `apt::ppa` resources. Valid options: a hash to be passed to the [`create_resources` function](https://docs.puppetlabs.com/references/latest/function.html#createresources). Default: {}.
-With this, you can now set a package's ensure attribute to 'latest' but get the version specified by apt::hold:
+* `proxy`: Configures Apt to connect to a proxy server. Valid options: a hash made up from the following keys:
- apt::hold { 'vim':
- version => '2:7.3.547-7',
- }
+ * `host`: Specifies a proxy host to be stored in `/etc/apt/apt.conf.d/01proxy`. Valid options: a string containing a hostname. Default: undef.
-Alternatively, if you want to hold Vim at version 7.3.*, you can pass in a version with a glob:
+ * `port`: Specifies a proxy port to be stored in `/etc/apt/apt.conf.d/01proxy`. Valid options: an integer containing a port number. Default: 8080.
- apt::hold { 'vim':
- version => '2:7.3.*',
- }
+ * `https`: Specifies whether to enable https proxies. Valid options: `true` and `false`. Default: `false`.
-### apt::ppa
+ * `ensure`: Optional parameter. Valid options: 'file', 'present', and 'absent'. Default: `undef`. Prefer 'file' over 'present'.
+
+ * `direct`: Specifies whether or not to use a 'DIRECT' https proxy if http proxy is used but https is not. Valid options: `true` and `false`. Default: `false`.
-Adds a ppa repository using `add-apt-repository`.
+* `purge`: Specifies whether to purge any existing settings that aren't managed by Puppet. Valid options: a hash made up from the following keys:
- apt::ppa { 'ppa:drizzle-developers/ppa': }
+ * `sources.list`: Specifies whether to purge any unmanaged entries from `sources.list`. Valid options: `true` and `false`. Default: `false`.
-### apt::release
+ * `sources.list.d`: Specifies whether to purge any unmanaged entries from `sources.list.d`. Valid options: `true` and `false`. Default: `false`.
-Sets the default apt release. This class is particularly useful when using repositories, like Debian, that are unstable in Ubuntu.
+ * `preferences`: Specifies whether to purge any unmanaged entries from `preferences`. Valid options: `true` and `false`. Default: `false`.
- class { 'apt::release':
- release_id => 'precise',
- }
+ * `preferences.d`: Specifies whether to purge any unmanaged entries from `preferences.d`. Valid options: `true` and `false`. Default: `false`.
-### apt::source
+* `settings`: Creates new `apt::setting` resources. Valid options: a hash to be passed to the [`create_resources` function](https://docs.puppetlabs.com/references/latest/function.html#createresources). Default: {}.
-Adds an apt source to `/etc/apt/sources.list.d/`.
+* `sources`: Creates new `apt::source` resources. Valid options: a hash to be passed to the [`create_resources` function](https://docs.puppetlabs.com/references/latest/function.html#createresources). Default: {}.
- apt::source { 'debian_unstable':
- comment => 'This is the iWeb Debian unstable mirror',
- location => 'http://debian.mirror.iweb.ca/debian/',
- release => 'unstable',
- repos => 'main contrib non-free',
- required_packages => 'debian-keyring debian-archive-keyring',
- key => '8B48AD6246925553',
- key_server => 'subkeys.pgp.net',
- pin => '-10',
- include_src => true,
- include_deb => true
- }
+* `pins`: Creates new `apt::pin` resources. Valid options: a hash to be passed to the [`create_resources` function](https://docs.puppetlabs.com/references/latest/function.html#createresources). Default: {}.
-If you would like to configure your system so the source is the Puppet Labs APT repository:
+* `update`: Configures various update settings. Valid options: a hash made up from the following keys:
- apt::source { 'puppetlabs':
- location => 'http://apt.puppetlabs.com',
- repos => 'main',
- key => '1054B7A24BD6EC30',
- key_server => 'pgp.mit.edu',
- }
+ * `frequency`: Specifies how often to run `apt-get update`. If the exec resource `apt_update` is notified, `apt-get update` runs regardless of this value. Valid options: 'always' (at every Puppet run); 'daily' (if the value of `apt_update_last_success` is less than current epoch time minus 86400); 'weekly' (if the value of `apt_update_last_success` is less than current epoch time minus 604800); and 'reluctantly' (only if the exec resource `apt_update` is notified). Default: 'reluctantly'.
-### apt::update
+ * `timeout`: Specifies how long to wait for the update to complete before canceling it. Valid options: an integer, in seconds. Default: 300.
-Runs `apt-get update`, updating the list of available packages and their versions without installing or upgrading any packages.
+ * `tries`: Specifies how many times to retry the update after receiving a DNS or HTTP error. Valid options: an integer. Default: 1.
-The update runs on the first Puppet run after you include the class, then whenever `notify => Exec['apt_update']` occurs---this should happen when config files get updated or other relevant changes occur. If you set the `always_apt_update` parameter, the update will run on every Puppet run.
+#### Class: `apt::backports`
-### Facts
+Manages backports.
-There are a few facts included in the apt module describing the state of the apt system:
+##### Parameters
-* `apt_updates` --- the number of updates available on the system
-* `apt_security_updates` --- the number of updates which are security updates
-* `apt_package_updates` --- the package names that are available for update. In Facter 2.0 and later, this will be a list type; in earlier versions, it is a comma-delimited string.
-* `apt_update_last_success` --- The date in epochtime that `apt-get update` last ran successfully. This is determined by reading the mtime of the file `/var/lib/apt/periodic/update-success-stamp`. That file is generated by the `/etc/apt/apt.conf.d/15update-stamp` file.
+All parameters are optional on Debian and Ubuntu and required on other operating systems, except where specified.
-#### Hiera example
-<pre>
-apt::sources:
- 'debian_unstable':
- location: 'http://debian.mirror.iweb.ca/debian/'
- release: 'unstable'
- repos: 'main contrib non-free'
- required_packages: 'debian-keyring debian-archive-keyring'
- key: '9AA38DCD55BE302B'
- key_server: 'subkeys.pgp.net'
- pin: '-10'
- include_src: 'true'
- include_deb: 'true'
+* `key`: Specifies a key to authenticate the backports. Valid options: a string to be passed to the `id` parameter of the `apt::key` defined type, or a hash of `parameter => value` pairs to be passed to `apt::key`'s `id`, `server`, `content`, `source`, and/or `options` parameters. Defaults:
- 'puppetlabs':
- location: 'http://apt.puppetlabs.com'
- repos: 'main'
- key: '1054B7A24BD6EC30'
- key_server: 'pgp.mit.edu'
-</pre>
+ * Debian: 'A1BD8E9D78F7FE5C3E65D8AF8B48AD6246925553'
+ * Ubuntu: '630239CC130E1A7FD81A27B140976EAF437D05B5'
+
+* `location`: Specifies an Apt repository containing the backports to manage. Valid options: a string containing a URL. Defaults:
+
+ * Debian: 'http://deb.debian.org/debian'
+ * Ubuntu: 'http://archive.ubuntu.com/ubuntu'
+
+* `pin`: *Optional.* Specifies a pin priority for the backports. Valid options: a number or string to be passed to the `id` parameter of the `apt::pin` defined type, or a hash of `parameter => value` pairs to be passed to `apt::pin`'s corresponding parameters. Default: '200'.
+
+* `release`: Specifies a distribution of the Apt repository containing the backports to manage. Valid options: a string containing the release, used in populating the `source.list` configuration file. Default: on Debian and Ubuntu, '${lsbdistcodename}-backports'. We recommend keeping this default, except on other operating systems.
+
+* `repos`: Specifies a component of the Apt repository containing the backports to manage. Valid options: A string containing the repos to include, used in populating the `source.list` configuration file. Defaults:
+
+ * Debian: 'main contrib non-free'
+ * Ubuntu: 'main universe multiverse restricted'
+
+#### Defined Type: `apt::conf`
+
+Specifies a custom Apt configuration file.
+
+##### Parameters
+
+All parameters are optional unless specified.
+
+
+* `content`: *Required, unless `ensure` is set to 'absent'.* Directly supplies content for the configuration file. Valid options: a string. Default: undef.
+
+* `ensure`: Specifies whether the configuration file should exist. Valid options: 'present' and 'absent'. Default: 'present'.
+
+* `priority`: *Optional.* Determines the order in which Apt processes the configuration file. Files with lower priority numbers are loaded first. Valid options: a string containing an integer. Default: '50'.
+
+* `notify_update`: *Optional.* Specifies whether to trigger an `apt-get update` run. Valid options: `true` and `false`. Default: `true`.
+
+#### Defined type: `apt::key`
+
+Manages the GPG keys that Apt uses to authenticate packages.
+
+The `apt::key` defined type makes use of the `apt_key` type, but includes extra functionality to help prevent duplicate keys.
+
+##### Parameters (all optional)
+
+* `content`: Supplies the entire GPG key. Useful in case the key can't be fetched from a remote location and using a file resource is inconvenient. Valid options: a string. Default: undef.
+
+* `ensure`: Specifies whether the key should exist. Valid options: 'present' and 'absent'. Default: 'present'.
+
+* `id`: Specifies a GPG key to authenticate Apt package signatures. Valid options: a string containing a key ID (8 or 16 hexadecimal characters, optionally prefixed with "0x") or a full key fingerprint (40 hexadecimal characters). Default: $title.
+
+* `options`: Passes additional options to `apt-key adv --keyserver-options`. Valid options: a string. Default: undef.
+
+* `source`: Specifies the location of an existing GPG key file to copy. Valid options: a string containing a URL (ftp://, http://, or https://) or an absolute path. Default: undef.
+
+* `server`: Specifies a keyserver to provide the GPG key. Valid options: a string containing a domain name or a full URL (http://, https://, or hkp://). Default: 'keyserver.ubuntu.com'.
+
+#### Defined type: `apt::pin`
+
+Manages Apt pins. Does not trigger an `apt-get update` run.
+
+**Note:** For context on these parameters, we recommend reading the man page ['apt_preferences(5)'](http://linux.die.net/man/5/apt_preferences)
+
+##### Parameters
+
+All parameters are optional unless specified.
+
+* `codename`: Specifies the distribution (lsbdistcodename) of the Apt repository. Valid options: a string. Default: ''.
+
+* `component`: Names the licensing component associated with the packages in the directory tree of the Release file. Valid options: a string. Default: ''.
+
+* `ensure`: Specifies whether the pin should exist. Valid options: 'file', 'present', and 'absent'. Default: 'present'.
+
+* `explanation`: Supplies a comment to explain the pin. Valid options: a string. Default: "${caller_module_name}: ${name}".
+
+* `label`: Names the label of the packages in the directory tree of the Release file. Valid options: a string (most commonly, 'debian'). Default: ''.
+
+* `order`: Determines the order in which Apt processes the pin file. Files with lower order numbers are loaded first. Valid options: an integer. Default: 50.
+
+* `origin`: Tells Apt to prefer packages from the specified server. Valid options: a string containing a hostname. Default: ''.
+
+* `originator`: Names the originator of the packages in the directory tree of the Release file. Valid options: a string (most commonly, 'debian'). Default: ''.
+
+* `packages`: Specifies which package(s) to pin. Valid options: a string or an array. Default: `*`.
+
+* `priority`: Sets the priority of the package. If multiple versions of a given package are available, `apt-get` installs the one with the highest priority number (subject to dependency constraints). Valid options: an integer. Default: 0.
+
+* `release`: Tells Apt to prefer packages that support the specified release. Typical values include 'stable', 'testing', and 'unstable' Valid options: a string. Default: ''.
+
+* `release_version`: Tells Apt to prefer packages that support the specified operating system release version (such as Debian release version 7). Valid options: a string. Default: ''.
+
+* `version`: Tells Apt to prefer a specified package version or version range. Valid options: a string. Default: ''.
+
+#### Defined Type: `apt::ppa`
+
+Manages PPA repositories using `add-apt-repository`. Not supported on Debian.
+
+##### Parameters
+
+All parameters are optional unless specified.
+
+* `ensure`: Specifies whether the PPA should exist. Valid options: 'present' and 'absent'. Default: 'present'.
+
+* `options`: Supplies options to be passed to the `add-apt-repository` command. Valid options: a string. Defaults:
+
+ * Lucid: undef
+ * All others: '-y'
+
+* `package_manage`: Specifies whether Puppet should manage the package that provides `apt-add-repository`. Valid options: `true` and `false`. Default: `false`.
+
+* `package_name`: Names the package that provides the `apt-add-repository` command. Valid options: a string. Defaults:
+
+ * Lucid and Precise: 'python-software-properties'
+ * Trusty and newer: 'software-properties-common'
+ * All others: 'python-software-properties'
+
+* `release`: *Optional if lsb-release is installed (unless you're using a different release than indicated by lsb-release, e.g., Linux Mint).* Specifies the operating system of your node. Valid options: a string containing a valid LSB distribution codename. Default: "$lsbdistcodename".
+
+#### Defined Type: `apt::setting`
+
+Manages Apt configuration files.
+
+##### Parameters
+
+All parameters are optional unless specified.
+
+* `content`: *Required, unless `source` is set.* Directly supplies content for the configuration file. Cannot be used in combination with `source`. Valid options: see the `content` attribute of [Puppet's native `file` type](https://docs.puppetlabs.com/references/latest/type.html#file-attribute-content). Default: undef.
+
+* `ensure`: Specifies whether the file should exist. Valid options: 'present', 'absent', and 'file'. Default: 'file'.
+
+* `notify_update`: *Optional.* Specifies whether to trigger an `apt-get update` run. Valid options: `true` and `false`. Default: `true`.
+
+* `priority`: *Optional.* Determines the order in which Apt processes the configuration file. Files with higher priority numbers are loaded first. Valid options: an integer or zero-padded integer. Default: 50.
+
+* `source`: *Required, unless `content` is set.* Specifies a source file to supply the content of the configuration file. Cannot be used in combination with `content`. Valid options: see the `source` attribute of [Puppet's native `file` type](https://docs.puppetlabs.com/references/latest/type.html#file-attribute-source). Default: undef.
+
+#### Defined Type: `apt::source`
+
+Manages the Apt sources in `/etc/apt/sources.list.d/`.
+
+##### Parameters
+
+All parameters are optional unless specified.
+
+* `allow_unsigned`: Specifies whether to authenticate packages from this release, even if the Release file is not signed or the signature can't be checked. Valid options: `true` and `false`. Default: `false`.
+
+* `architecture`: Tells Apt to only download information for specified architectures. Valid options: a string containing one or more architecture names, separated by commas (e.g., 'i386' or 'i386,alpha,powerpc'). Default: undef (if unspecified, Apt downloads information for all architectures defined in the Apt::Architectures option).
+
+* `comment`: Supplies a comment for adding to the Apt source file. Valid options: a string. Default: $name.
+
+* `ensure`: Specifies whether the Apt source file should exist. Valid options: 'present' and 'absent'. Default: 'present'.
-### Testing
+* `key`: Creates a declaration of the apt::key defined type. Valid options: a string to be passed to the `id` parameter of the `apt::key` defined type, or a hash of `parameter => value` pairs to be passed to `apt::key`'s `id`, `server`, `content`, `source`, and/or `options` parameters. Default: undef.
-The apt module is mostly a collection of defined resource types, which provide reusable logic that can be leveraged to manage APT. It provides smoke tests for testing functionality on a target system, as well as spec tests for checking a compiled catalog against an expected set of resources.
+* `include`: Configures include options. Valid options: a hash of available keys. Default: {}. Available keys are:
-#### Example Test
+ * `deb` - Specifies whether to request the distribution's compiled binaries. Valid options: `true` and `false`. Default: `true`.
-This test will set up a Puppet Labs APT repository. Start by creating a new smoke test, called puppetlabs-apt.pp, in the apt module's test folder. In this test, declare a single resource representing the Puppet Labs APT source and GPG key:
+ * `src` - Specifies whether to request the distribution's uncompiled source code. Valid options: `true` and `false`. Default: `false`.
- apt::source { 'puppetlabs':
- location => 'http://apt.puppetlabs.com',
- repos => 'main',
- key => '1054B7A24BD6EC30',
- key_server => 'pgp.mit.edu',
- }
+* `location`: *Required, unless `ensure` is set to 'absent'.* Specifies an Apt repository. Valid options: a string containing a repository URL. Default: undef.
-This resource creates an APT source named puppetlabs and gives Puppet information about the repository's location and the key used to sign its packages. Puppet leverages Facter to determine the appropriate release, but you can set this directly by adding the release type.
+* `pin`: Creates a declaration of the apt::pin defined type. Valid options: a number or string to be passed to the `id` parameter of the `apt::pin` defined type, or a hash of `parameter => value` pairs to be passed to `apt::pin`'s corresponding parameters. Default: undef.
-Check your smoke test for syntax errors:
+* `release`: Specifies a distribution of the Apt repository. Valid options: a string. Default: "$lsbdistcodename".
- $ puppet parser validate tests/puppetlabs-apt.pp
+ * `repos`: Specifies a component of the Apt repository. Valid options: a string. Default: 'main'.
-If you receive no output from that command, it means nothing is wrong. Then, apply the code:
+* `notify_update`: *Optional.* Specifies whether to trigger an `apt-get update` run. Valid options: `true` and `false`. Default: `true`.
- $ puppet apply --verbose tests/puppetlabs-apt.pp
- notice: /Stage[main]//Apt::Source[puppetlabs]/File[puppetlabs.list]/ensure: defined content as '{md5}3be1da4923fb910f1102a233b77e982e'
- info: /Stage[main]//Apt::Source[puppetlabs]/File[puppetlabs.list]: Scheduling refresh of Exec[puppetlabs apt update]
- notice: /Stage[main]//Apt::Source[puppetlabs]/Exec[puppetlabs apt update]: Triggered 'refresh' from 1 events>
+#### Type: `apt_key`
-The above example uses a smoke test to lay out a resource declaration and apply it on your system. In production, you might want to declare your APT sources inside the classes where they’re needed.
+Manages the GPG keys that Apt uses to authenticate packages.
-Implementation
---------------
+**Note:** In most cases, we recommend using the `apt::key` defined type. It makes use of the `apt_key` type, but includes extra functionality to help prevent duplicate keys.
-### apt::backports
+##### Parameters
-Adds the necessary components to get backports for Ubuntu and Debian. The release name defaults to `$lsbdistcodename`. Setting this manually can cause undefined behavior (read: universe exploding).
+All parameters are optional.
-By default this class drops a Pin-file for Backports, pinning it to a priority of 200. This is lower than the normal Debian archive, which gets a priority of 500 to ensure that packages with `ensure => latest` don't get magically upgraded from Backports without your explicit permission.
+* `content`: Supplies the entire GPG key. Useful in case the key can't be fetched from a remote location and using a file resource is inconvenient. Cannot be used in combination with `source`. Valid options: a string. Default: undef.
-If you raise the priority through the `pin_priority` parameter to *500*, identical to the rest of the Debian mirrors, normal policy goes into effect and the newest version wins/becomes the candidate apt will want to install or upgrade to. This means that if a package is available from Backports it and its dependencies will be pulled in from Backports unless you explicitly set the `ensure` attribute of the `package` resource to `installed`/`present` or a specific version.
+* `options`: Passes additional options to `apt-key adv --keyserver-options`. Valid options: a string. Default: undef.
-Limitations
------------
+* `server`: Specifies a keyserver to provide Puppet's GPG key. Valid options: a string containing a domain name or a full URL. Default: 'keyserver.ubuntu.com'.
-This module should work across all versions of Debian/Ubuntu and support all major APT repository management features.
+* `source`: Specifies the location of an existing GPG key file to copy. Cannot be used in combination with `content`. Valid options: a string containing a URL (ftp://, http://, or https://) or an absolute path. Default: undef.
-Development
-------------
+## Limitations
-Puppet Labs modules on the Puppet Forge are open projects, and community contributions are essential for keeping them great. We can’t access the huge number of platforms and myriad of hardware, software, and deployment configurations that Puppet is intended to serve.
+This module is tested and officially supported on Debian 6 and 7 and Ubuntu 10.04, 12.04, and 14.04. Testing on other platforms has been light and cannot be guaranteed.
-We want to keep it as easy as possible to contribute changes so that our modules work in your environment. There are a few guidelines that we need contributors to follow so that we can have a chance of keeping on top of things.
+This module is not designed to be split across [run stages](https://docs.puppetlabs.com/puppet/latest/reference/lang_run_stages.html).
-You can read the complete module contribution guide [on the Puppet Labs wiki.](http://projects.puppetlabs.com/projects/module-site/wiki/Module_contributing)
+### Adding new sources or PPAs
-License
--------
+If you are adding a new source or PPA and trying to install packages from the new source or PPA on the same Puppet run, your `package` resource should depend on `Class['apt::update']`, in addition to depending on the `Apt::Source` or the `Apt::Ppa`. You can also add [collectors](https://docs.puppetlabs.com/puppet/latest/reference/lang_collectors.html) to ensure that all packages happen after `apt::update`, but this can lead to dependency cycles and has implications for [virtual resources](https://docs.puppetlabs.com/puppet/latest/reference/lang_collectors.html#behavior).
-The original code for this module comes from Evolving Web and was licensed under the MIT license. Code added since the fork of this module is licensed under the Apache 2.0 License like the rest of the Puppet Labs products.
+```puppet
+Class['apt::update'] -> Package <| provider == 'apt' |>
+```
-The LICENSE contains both licenses.
+## Development
-Contributors
-------------
+Puppet modules on the Puppet Forge are open projects, and community contributions are essential for keeping them great. We can't access the huge number of platforms and myriad hardware, software, and deployment configurations that Puppet is intended to serve. We want to keep it as easy as possible to contribute changes so that our modules work in your environment. There are a few guidelines that we need contributors to follow so that we can have a chance of keeping on top of things.
-A lot of great people have contributed to this module. A somewhat current list follows:
+For more information, see our [module contribution guide.](https://docs.puppetlabs.com/forge/contributing.html)
-* Ben Godfrey <ben.godfrey@wonga.com>
-* Branan Purvine-Riley <branan@puppetlabs.com>
-* Christian G. Warden <cwarden@xerus.org>
-* Dan Bode <bodepd@gmail.com> <dan@puppetlabs.com>
-* Daniel Tremblay <github@danieltremblay.ca>
-* Garrett Honeycutt <github@garretthoneycutt.com>
-* Jeff Wallace <jeff@evolvingweb.ca> <jeff@tjwallace.ca>
-* Ken Barber <ken@bob.sh>
-* Matthaus Litteken <matthaus@puppetlabs.com> <mlitteken@gmail.com>
-* Matthias Pigulla <mp@webfactory.de>
-* Monty Taylor <mordred@inaugust.com>
-* Peter Drake <pdrake@allplayers.com>
-* Reid Vandewiele <marut@cat.pdx.edu>
-* Robert Navarro <rnavarro@phiivo.com>
-* Ryan Coleman <ryan@puppetlabs.com>
-* Scott McLeod <scott.mcleod@theice.com>
-* Spencer Krum <spencer@puppetlabs.com>
-* William Van Hevelingen <blkperl@cat.pdx.edu> <wvan13@gmail.com>
-* Zach Leslie <zach@puppetlabs.com>
-* Daniele Sluijters <github@daenney.net>
-* Daniel Paulus <daniel@inuits.eu>
-* Wolf Noble <wolf@wolfspyre.com>
+To see who's already involved, see the [list of contributors.](https://github.com/puppetlabs/puppetlabs-apt/graphs/contributors)
Code Review / puppet-modules / puppetlabs-apt.git / blobdiff