1 # ceilometer po-debconf translation to Spanish
2 # Copyright (C) 2013 Software in the Public Interest
3 # This file is distributed under the same license as the ceilometer package.
6 # - Initial translation
7 # Matías A. Bellone <matiasbellone+debian@gmail.com>, 2013
9 # Traductores, si no conocen el formato PO, merece la pena leer la
10 # documentación de gettext, especialmente las secciones dedicadas a este
11 # formato, por ejemplo ejecutando:
12 # info -n '(gettext)PO Files'
13 # info -n '(gettext)Header Entry'
15 # Equipo de traducción al español, por favor lean antes de traducir
16 # los siguientes documentos:
18 # - El proyecto de traducción de Debian al español
19 # http://www.debian.org/intl/spanish/coordinacion
20 # especialmente las notas de traducción en
21 # http://www.debian.org/intl/spanish/notas
23 # - La guía de traducción de po's de debconf:
24 # /usr/share/doc/po-debconf/README-trans
25 # o http://www.debian.org/intl/l10n/po-debconf/README-trans
29 "Project-Id-Version: ceilometer 2013.1.2-4\n"
30 "Report-Msgid-Bugs-To: ceilometer@packages.debian.org\n"
31 "POT-Creation-Date: 2016-03-29 12:22+0000\n"
32 "PO-Revision-Date: 2013-12-08 21:29-0300\n"
33 "Last-Translator: Matías Bellone <matiasbellone+debian@gmail.com>\n"
34 "Language-Team: Debian l10n Spanish <debian-l10n-spanish@lists.debian.org>\n"
37 "Content-Type: text/plain; charset=UTF-8\n"
38 "Content-Transfer-Encoding: 8bit\n"
42 #: ../ceilometer-api.templates:2001
43 msgid "Register Ceilometer in the Keystone endpoint catalog?"
45 "¿Desea registrar Ceilometer en el catálogo de puntos finales de Keystone?"
49 #: ../ceilometer-api.templates:2001
51 "Each OpenStack service (each API) should be registered in order to be "
52 "accessible. This is done using \"keystone service-create\" and \"keystone "
53 "endpoint-create\". This can be done automatically now."
55 "Debe registrar cada uno de los servicios OpenStack (cada API) para que sean "
56 "accesibles. Esto se lleva a cabo mediante las órdenes «keystone service-"
57 "create» y «keystone endpoint-create». Puede hacerlo ahora automáticamente."
61 #: ../ceilometer-api.templates:2001
64 #| "Note that you will need to have an up and running Keystone server on "
65 #| "which to connect using the Keystone authentication token."
67 "Note that you will need to have an up and running Keystone server on which "
68 "to connect using a known admin project name, admin username and password. "
69 "The admin auth token is not used anymore."
71 "Tenga en cuenta que necesitará disponer de un servidor Keystone en ejecución "
72 "al que conectarse utilizando el token de autenticación de Keystone."
76 #: ../ceilometer-api.templates:3001
77 msgid "Keystone server IP address:"
78 msgstr "Dirección IP del servidor Keystone:"
82 #: ../ceilometer-api.templates:3001
84 "Please enter the IP address of the Keystone server, so that ceilometer-api "
85 "can contact Keystone to do the Ceilometer service and endpoint creation."
87 "Introduzca la dirección IP del servidor Keystone para que ceilometer-api "
88 "pueda contactar con Keystone para realizar el servicio Ceilometer y crear el "
93 #: ../ceilometer-api.templates:4001
95 #| msgid "Keystone authentication token:"
96 msgid "Keystone admin name:"
97 msgstr "Token de autenticación de Keystone:"
105 #: ../ceilometer-api.templates:4001 ../ceilometer-api.templates:5001
106 #: ../ceilometer-api.templates:6001
108 "To register the service endpoint, this package needs to know the Admin "
109 "login, name, project name, and password to the Keystone server."
114 #: ../ceilometer-api.templates:5001
115 msgid "Keystone admin project name:"
120 #: ../ceilometer-api.templates:6001
121 msgid "Keystone admin password:"
126 #: ../ceilometer-api.templates:7001
127 msgid "Ceilometer endpoint IP address:"
128 msgstr "Dirección IP del punto final de Ceilometer:"
132 #: ../ceilometer-api.templates:7001
133 msgid "Please enter the IP address that will be used to contact Ceilometer."
135 "Introduzca la dirección IP que se utilizará para contactar con Ceilometer."
139 #: ../ceilometer-api.templates:7001
141 "This IP address should be accessible from the clients that will use this "
142 "service, so if you are installing a public cloud, this should be a public IP "
145 "Esta dirección IP debe ser accesible desde los clientes que usarán este "
146 "servicio, por lo que si está instalando una nube pública, debería ser una "
147 "dirección IP pública."
151 #: ../ceilometer-api.templates:8001
152 msgid "Name of the region to register:"
153 msgstr "Nombre de la región a registrar:"
157 #: ../ceilometer-api.templates:8001
159 "OpenStack supports using availability zones, with each region representing a "
160 "location. Please enter the zone that you wish to use when registering the "
163 "OpenStack puede utilizarse con zonas de disponibilidad, donde cada región "
164 "representa una ubicación. Introduzca la zona que desea utilizar cuando "
165 "registre el punto final."
169 #: ../ceilometer-common.templates:2001
170 msgid "Perform automatic dbsync for Ceilometer?"
175 #: ../ceilometer-common.templates:2001
177 "Ceilometer can automatically run ceilometer-dbsync after installation. For "
178 "it to work, you need an up and running mongodb-server."
183 #: ../ceilometer-common.templates:2001
185 "You can change this setting later on by running \"dpkg-reconfigure -plow "
191 #: ../ceilometer-common.templates:3001
192 msgid "IP address of your RabbitMQ host:"
201 #: ../ceilometer-common.templates:3001 ../ceilometer-common.templates:4001
202 #: ../ceilometer-common.templates:5001
204 "In order to interoperate with other components of OpenStack, this package "
205 "needs to connect to a central RabbitMQ server."
210 #: ../ceilometer-common.templates:3001
212 #| msgid "Please enter the IP address that will be used to contact Ceilometer."
213 msgid "Please specify the IP address of that server."
215 "Introduzca la dirección IP que se utilizará para contactar con Ceilometer."
219 #: ../ceilometer-common.templates:4001
220 msgid "Username for connection to the RabbitMQ server:"
225 #: ../ceilometer-common.templates:4001
226 msgid "Please specify the username used to connect to the RabbitMQ server."
231 #: ../ceilometer-common.templates:5001
232 msgid "Password for connection to the RabbitMQ server:"
237 #: ../ceilometer-common.templates:5001
238 msgid "Please specify the password used to connect to the RabbitMQ server."
243 #: ../ceilometer-common.templates:6001
244 msgid "Authentication server hostname:"
249 #: ../ceilometer-common.templates:6001
251 "Please specify the hostname of the authentication server for Ceilometer. "
252 "Typically this is also the hostname of the OpenStack Identity Service "
258 #. Translators: a "tenant" in OpenStack world is
259 #. an entity that contains one or more username/password couples.
260 #. It's typically the tenant that will be used for billing. Having more than one
261 #. username/password is very helpful in larger organization.
262 #. You're advised to either keep "tenant" without translating it
263 #. or keep it parenthezised. Example for French:
264 #. locataire ("tenant")
265 #: ../ceilometer-common.templates:7001
266 msgid "Authentication server tenant name:"
271 #. Translators: a "tenant" in OpenStack world is
272 #. an entity that contains one or more username/password couples.
273 #. It's typically the tenant that will be used for billing. Having more than one
274 #. username/password is very helpful in larger organization.
275 #. You're advised to either keep "tenant" without translating it
276 #. or keep it parenthezised. Example for French:
277 #. locataire ("tenant")
278 #: ../ceilometer-common.templates:7001
279 msgid "Please specify the authentication server tenant name."
284 #: ../ceilometer-common.templates:8001
285 msgid "Authentication server username:"
290 #: ../ceilometer-common.templates:8001
291 msgid "Please specify the username to use with the authentication server."
296 #: ../ceilometer-common.templates:9001
297 msgid "Authentication server password:"
302 #: ../ceilometer-common.templates:9001
303 msgid "Please specify the password to use with the authentication server."
307 #~ "To configure its endpoint in Keystone, ceilometer-api needs the Keystone "
308 #~ "authentication token."
310 #~ "Para configurar su punto final en Keystone, ceilometer-api necesita el "
311 #~ "token de autenticación de Keystone."