cirros-testvm/src-cirros/buildroot-2015.05/board/telit/evk-pro3/readme.txt

   1 Buildroot board support for Telit EVK-PRO3 with Telit GE863-PRO3
   2
   3 Official site:
   4   http://www.telit.com/en/products.php?p_id=3&p_ac=show&p=10
   5
   6 Build images:
   7     make telit_evk_pro3_defconfig
   8     make
   9
  10   images built:
  11   - output/images/barebox.bin
  12   - output/images/zImage
  13   - output/images/rootfs.ubi
  14
  15
  16 Flash built images:
  17   The first time you need to bootstrap from Telit Official Release 221.07.1007,
  18   at the U-Boot prompt type:
  19     U-Boot> loadb
  20   send buildroot/output/images/barebox.bin
  21     U-Boot> go 0x20200000
  22
  23   flash updated images using barebox through tftp:
  24     barebox:/ erase dev/self0; cp /mnt/tftp/barebox.bin /dev/self0
  25     barebox:/ erase /dev/nand0.kernel.bb; cp /mnt/tftp/zImage /dev/nand0.kernel.bb
  26     barebox:/ erase /dev/nand0.rootfs.bb; cp /mnt/tftp/rootfs.ubi /dev/nand0.rootfs.bb
  27     barebox:/ erase dev/env0
  28     barebox:/ reset